REPAIRS OF PATCHES, JOINT FILLING, PAINTING OF RUNWAY, DISPERSAL, RCH HUT AND TAXI TRACK AT INS UTKROSH, PORTBLAIR

Amount

Material and labour for preparing old treated black top surfaces/concrete surfaces of runway and painting to lines, dashes, arrows, letters etc exceeding 10cm width with One coat of road marking water soluble paint, white all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old treated Retro Reflective surfaces/concrete surfaces of taxi track/runway and applying a coat of Retro Reflective water borne acrylic air field marking paint yellow colour and black colour border over dispersal/ taxi track including glass beads as per manufacturer's specification all as specified and as directed. MAKE : APCOTRAK WBR - Asian Paint /Shalimar WB HB/LB

M&L preparing old surfaces of wall and applying one coat of check pattern of premium quality acrylic based matt finish, exterior antifungal paint all as specified and as directed.

Material and labour for cutting, removing damaged portion in square/rectangular shape on concrete pavement of runway/taxi track, cleaning the surface with wire brush or cloth and removing the dirt, dust or removing the wetness/dampness by means of dryer and laying of ready mix geocrete material and levelled the surfaces to match with existing surfaces all as per manufacturers instructions with thickness not exceeding 50 mm all as directed by Engineer-in-Charge. (Each Pothole not exceeding 1 sqm )

Material and labour for cutting removing damage portion in square rectangular shape cleaning the surface with wire brush or cloth and removing the dirt dust or removing the wetness/dampness by means of dryer and laying of ready to use shalipatch material as per manufacturer instructions and application methodology consolidating with rammer of thickness 50 mm levelled the surfaces to match with existing surfaces all as per rmanufacturers instructions and as directed by Engineer-in-Charge. (Each Pothole not exceeding 1 sqm ) . Make:- STP/ Shalimar

Racking out existing filling in expansion joints of any width and depth upto filler board and making it perfectly " U " shapped with vertical sides by means of mechanical cutter and cleaning the joint, removing the sticky materials as well as loose compound and providing polyethylene backup rod of suitable size and applying a coat of primer of approved make to sides and bottom of joints and filling with polyurethane joint sealent of approved make all as per manufacturer's instructions and as directed by Engineer-in-Charge. Make: FOSROC/CHOKSEY/MARUTI BITUMEN

Racking out existing filling in dummy/construction joints of any width and depth 25mm and making it perfectly " U " shapped with vertical sides by means of mechanical cutter and cleaning the joint, removing the sticky materials as well as loose compound and providing polyethylene backup rod of suitable size and applying a coat of primer of approved make to sides and bottom of joints and filling with polyurethane joint sealent of approved make all as per manufacturer's instructions and as directed by Engineer-in-Charge. Make: FOSROC/CHOKSEY/MARUTI BITUMEN

Supply and fixing in repairs black acrylic sheet 4 to 5 mm thick with GI screws, washers and nut bolts etc.for "GO" display board all as directed .

Supply and fixing in repairs 25mm nominal bore UPVC pipe 10kgf/sqcm(class-5 as per IS 4985-2000) fixed with galvanised iron/mild steel bushes and screws etc.to the "GO" display board all as directed .

Supply and fixing fluorescent self adhesive radium reflective tape, deep orange colour, cut to shape as in letters, size of letter over 10 cm width or grith all as directed by Engineer-in-Charge .

M/s Sriya Enterprises

Caliber Engineers