Providing of Diesel Generator set of capacity 20KVA with four pole changeover panel each at Mahe Co-operative college for Higher Education and Mahe Co-operative College for Teacher Education, Mahe

Amount

Code No. Non PSR:- Supply erection, testing and commissioning of 20KVA DG Set with engine rated output of 16.0 KW/25.2 HP at 1500 RPM under NTP conditions complete with standard accessories coupled to make standard design alternator rated at 20KVA, 3 Phase, 4 wire, 50Hz, 0.8PF(lag), mounted on a common iron base frame, Suitably rated 1 No. Battery with leads, Suitable Silencer, fuel tank capacity not less than 65 litres, Standard Manual Control System, Set of AVM pads & Composite type acoustic enclosure with control cable.(Cooper, Kirloskar, Cummins.)

Code No. 31.284.1A:- Providing and fixing of 4 pole change over switch of STANDARD/ HAVELLS/KUNDAN/ GEM make including M.S. frame as per I.E. standard.-100 Amps (upto 50 KVA)

Code No. 31.264.1A:- Supplying and fixing of copper wire 8 SWG (4 mm dia) for earthing arrangements including bolt and nuts etc., complete.

Code No. 31.263.1:-Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia. and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I. pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround,covered with R.C.C. precast slab etc. as per I.E. standards.

Code No. 31.283.1A:- Providing and fixing of suitable M.S.exhaust pipe including 2 Nos. of M.S. bends (long), 7 Nos. of M.S. flanges, M.S. pipe Class B - 5 Rm as flexible exhaust pipe. The rate is inclusive of transportation charges for shifting of welding machine and gas cutting set to site, consumption of welding rod 10 SWG and cutting gas, providing fasterners of 10mm bolts / nuts / washers and flange gaskets including labour charges etc. as per IE standard.-65 mm dia exhaust pipe (upto 40 KVA)