Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-Finance VILLAGE BHAMNA KAHANGARH ROAD SAMANA DISTT PATIALA | SAMANA | PATIALA | PUNJAB | L1 | Accepted-Finance ACCEPTED | |
| 2 | L2₹3.7 L+₹65,735.95 (21.9%)Rejected-Finance | L2 | Rejected-Finance REJECTED | |
| 3 | L3₹3.7 L+₹70,750.29 (23.6%)Rejected-Finance | L3 | Rejected-Finance REJECTED |
| Sl No | Description | Qty | Unit | Sanjeev Kumar Govt. Contractor L1 | Sushma Devi L2 | Jagdeep Sharma L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiseling / wedging out of hard /soft rock including dewatering in saturated soil up to all leads and lifts stacking the excavated soil / materials not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 centimeter layers when required into plinths side of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the direction of Engineer-in -Charge. | 16.2 | Cum | 525 ₹8,505 Lowest | 700 ₹11,340 | 797 ₹12,911.4 |
| 2.00 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge. | 5.4 | Cum | 7,990 ₹43,146 Lowest | 9,800 ₹52,920 | 9,851 ₹53,195.4 |
| 3.00 | Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Walls (any thickness but not exceeding 0.10 meter thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge. | 6.68 | Cum | 8,400 ₹56,112 Lowest | 11,200 ₹74,816 | 11,466 ₹76,592.88 |
| 4.00Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:- | ||||||
| 4.10 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge. | 74.25 | Sqm. | 325 ₹24,131.25 Lowest | 380 ₹28,215 | 390 ₹28,957.5 |
| 5.00 | 2nd class brick masnory in square or rectangular pillar in cement mortar 1:6 ( one cement , six sand) complete within all leads and liftsas per the direction of Engineer In Charge . | 14.02 | Cum | 9,500 ₹1,33,190 Lowest | 11,500 ₹1,61,230 | 11,740 ₹1,64,594.8 |
| 6.00 | Providing Tor steel reinforcement for RCC.work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge. | 267.2 | Kgs. | 80 ₹21,376 Lowest | 85 ₹22,712 | 84 ₹22,444.8 |
| 7.00 | Steel work welded in built-up section, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channels, angle cleats as in main and cross beam, hip and jack rafters, purlins connected to common rafters, steel gate and like within all leads and lifts as per the direction of Engineer-in- Charge. | 120.64 | Kgs. | 85 ₹10,254.4 | 90 ₹10,857.6 | 69 ₹8,324.16 Lowest |
| 8.00 | Providing and fixing M.S. pressed but hinges with necessary screw 125x65x2.12 mm with in all lead and lifts.as per direction of Engineer in Charge. | 6 | Nos. | 30 ₹180 Lowest | 50 ₹300 | 48 ₹288 |
| 9.00 | Providing and fixing oxdized M.S. sliding door bolts with nuts and screws etc. complete 300x16mm within all leads and lifts as per the direction of Engineer-in -Charge. | 12 | Nos. | 230 ₹2,760 Lowest | 250 ₹3,000 | 258 ₹3,096 |
Tender Value
₹3.7 L
EMD Value
₹7,408
Closing Date
1 Jan 2026, 4:00 pmClosed
EXECUTIVE ENGINEER
JAL SHAKTI DIVISION CHOWARI
Restoration of rain damages to FIS Dhundiara in GP Jiunta Tehsil Dalhousie Distt Chamba HP SH C o brick masonry fencing, and Steel Gate 2 Nos Type III residence at Dhundiara Bangla
2025_HPIPH_124097_1
NIT NO 13874-13973 DATED 19-12-2025
Open Tender
Civil Works - Water Works
Item Rate
60 days
CHOWARI CHAMBA HP
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹7,408
19 Feb 2026
23 Dec 2025
2 Jan 2026
23 Dec 2025
1 Jan 2026
23 Dec 2025
23 Dec 2025 - 1 Jan 2026
Excavation in foundations trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiseling / wedging out of hard /soft rock including dewatering in saturated soil up to all leads and lifts stacking the excavated soil / materials not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 centimeter layers when required into plinths side of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the direction of Engineer-in -Charge.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge.
Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Walls (any thickness but not exceeding 0.10 meter thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.
Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.
2nd class brick masnory in square or rectangular pillar in cement mortar 1:6 ( one cement , six sand) complete within all leads and liftsas per the direction of Engineer In Charge .
Providing Tor steel reinforcement for RCC.work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge.
Steel work welded in built-up section, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channels, angle cleats as in main and cross beam, hip and jack rafters, purlins connected to common rafters, steel gate and like within all leads and lifts as per the direction of Engineer-in- Charge.
Providing and fixing M.S. pressed but hinges with necessary screw 125x65x2.12 mm with in all lead and lifts.as per direction of Engineer in Charge.
Providing and fixing oxdized M.S. sliding door bolts with nuts and screws etc. complete 300x16mm within all leads and lifts as per the direction of Engineer-in -Charge.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
BOQ_182367.xls
BOQ • 0.28 MB
F68.pdf
Tender Documents • 1.98 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .