REPAIR AND UPHOLSTERING OF SOFA SETS, CHAIR REVOLVING AND OTEHR TP FURNITURE ITEMS AND REPAIR/MAINT OF STEEL, WOODEN AND MISC FURNITURE ITEMS AT AF STN LEH

Amount

Sofa sets 5 seater/4 seater/ 2seater/ single seater FD-281 S&F New components of 1st class HW (Teak/ shisham) including dismantling unservicable one all as specified and as directed. (a) Front Legs

(b) Rear legs

(c) Battens

(d) back rail (3 seater)

(e) Front rail (3 seater)

(f) Back rail (single seater)

(g) Front rail (single seater)

(h) Hand rest

(j) Providing new M & L cushion of 40 density cool foam of size 560 x 530x100mm thick duly upholstered with new tapestry cloth as approved (rate not less than Rs 400 /Mtr) complete all as specified and as directed.

(k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with 04 nos velcrow duly stitched as directed for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Cost of tapestry cloth shall not be less than Rs 400 for RM.

(l) Preparation of sufaces of sofa set 05 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from sofa set and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Sofa Set 5 Seater Spl Trade Pattern (a) Providing M & L new cushion foam of appropriate size and thickness,spring,ply and other accessories as required for sofa set spl trade pattern to make shape as per drg and re-upholstering with new tapestry (approved quality) including dismantling of old one complete all as specified and directed.

(b) Preparation of sufaces of sofa set spl trade pattern type by throughly rubbing with emery paper, applying raw/burnt seina uniformly for sofa set and polishing with mealimine wood polish one or more coats to obtain a glossy finish complete including PVC hard rubber shoes to the legs all as specified and as directed.

Chair visitors /Chair Writing steel MAP/Trade Pattern (a) M & L for re-upholstering with new tapestry/ (approved quality) for Chair visitors/chair writing of different Make and Model (SEAT & BACK) and including dismantling of old one complete all as specified and dircted.

(b) Supply and Fix New SEAT & back (Cushion,tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted.

(c) Supply and fix handle of chair visitors of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed.

(d) M&L for painting two coats of Black paint in Iron frame of Chair Visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed.

Chair computer/revolving- (a) M & L for re-upholstering with new tapestry/ (approved quality) for Chair revolving/Chair Computer of different Make and Model (SEAT & BACK) re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted.

(b) Supply and Fixing in replacement New SEAT & back (Cushion,tapestry & ply) complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted.

(c) Supply and fixing in replacement of hydraulic system of chair revolving complete all as specified and directed.

(d) Supply and fixing in replacement handle(pair) of chair revolving of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed.

(e) Supply and fixing in replacement of complete base plate of seat of chair revolving complete all as specified and directed .

(f) Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving complete all as specified and directed .

(g) Supply and fixing in replacement of coaster wheel of appropriate size heavy duty of chair revolving complete all as specified and directed .

Chair dining cushioned FD/E6/MAP/10 (R) S&F new components of 1st class HW (teak/shisham) including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Side/back/front rails

(d) Stiffener

(e) Providing new 75mm Cushion with new tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office. Cost of tapestry cloth shall not be less than Rs 400/-per meter

(f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one. Cost of tapestry cloth shall not be less than Rs 400/- per meter.

(g)Tightening of all parts/joints of whole Chair dining cushioned with bamboo pins.

(h) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

(c) Lock with duplicate keys

(d)Table top shall be made up of 18 mm thick pre-lamianted particle board of approved shade including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel

(e)Table top shall be made up of 18 mm thick pre-laminated particle board of approved shade including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel

(f) PVC shoe

(g) Preparation of old painted steel sufaces by scraping with emary paper and welding as reqiured cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel.

(h) Preparation of old painted steel sufaces by scraping with emary paper and welding as required cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel.

Table dining for 06 persons FD-30(M)/289, 273 & 239 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) wooden bracket size 100x100mm (corner)

(e) Top 18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table writing FD-249 & 275 (a) Top made out of 18 mm thick pre-laminated particle board of approved shade duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one

S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (b) Leg(long)

(c) Leg (short)

(d) Side/bottom rail

(e) Wooden bracket size 100x100mm

(f) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified and as directed.

(g) Side made out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable one all as specified and as

(h) Stiffner (long)

(j) Drawer made out of 18 mm thick particle board for front and 12 mm thick for back/side including provision of knob and locking facility including dismantling unserviceable one all as specified and as directed. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

(k) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality.

(k) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Almirah steel large (FD-67/1031/OP) S & F following components of Almirah steel large including dismantling unservicable one all as specified and as directed (a) Lock duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-Godrej/ Harrison/ Link)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

(b) Hasp & staple 100mm chromium plated

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with two coats of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

(e) S & F new curtain rod SS of size 20mm dia of 0.5mm wall thickness of locker steel along with curtain bracket.

(f) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Almirah Steel med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock with duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats externally and internally of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Teapoy FD-382/ 232 & 278 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Stiffener

(e) Wooden bracket size 50x50mm

(f) Top 18mm thick pre-laminated particle board of approved shade alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(g) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table centre FD-274 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Stiffener

(e) Top18mm thick pre-laminated particle board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Peg FD- 277 & 236/384 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Stiffener

(e) Top18mm thick pre-laminated particle board of approved shade alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

VEE KAY IND (BID ID -3424883)

DIXON ENGINEERING (BID ID -3426263)