REPAIRS RESURFACING OF ROADS, ROADSIDE FURNITURE

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm ( depth exceeding 50 mm but n. exc 100 mm) including stacking usable materials for re-use and removing rubbish to a distance n. exc 50 m complete all as specified and directed.

M & L for 75 mm thick ( Compacted thickness) WBM with coarse aggregate of grading 2 ( 63 to 40 mm size) or of grading 3 ( 50 to 20 mm size) of granite, trap, or basalt, spread, rolled and consolidated to required gradient and camber complete all as specified and directed.

All as per Srl item No 2 here-in-before but except aggregate complete all as specified and directed.

Preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc.and applying evenly a priming/ tack coat with bituminous primer @ 5Kgs/10 Sqm, using paving bitumen complete all as specified and directed.

All as per srl item No 04 here-in-before but preparing unsurfaced water boumd macadam surfaces and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 10 Kg per 10 Sqm complete all as specified and directed.

Semi-dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using Paving bitumen any penetration and rolled with 8 to 12 ton power roller and compacted to required camber and gradient complete all as specified and directed. (Note : Mixing to be carried out at Hot mixing Plant and laid by mechanical paver)

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths, etc. cutting around edges to at least 25mm in depth and making good by applying tack coat at @ 5 Kg/10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8Kg/10 Sqm, binded with 0.09 Cum of stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chipping ) depth of pot holes exceeding 30mm by using paving bitumen complete all as specified and directed.

M & L for premixed bituminious macadam with 4.00% of binder content by weight of total mix using paving bitumen VG-30 laid with self propelling mechanical paver, rolled & compacted to required gradient and cabmer ( consolidated thickness upto maximum 75 mm or less ) to make good the cut edges of roads etc complete all as specified and directed. (Note: scarifying shall be measured under item no-1 and priming coat shall be measured under item no 7)

S & F solar stud, made of aluminium alloy and construction, size 125 x 125 x 25mm, solar powered by monocrystal solar panel, having one high capacity Ni-Cd rechargeable battery for power back upto 12 Hrs and 3 Nos LEDs-010mm each side total 06 nos, viewer distance 1000mtrs, fixing with nail/ screws/fastener/ polymer adhesive/ epoxy bond to the road surfaces, after preparation and making even surfaces, complete all as specified and directed. ( Make : Dark Eye/ /Green-lite/3M or equivalent)

M & L Preparation of new / old road surfaces and applying reflective thermoplastic road marking paint (White or golden yellow) of minimum 2.50 mm thick (conforming to BIS-3262), single coat as in centre line and edge line road marking of 150/ 100mm width using 'HOT MARK' by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler as specified in table 803.4 of MORTH specification, thermoplastic requirement for glass beads shall be as specified in (intermix) type-I, MOST/BS 6088A and road marking shall done as per provisions contained in IRC-35-1997, complete all as specified and directed.

S&F in repair dual directional reflective road studs (cat eye) of impact resistant plastic stud 110mm X 110mm, double moulded solid state having ultra-voilet resistant colour (white/red/yellow) with four round disc containging 28x2-56 mini retro reflective glass beass of colour white/red/yellow to a side provided with L-key steel 12mm dia bolt along with ABS plastic stem of length 55mm for fixing on road with epoxy adhesive complete all as specified and directed. ( Make : Dark Eye/ /Green-lite/3M or equivalent)

S & F metal guide post/delinator, high performance, 02 Nos, 100mm dia reflectors of high reflection, made of PMMA and mounted on mild steel pipe of 50mm bore, duly powder coated, anti-rust and anti-theft steel net. Height not less than 800mm, complete all as specified and directed. ( Make : Model No DA 952 GP Dark Eye/Gunnebo/yash/Green-lite Note :- Cost of PCC, M-10 (1:3:6), type C-1 (using 20mm graded crushd stone agg) and earth wk incl excavation etc shall be deemed incl in quoted rates.)

M& L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with paving bitumen of grade VG-30 with 5.5% binder contents by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory power roller laid with mechanical paver including used processed plastic content to mix up with binder content during hot mixing all as specified and as directed. Note:-Processed plastic content shall be measured and paid seperately

Supply only processed plastic content to mix up with binder content during hot mixing all as specified and as directed. Make : KK Plastic Waste management Ltd

M&L for painting 2mm to 3mm thick road marking strips n.exc 10 cm width or girth for layout of centre line,dashes, rows, speed brakers, writing letters etc, with thermoplastic road marking paint (reflective) of specified shade or colour by using fully automatic thermoplastic paint applicator macine fitted with profile shoe, glass beads speser, propane tank heater and profile shoe heater oven by experienced operator on road surface incuding road marking paint spray machine as in lines, dashes letters, arrows etc complete all as specified and directed.

M&L for bituminous macadam using paving bitumen of grade VG-30 with 4% binder contents by weight of total mix, rolled and compacted to required camber of consolidation thicknes 75mm or less and gradient using 8 to 10 ton capacity vibratory roller laid with mechanincal paver all as specified and as directed.

S&F water proof energy savings and eco-friendly solar energy road stud transparent made of unbreakable ploy carbonate shell 7 clear facing designed for maintenance & free operation Powered by solar panels any colour with working time 36 to 40 hours after battery if fully charged with brightness senstive auto switch & high visibility HD's of size 125x125x25mm with shank 265 mm . including connecting screws copleted all as specified and as directed. Make Dark Eye (model No.-SKUDA-113) or equivalent in 3M.

S&F repairs for road studs (cat eye) with self two way relection 100x100x20mm (minium) single shank, plastic body or aluminum body. Lighting mode-Reflection, having visual range of 600 to 800mm globe completed make make eye (Model No SKUDA-113) or equivalent in 3M completed all as specified and as directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45 /50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150X150X300mm) type B1 complete all as specified and directed.

S&F in repasirs for plastic speed bump or speed breakers of size 500X425X75mm made of sturdy plastic, highly resistant to srvere impacts and harsh weather conditiond overtail,interlocking submit to make it bend perfectly into one firm bump made for pre coloured materials (Black& Yellow) and UV stabilised to keep intact is colour studded with reflector's on either side to make it clearly visible to mutants during night hours fixed all as per manufacture's instructions complete all as specified and directed. Make:- Dark Eye or equivalent in 3M

Applying one coart of synthetic enamel paint over cement concrete or plaster surface over 10cm grith or width not otherwise described including preparation of old painted surface all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed.

Dismantling floor, earth or wall tilling including cement mortar bedding (but not backing) and rubhish off the premises complete all as specified and directed.

Excavation over areas, n exc 1.5m deep and getting out in soft/ loose soil all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited,spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface by broken stone or boulders all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundations,filling and mass concrete all as specified and directed.

M&L for PCC 1:2:4, type B-2 (40mm graded stone aggregate) as in path finished even & fair of 100mm thick all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking paver block rubber moulded any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment all as specified and directed.

Ditto- all as per item No.21 above but except tiles.

Sand filling under floors or in foundations including watering consolidation sprading and levelling in layers n.exc 25cm thick,well rammimg including watering complete all as specified and directed.

Forming 20mm thick Expantion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' thickness of concrete slab in 100mm complete all as specified and directed.

Forming constraction joint 30mm deep x10mm wide filled with sealing compound Grade 'B' all as specified and directed.

Removing excavated soil material to a distance exc 1.50Km but n.exc 5.00Km and deposit where directed in soil all as specified and directed.

Taking down steel Gratings of any description area not exc 1.00 sqm fixed on wall and refixing the same in same opening after raising the level (by means of concrete) for free flow of strom water complete all as specified and directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L Paving bitumen applying evenly a priming/tack coat with bituminous primer at 3 kg per 10 sq metres complete all as specified and as directed.

Material and labour for paving Bituminous premixed carpet, 2cm consolidated thickness, with 0.27 cu.m of stone chippings mixed with 14.6 kg of binder, rolled and compacted to required camber and gradient complete all as specified and as directed.

Material and labour for paving bitumen Premixed sand seal coat with 0.06 cu.m of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting rolled and compacted to required camber and gradient using 8 to 12 ton power roller laid with mechanical paver all as directed.

Ditto all as per above item No-06 but exc 10cm width or girth

Excavating in post holes (or similar holes) each in hard/ dense soil not exc 0.5 cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick , watering, and removing surplus soil to a distance n exc 50m and making good surface

M&L for providing precast cement concret 1:2:4 type B1 using 20mm graded stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones/Kerb stone, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc,( of any section indicated), with plain fair faces, including chamfers, weatherings throating etc, and setting in mortar complete with joints to match set in cement mortar 1:6 all as specified and directed by Engr-in- Charge.

M&L Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundations, filling and mass- concrete all as specified and directed

S&F in repair stainless steel 304 series retro reflective board of size 1.20x0.75m, written on both sides. The board shall be shealted with reflective rap of blue colour high intensity plastic (HIP) 3 M letter shall be writtenn in colour and size as approved by GE. The board shall be fixed on SS post of 63mm dia 16 gauge 304 series of length 2.5m included of which 0.45 m shall be embedded in PCC complete all as specified and directed. Note:- PCC shall be measured and paid separately.

S& F in repair water proof energy saving and ecofriendly solar road stud transparent made of unbreakable poly corbonate soild aluminum alloy shell powered by solar cells panels with yellow/ red with working time 50-60 hours after fully charged with brightness sensitive auto switch and high visibility LED's of size 125x125x25mm with shank 56- 80mm including connecting screws complete all as specified and directed. Make dark Eye/3M/ or equivalant.

S & F of convex mirror size of 800mm to 1000mm dia with stainless steel post length 2.10 mtr above GL and diameter of pole 100mm including excavating post hole and filling the post hole with PCC 1:2:4 type B2 (using 40mm aggregate) all as specified and directed.

S&F in repair of powder casted MS pipe solar delineator refiectors ate positioned at the best eye guiding level so that drivers can be warned from a safe distance, the body of guide post moulded fixed on powder coated steel pipe of same hight, weight 1780gm (approx) Make: Drak Eye/ 3M

MANJUNATHA CONSTRUCTIONS