PROVN OF OFFRS and JCOS ACCN AT KIARI MIL STN UNDER GE 860 EWS

NOTE: Schedule ‘A’ Part - I to Part -X are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Total amount of Sch 'A' Part - I (BUILDING Works)

Total amount of Sch 'A' Part - II (SITE CLEARANCE WORKS)

Total amount of Sch ‘A’ Part - III (INTERNAL WATER SUPPLY)

Total amount of Sch ‘A’ Part - IV (INTERNAL ELECTRIC SUPPLY))

Total amount of Sch ‘A’ Part - V (PROTECTIVE WORKS)

Total amount of Sch ‘A’ Part - VI (HARDSTANDING WORKS)

Total amount of Sch ‘A’ Part - VII (SEWAGE DISPOSAL)

Total amount of Sch 'A' Part - VIII (EXTERNAL ELECTRIC SUPPLY WORKS)

Total amount of Sch ‘A’ Part -IX ( EXTRNAL WATER SUPPLY WORKS)

Total amount of Sch ‘A’ Part - X (HOT WATER SUPPLY)

SCH 'A PART - XI (Miscellaneous B/R and E/M works for Sch 'A' Part-II to Part-X) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 5 signifies this fact only

Supply and fixing of LED building security light, pressure die cast aluminum housing, 20/25 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 5 mtr from ground with MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge. NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.

Supply and fixing of LED Garden Light 9 W 220 V,single phase,IP-65 with post top fitting,powder coated aluminium die cast and spun aluminium with clear/opal diffuser suitable for landscape lighting complete all as specified and as directed by the Engineer-in-Charge.

Soakage wells of size 3M dia x 4.5 M effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed.

(a) Bus bar chamber having 4 Aluminium strip Bus bar having air insulated and PVC sheathed 100 A Capacity fixed in position with required nuts bolts and porceline insulator etc. (b) MCB TPN 40 Amp, 16 KA, 415 V). ( Incoming )-01 No (c) MCB TPN 40 Amp, 16 KA, 415 V). ( Outgoing )-01 No (d) MCB SPN 25 Amp(Outgoing)-01 No (e) Phase indicator lamp LED Type -1 set Note : Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC platform including necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

(a) Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint) for each VCB Module. (b) Capacitive voltage indication fixed type system with LED for all the module (c) SF6 Gas pressure indicator on the gas tank. (d) Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO . (e) CT shall be minimum 80-40/1A ,2.5VA , 5P20 - 3 nos. for protection (f) Touch proof cable termination kit to be provided in each module

Supply and fixing nitryle rubber insulation for tubing of size suitable for any pipe size & 32mm-50 mm thick outer dia, conductivity suitable for temperature range of (-)40ºC to (+)40ºC and class-0 fire resistance, water vapour permeability > 7000 and CFC free complete all as specified and directed. Note:-Area will be calculated based on outer dia.

Providing and fixing of aluminium cladding of 0.32 mm thick Aluminium Sheet on insulated pipes 32 mm dia (for exposed pipes only) but, 40 mm dia pipe (for exposed pipes only) complete all as specified and directed.

Supply and fixing insulation tubing of size suitable for 20mm dia pipe and 13mm thick conductivity of nitrile rubber tubes class "0" with 0.32mm thick plain aluminium steel alloy 31000 H4 in ridges, hips, valley gutter drip and straight flashing of 28SWG thickness complete all as specified and directed.

Supply and fixing insulation tubing of size suitable for 25mm dia pipe and 13mm thick conductivity of nitrile rubber tubes class "0" with 0.32mm thick plain aluminium steel alloy 31000 H4 in ridges, hips, valley gutter drip and straight flashing of 28SWG complete all as specified and directed.