Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.9 L
EMD Value
₹11,820
Closing Date
16 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
OFFICE OF THE EXECUTIVE ENGINEER REW ANANTNAG
OFFICE OF THE EXECUTIVE ENGINEER REW ANANTNAG
C/O KITCHEN SHED AT MIDDLE SCHOOL RING MUNDOO BLOCK VERINAG
2026_RDPR_300300_3
ENIT203of2025-26
Open Tender
Civil Works
Percentage
30 days
ANANTNAG
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
OFFICE OF THE EXECUTIVE ENGINEER REW ANANTNAG
₹11,820
10 Jan 2026
10 Jan 2026
17 Jan 2026
10 Jan 2026
16 Jan 2026
10 Jan 2026
Engagement of labs for clearence of site
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
P/L of dry Stone soling dully hand packed hand rammed incl stone chippings, all carriages complete with lead of 5 km
P/L cement concrete of 1:4:8mix mortar using Crushed stone aags. Of 20 mm N/S including curing complete
P/L cement concrete of 1:2:4mix mortar using Crushed stone aags. Of 20 mm N/S including curing complete
P/L cement concrete of 1:3:6 mix mortar using Crushed stone aags. Of 20mm N/S with20% plums including curing
P/L DPC 50 mm thick in 1:2:4 mix
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand)
P/F 40x 5 mm iron Hold Fast 40 cm long incld fixing to frame with 10mm dia bolts nuts & wooden plugs
P/fixing of ordinary timber planks for shuttering including removal of form work
P/fixing of ordinary timber planks for shuttering including removal of form work
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement for RCC work incl streightning, cutting, bending, placing in position & binding all complete
Supply & Filling in plinth with fine sand /Nallah Muck under floors incld watering Ramming Complete job
12 mm cement plaster of mix 1 : 4 (1 cement : 4 fine sand)
40 mm thick Cement concrete flooring in 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm NS) finished with a floating coat of neat cement including cement slurry and curing complete.
6 mm thick plaster in Cement Mortar 1:3 mix.
Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position.
Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. Imported wood (KD)
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick
Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood
150 mm Tower bolts
100 mm tower bolts
Link Godrej Al Drop Lock Type
125 mm Handle
100 mm Handle
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Stone /sand agg 40mm / 20 mm & sand Agg
Bricks
P/F of lighting points which shall incl wiring for lighting points in 1.5 sq mm PVC insulated multi strand copper wire & 2.5 sq mm PVC insulated multistrand copper wire for lighting submains, 6 amp oneway switch, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job.
P/F of Heating points which shall incl wiring for lighting points in 2.5 sq mm PVC insulated multi strand copper wire & 4 sq mm PVC insulated multistrand copper wire for heating submains, 16 amp switch socket combined , 2mm thick PVC conduit with bends, junction boxes etc 10 Amp S pole MCB, , 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job.
P/F of Fanpoints which shall incl wiring for fan points in 1.5 sq mm PVC insulated multi strand copper wire,1200 mm ceiling fan with ceiling rose& PVC Square block 350 watt electronic fan dimmer, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job.
Add provision for Signboard & photograph charges
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.43 MB
BOQ_974227.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .