Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAdmitted-Finance | ₹2.6 L | L1 | Admitted-Finance |
| 2 | L2₹3.0 LAdmitted-Finance | ₹3.0 L | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Md Nashir Shah L1 | M/S MD INAYAT HUSSAIN L2 |
|---|---|---|---|---|---|
| 1.00SCHEDULE `A' PART -I (BLDG REPAIR WORK AT BN HQ CHASSAD) | |||||
| 1.01 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix). | 1.42 | Cum | 3,748.8 ₹3,748.80 | 3,976 ₹3,976 |
| 1.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). | 1.42 | Cum | 22,294 ₹22,294 | 22,720 ₹22,720 |
| 1.03 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under,including cutting the patch in proper shape ,raking out joints and preparing and plastering the surface of walls complete,including disposal of rubbish to the dumping ground,all complete as per direction of engineer in charge with cement morter 1:4 (1 cement : 4 fine sand). | 16.48 | Sqm | 16,480 ₹16,480 | 19,776 ₹19,776 |
| 1.04 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old surface providing one or more coats. | 148.27 | Sqm | 17,792.4 ₹17,792.40 | 22,240.5 ₹22,240.50 |
| 1.05 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 150.98 | Sqm | 2,02,313.2 ₹2.0 L | 2,26,470 ₹2.3 L |
Tender Value
₹2.8 L
EMD Value
₹5,500
Closing Date
15 Dec 2025, 11:00 amClosed
DIG, HQ 10 Sect AR
DIG HQ 10 Sect AR c/o 99 APO PIN - 934830
Repair/maint of PFT (Engr Store) Bldg No S/59 at Bn HQ Chassad of 8 Assam Rifles and repair/maint of Unit hospital Bldg No P/Hosp/01 at Bn HQ Chassad of 8 Assam Rifles.
2025_ARMHA_887876_1
IV.17018/Engr/MW/10 Sect/2025-26/33
Open Tender
Civil Works
Chassad 8 AR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
DIG AR, HQ 10 Sector AR
₹5,500
Yes
27 Dec 2025
2 Dec 2025
16 Dec 2025
2 Dec 2025
15 Dec 2025
2 Dec 2025
SCHEDULE `A' PART -I (BLDG REPAIR WORK AT BN HQ CHASSAD)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under,including cutting the patch in proper shape ,raking out joints and preparing and plastering the surface of walls complete,including disposal of rubbish to the dumping ground,all complete as per direction of engineer in charge with cement morter 1:4 (1 cement : 4 fine sand).
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old surface providing one or more coats.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
M/S MD INAYAT HUSSAIN (BID ID -3333371)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
BOQ_933227.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid