REPAIR, MAINT OF STREET LIGHTS, HIGH MAST LIGHTS AND OTHER MISC WORKS

Amount

Disconnecting/taking down for repairs of fluorescent tube light/HPSV/MH/HPMV/LED street light of any wattage or size flood lights/street light fittings, replacement of worn out accessories and re-fixing on pole up to 11 mtr complete all as specified and directed. Note:- Spare parts/ lamp shall be measured and paid separately as supply only.

Disconnecting and taking down High mast light up to 25 Mtr Height including taking down mast assy by making necessary arrangement viz telescoping ladder alongwith all safety arrangement and refixing of the same after repairing complete all as specified and directed.Note:- Spare parts/ lamp shall be measured and paid separately as supply only.

S&F in repairs mild steel flat iron clamps, nut bolt of existing size for bracket on pole complete all as specified and directed

S&F in repairs tubes galvanised 40mm bore light grade bent to the shape of bracket 1.2 Mtr in length for mounting of street light fitting and fixed on pole with clamp and nut, bolt and washer with two coat paint complete all as specified and directed

Supply only constant current LED driver as per exisitng make suitable for flood light fitting 240/200 watt complete all as specified and directed Make:-Bajaj

Supply only constant current LED driver as per exisitng make suitable for flood light fitting 150 watt complete all as specified and directed. Make:-Wipro

Supply only constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Bajaj

Supply only constant current LED driver as per exisitng make suitable for street light fitting 72 watt complete all as specified and directed. Make:-Bajaj

Supply only constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Wipro

Supply only constant current LED driver as per exisitng make suitable for street light fitting 72 watt complete all as specified and directed. Make:-Havells

Supply only constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Havells

Supply only constant current LED driver as per exisitng make suitable for street light fitting 72 watt complete all as specified and directed. Make:-Halonix

Supply only constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Halonix

Supply only constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Orient

Supply only constant current LED driver as per exisitng make suitable for street light fitting 60 watt complete all as specified and directed. Make:-Orient

Supply only LED panel as per exisitng make suitable for street light fitting 72/90 watt complete all as specified and directed. Make:-Havells

Supply only LED panel as per exisitng make suitable for street light fitting 72/90 watt complete all as specified and directed. Make:-Bajaj

Supply only LED panel as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Wipro

Supply only LED panel as per exisitng make suitable for street light fitting 60 watt complete all as specified and directed. Make:-Orient

Supply only LED panel as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make:-Orient

Supply only LED panel as per exisitng make suitable for flood light fitting 150 watt complete all as specified and directed Make:-Wipro

Supply only LED panel as per exisitng make suitable for flood light fitting 200/240 watt complete all as specified and directed Make:-Bajaj

S&F in replacement of 150 watt LED flood light fittings having long life of high power LED with SMD LED exclusive innovative dia cast aluminium IP-66 built in IP-67 electronic driver with APFC, lower THD, open circuit protection, over voltage protection, surge protection up to 10KV with built in SPD & other safety as per IS-15885 part -2 ,Sec 13, IEC 60598-1 of operating voltage 140-270V avg life 50,000 hours complete manufacture prove all test certificate as per protection for minimum 2 years from manufacturing companies complete all as specified and directed. Make :- Havells JETA IRIS Cat Part No JETA IRISFLS150WLED757PSYMLTG/ Wipro cat part No LF20-192-060-57-G2/CG cat part No LFLN-150-CDL/60/Halonix Cat Part No HLFLD-ML 15-150-CWL-R

S&F in replacement of 200 watt LED flood light fittings having long life of high power LED with SMD LED exclusive innovative dia cast aluminium IP-66 built in IP-67 electronic driver with APFC, lower THD, open circuit protection, over voltage protection, surge protection up to 10KV with built in SPD & other safety as per IS-15885 part -2 ,Sec 13, IEC 60598-1 of operating voltage 140-270V avg life 50,000 hours complete manufacture prove all test certificate as per protection for minimum 2 years from manufacturing companies complete all as specified and directed. Make :- Havells JETA IRIS Cat Part No JETA VALOUR INTEGRAL Part No JETA VALOUR FL200WLED757LTG/Wipro cat part No LF20-272-060-57-G2/CG cat part No LSFO-200-CDL/60/Halonix Cat Part No HLFLD-ML 15-200-CWL-R

S&F in replacement LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass. LED shall be having LM-79 and LM-80 complied as per L-70 standard. LEDs should be tested for minimum 10,000 burning hours with 5700-6000 K CCT. Maximum power consumption shall not exceed 90W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2 core as required. (ii) LEDs used in the product shall comply with EN-62471 for photo - biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum two years. Make of LED light fitting :- Havells Cat part No ENDURAPEARLPLUSL90WLED757PASYTOPCASTHO (90 Watt LED, 5700 K )/ Wiprocat part No LR02-102-XXX-57-G2/CG cat part No LSTN-90-CDL-A/Halonix Cat Part No HLSLD-15-90-CWL-R

