CENTRE PIVOT PIN ASSEMBLY FINISH MACHINE [CENTRE PIVOT PIN ASSEMBLY FINISH MACHINED FOR TRAIN18 COACHES TO DRG. NO. 72706002, ALT b. Special Condition : SUITABLE PACKING TO BE DONE TO AVOID DAMAGE DURING TRANSIT, UNLOADING AND RUST PREVENTION DURING STORAGE. ]

1)Tenderers with satisfactory past performance for same item to any railway or production unit or any other PSU of railway should be considered for placement of order. Documents such as RNote, PO copy, OEM should give authorization or MSE certificate for tendered item etc. to attached with bid documents for past performance PAST PERFORMANCE LIKE CRN, RECEIPT NOTE SHOULD BE ATTACHED ALONG WITH THE OFFER. 2)Firm should have successfully supplied the same item to any railway unit and proof ofsupply should be provided at the time of tender participation.

Please enter the Percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy incorporated in the tender conditions.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Inspection: INSPECTION BY CONSIGNEE AG. GC AND TC.

MSE Clause:- a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies: District industries Centres, KVIC, KVIB, Coir Board, NSIC,Directorate of Handicraft & Handloom or any other body specified by Ministry of MSME. [Name the agency clearly]. b] If tenderer is registered with any of the above- mentioned agencies, please indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST or women. Firm is also required to submit UDYAM Certificate. The 25 % quantity shall be considered to MSE including quantity for women owned MSEs & for SC/STowned MSEs as per extant rules and only be considered if valid certificate issued by nominated agencies is uploaded along with offer. If documents are not uploaded this benefit will not begiven to tenderer. As per extant guidelines, an enterprise registered as MSE firm with any of the organization under the Ministry of Micro, Small and Medium Enterprises shall register itself under UDYAM Registration for getting benefit under this clause.

Earnest Money Deposit (EMD): (1) EMD shall be submitted by tenderer as specified in tender schedule, along with their online offer. There shall be no exemption from submission of EMD for any tender or by any tenderer except those exempted. (2)Exemption to submit EMD will be given in the following cases :(a) Micro and Small Enterprises (MSEs) registered for the tendered item. (b) Other Railways and Government Departments. (c) Indian Ordnance Factories. (d) PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. (e) Vendors registered with Railways for the trade group of the item tendered. (f) Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. (g) Vendors registered with Railways for supply of medicine, medical equipments and consumables for these items. (h) In tenders issued against PAC, OEM in whose favour PAC has been issued (i) KVIC and ACASH for items supplied by them.

SECURITY DEPOSIT (SD): 1.0 All successful tenderers shall deposit Security Deposit (SD) amount @3% of contract value rounded off to nearest higher Rs.10, subject to maximum Rs. 50 lakhs for contract value upto Rs 50 Cr. In case of contract value above Rs 50 Cr. SD will be Rs 1 Cr. 2.0 There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following: i. The Contract value upto Rs.25 (twenty five) lakhs. ii. Other Railways and Government Departments. iii.Indian Ordnance Factories. iv. PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. v. In tenders issued against PAC, OEM in whose favour PAC has been issued. vi. KVIC and ACASH for items supplied by them. vii. Vendors registered with Railways for the trade group of the item tendered for orders valued upto their monetary limit of registration. viii. Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. ix. Vendors registered with Railways for supply of medicine, medical equipments and consumables for these items

VALIDITY OF OFFER: Tenderers to quote minimum 90 days validity of offers.

LD CLAUSE: Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of store per week or part of the week during which delivery is accepted and the upper limit for recovery of Liquidated Damages in supply contract is 10% (ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.

GST: 1. Tenderers should furnish his GSTIN with copy of registration with his offer. 2.Successful tenderer should submit an undertaking that the will pay GST collected form Railway within due date and upload the payment details in GSTIN to enable Railway (Purchaser) to obtain input tax credit. 3. Please refer para 14.3 to 14.5 of Spl. conditions& instructions for guidance of contractors revised May 2011, Amendment No.12 of August 2018 ,and GST instruction input tax credit and tax invoice as published in public document of Western Railway.4.In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned tax authority. 5. Tenderer may incorporate HSN number 8607 in the tender document. However, it shall be the responsibility of the bidders to quote correct HSN number and corresponding GST

Firm to note that single use plastic should not be used in packing. Collection of non-biodegradables old waste after successful delivery of the product/material from consignee place will be arranged by the supplier.

The delivery period shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance /Letter of Acceptance as the case maybe.

Guarantee/Warranty: As per IRS Conditions or specified in tender specification, whichever is more