SPECIAL REPAIR TO EXISTING WIRING WITH CONCEALED COPPER WIRING AT BLDG NO P-100 (POCKET B)

Amount

Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

Taking down Ceiling fan sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

M&L painting of Ceiling fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only exhaust fan ( In Repair) and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

M& L for painting of exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface.

M&L for framed brackets of angles or tees with web and falnges cut into shape, drilled/welded, screws, rivits and plates as per required size at site with hanles etc in mild steel including two coat of paint over a coat of red oxide all as directed

M&L for concealed Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

All as per item No 11 herein before but one ceiling/exhaust fan point controlled by one, one way switch.

All as per item No 11 herein before but one light point controlled by two 2 way swithch.

All as per item No 11 herein before but one 05 Amps socket outlet point on same board.

All as per item No 11 herein before but one switch socket outlet point 5 Amps on independent board.

All as per item No. 11 here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

All as per item no 11 above but copper conductor FRLS 4 Sq mm

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

S&F Modular Modular Bell Push 6A 1 Module complete all as specified and as directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

Supply and fixing LED luminaire round/squre shape 15 watts 220 V AC surface/recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for foof ceiling/surface including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED indoor wall light 5 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for ceiling/surface model LWL 126-1 including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED indoor hanging light 30 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for ceiling hanging type model LHL 301 including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED out door wall light 25 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for ceiling/surface model L60W 102 E including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED foot light 3 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for switch board mounting model LODFTG3 including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm 35/36 watts 240 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver holders & LED lamp suitable for any type of ceiling including cionnecting up with driver three core flexible copper conductor of suitable size all as directed.

Supply and fixing LED street light fitting 35 watt 230 V AC outdoort type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including necessary mounting bracket with nut bolts and mounting on wall or roof etc including taking down unserviceable fitting all as directed.

S & F Call Bell Ding Dong AC 230 V single pole complete connecting up with flexible copperconductor cable of suitable size.

Supply and fix MCB DB, vetical MCCB as a incommer TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP 43 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

Supply and fix MCB DB, SPN, 12 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

All as per item No.36 above but DB SPN 8 way

Supply and fix MCCB 415 volts 16 KA four pole suitable for vertical TPN of capacity 100 amps including taking down unserviceable MCCB all directed

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fixing TPN/FP 40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fixing DP/TP40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia all as directed Note (i) Cutting chases will be Measured and paid seperately (ii) TV/Telephone cable provide by user section .

Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia all as directed

Supply and fix modular telphone socket RJ 11 one module including taking down unserviceable socket all as directed

Supply and fix modular TV coaial socket one module including taking down unserviceable socket all as directed

Supply and fix pre wired powerunit with 20 amps mimi MCB and plug top for AC including taking down unserviceable socket all as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring,etc and making good, cutting not exc 10 cm girth

M & L for taking down carefully the Split A/C outdoor unit of 1.0/1.5/2.00 TR from installed location after disconnecting the electrical connection and seting aside both indoor/outdoor unit complete refixing the same after complete the repair work including servicing the complete unit with replacement minor parts all as directed by Engineer-in-charge.

M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

All as per item No.51 above but 6.0 sq mm four runs .

All as per item No.51 above but 4.0 sq mm 2 runs for inverter/UPS/Solar DB and extra connections .

All as per item No.51 above but 2.5 sq mm 2 runs for inverter/UPS/Solar DB and extra connections .

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion.

Supplyng and laying of XLPE insulated armoured heavey duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sq mm 2 core including taking down userviceable cables all as directed.

All as per item No.56 but 10 sq mm 4 core

Supply and fixing LED garden lights DUNE B3 12 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for fixing in PCC foundation including connecting up with driver three core flexible copper conductor cable of suitable size all as directed by Engr- In-Charge Make Luker, Philips, Bajaj, Crompton, Halonix etc.

Supply and fixing LED gate light LGLSBG 18 watts 220 V AC with hight efficiency soft glare free diffuser, driver, holder & LED lamp suitable for fixing in GI pipe/PCC foundation including connecting up with driver three core flexible copper conductor cable of suitable size all as directed by Engr- In-Charge Make Luker, Philips, Bajaj, Crompton, Halonix etc.

Supply and fixing LED flood light LFL 100 100 watts 220 V AC with hight efficiency soft glare free diffuser glass, driver, holder & LED lamp suitable for fixing in existing location including connecting up with driver three core flexible copper conductor cable of suitable size all as directed by Engr- In-Charge Make Luker, Philips, Bajaj, Crompton, Halonix etc.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out in hard/dense soil for laying of UG cables or for errection of pole complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc 50m and depositing where directed at a level not exc1.5 m above the starting point all as specified and as directed.

Earth cushioning to UG cables using excavated soil riddled by using large sieve to separate the composite particles/roots etc and refilling in trenches all as specified and as directed. Note: Punned thickness will be measured for payment.

Supply and lay burnt bricks sub-class 'B' designation 75 for cable protection all as specified and as directed.

M&L for dismantling / cutting of existing road / path / hard standing cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) suitable for laying cable protection pipe 80 / 50 mm dia under the road / path / hard standing complete.

Material and labour for PCC (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) for making good the disturbed surface of road/path/hard standing by using cement contrete mortar 1:2:4 type B1, using 40 mm graded stone aggregate 0.45 mtr wide and 0.15 mtr thick complete all as specified and directed. including demolition of old PCC and removing the debris from site complete all as specified and as directed at site by the Engr-in-Charge.

TECKXPERT ENTERPRISES (BID ID -3343653)

SEMBA ELECTRICALS (BID ID -3344330)

V.R.Enterprises (BID ID -3340568)

K C ASSOCIATES (BID ID -3342828)

p.chinnasamy (BID ID -3343987)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3342415)

Rajapriyaconstruction (BID ID -3344364)