S&F in replacement LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass. LED shall be having LM-79 and LM-80 complied as per L-70 standard. Maximum power consumption shall not exceed 60W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2 core as required. (ii) Contractor shall produce warrinty certificate of association with LED manufacturer for minimum two years. Make of LED light fitting : Havells Cat part No ENDURAPEARLNEOSL60WLED757PASYTOPCASTHO (60 Watt LED, 5700 K )/ Wiprocat part No LR02-671-XXX-57-G2/CG cat part No LSTP-60-CDL/Halonix Cat Part No HLSLD-15-60- CWL-R

S&F in replacement timer switche for street lights control for 3 KW Single Phase rating consists of the following items :- (a) Swadeep-02EC-3KW1P (b) contactor AC3 25 Amps - 01 No (c) Incoming MCB of 25 Amps - 01 No (d) Outgoing MCB of 25 Amps - 01 No (e) complete single phase circuit wiring

S&F in replacement timer switches for street lights control for 5 KW three Phase rating consists of the following items :- (a) Swadeep-02EC-5KW3P (b) contactor AC3 16 Amps per phase - 03 No (c) Incoming MCB of 20 Amps - 01 No (d) Outgoing MCB of 20 Amps - 01 No (e) complete single phase circuit wiring

S&F in replacement stranded aluminium conductor flat twin core PVC insulated unsheathed 1100V 10 Sqmm 2 core complete all as specified and directed.

S&F in replacement stranded aluminium conductor flat twin core PVC insulated unsheathed 1100V 2.5 Sqmm 2 core complete all as specified and directed.

Supply, laying, connecting and testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 35 Sqmm, 3.5core complete all as specified and directed

All as above Srl item No 31 above but cable size 25 sqmm, 3.5 core

All as above Srl item No 31 above but cable size 16 sqmm, 4 core

All as above Srl item No 31 above but cable size 10 sqmm, 2 core

Excavation in trenches in soft/ loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed

Returning, filling, including spreeding leveling watering and well ramming in layers not exceeding 25 cm apart ccomplete all as specified and directed

Removing of surplus excavated soil to distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtrs above the starting point complete all as specified and directed

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed. Note:-Punned thickness shall be measured and paid

M&L for brick sub class 'B' laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and directed

S&F in replacement junction box triple pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size 12"x10"x4" complete all as specified and directed. Make:-Sintex/Hansal or equivalent make as approved by GE

S&F in replacement junction box single pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size 12"x10"x4" complete all as specified and directed. Make:-Sintex/Hansal or equivalent make as approved by GE

S&F in repairs pipe galvanised iron light grade 40 mm dia (ISI marked) with all fittings laid in trenches or on pole, crossing of road,fixed on wall for protection of cables complete all as specified and directed

S&F in repairs timer analog time watch FM/1 quartz 16A 250AC suitable for high mast panel complete all as specified and directed. Make:-L&T or equivalent make as approved by GE

S&F in repairs auxiliary contactor MNX-A2 415V 10A suitable for high mast panel complete all as specified and directed. Make:-L&T or equivalent make as approved by GE

S&F in repairs lower raising push botton no NC auxiliary contactor MNX-A2 415V 10A suitable for high mast panel complete all as specified and directed. Make:-L&T or equivalent make as approved by GE

S&F in repairs connector suitable for high mast panel complete all as specified and directed. Make:-L&T or equivalent make as approved by GE

S&F in repairs flate cable flexible copper of size 6 sqmm 3 core, 1100 volt grading complete all as specified and directed

S&F in repairs of chain pully motor & greasing chain pully of high mast light complete all as specified and directed

S&F in replacement post top energy saving, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source complete all as specified and directed Make:-Havells Cat part No CORALPT35WLED757PSYMTOPC or Wipro Cat Part No.LPO7-431-XXX-57-CL, 35 Watts

S&F in replacement MCB single pole and neutral 40 to 63 Amp 240 Volts 'C' series 10 KA complete all as specified and directed

S&F in replacement MCB SP 6 to 40 Amps, 240V 'C' Series 10 KA complete all as specified and directed

M&L for cutting of vegetation surrounding transformer, two poles, four pole structure at various sub station / E&M installation and remove to a distance not exc 50 mtr complete all as specified and directed

Cutting /trimming of tree branches upto 80 mm girth along LT/HT OH electric lines which or growing /touching or falling on ACSR conductor /poles or near by sub stns etc at any height from GL and making sufficient clearance not less than 1.5 mtr from ACSR conductor/ poles/ structure and taking down the same on the ground carefully avoiding the damage of and removing to a distance including stretching of conductor as required where directed complete all as specified and directed Note :- Tree cutting will be maintain for periodisity for three months depending upon the grougth of three branches.

M/s VIKAS TRADERS

trading engineers

SHRI RAM ELECTRICALS ENTERPRISES

shivansh traders