COMPREHENSIVE REPAIR MAINTENANCE OF LIFTS

Amount

Material and labour for servicing / repair / maintenance of four passenger lift (OMEGA make )installed at INHS Patanjali , G+3 (total four opening) electric driven passenger lift of capacity 26 passengers, speed 1m/sec with dual control operation, AC variable, voltage variable frequency drive, electric door drive, stainless steel door and car enclosure, ARD etc with frequency once in three month (Quarterly) including oiling / greasing of moveable parts , wire rope, tightening of electric connection, change of defective spares etc including carrying out service & maintenance as per appendix 'A' & 'B' of particular specification herein after etc complete all as specified and as directed.

Material and labour for attending emergency break down ( in periods other than period for routine quarterly servicing/ repair/ maintenance of lifts as catered against item No. 1 to 5 here in before) of OMEGA make electric driven lift of any capacity with AC variable, voltage variable frequency drive, electric operated door, stainless steel door and car enclosure, ARD including change of defective spares and make the lift functional within two days of reporting by Engineer in Charge complete all as directed. NOTES FOR ITEM NOS 1 TO 6 :- (i) M&L for periodical maintenance like oiling, greasing etc as per manufacturer's instructions and as directed by Engineer in Charge. (ii) All spares to be replaced by the contractor shall be of specified make or as per existing make / as recommended by manufacturer. (iii) All spares required for repair/maintenance of lifts except consumables will be measured and paid under respective items of Sch A .Technician /Mechanic shall be well qualified from a recognized ITI or equivalent in the trade of electrical /Mechanical having authorized Govt license and minimum two years experience in the field of repairs/ maintenance/ servicing of lift

Inspector of lift governer for worthiness certificate during the currency of contract including load testing as per lift ACT and submitting the worthiness certificate to Engineer-in-Charge all as specified and as directed. Note:- All lifts will be inspected once in six months period by the competent person recognized under Department of Factories, Health & Safety, and copy of Certificate should be displayed on each lift.

Taking out 15 HP motor from (INHS Patanjali/HQ Fok) lift control room and re fixing the same in original position after rewinding of burnt winding with original gauge of super enamel copper wire replacing the worn out parts including varnishing , heating and packing etc complete all as specified and as directed.

Taking out 10 HP motor from lift control room at Command Mess (NoMs) and re fixing the same in original position after rewinding of burnt winding with original gauge of super enamel copper wire replacing the worn out parts including varnishing , heating and packing etc complete all as specified and as directed.

Taking out 7.5 HP motor from lift control room at MEWR in NSRY and re fixing the same in original position after rewinding of burnt winding with original gauge of super enamel copper wire replacing the worn out parts including varnishing ,heating and packing etc complete all as specified and as directed.

S & F in repairs shaft wiring of lift serving (G+2) good lift , at MEWR(NSRY) at Naval Base in hoist way along with replacement of maintenance box, Junction box up to lower limit switch with PVC insulated 18 core flat type with multi stranded copper conductor 0.75 Sq mm and 1.00 sq mm for earthing 1100 volts grade drawing through in and including galvanized sheet metal trunking (24 SWG) up to ground floor in hoist way for control of all floor hall push button assembly, limit switches, terminal switches, fireman switches etc complete all duly earthed at all points, suitable for complete all as specified and as directed.

S & F in repairs digital control panel of (G+2) goods lift installed at SIMA comprising with multiple micro controlled programmed chip based link to each other in net work, thermal over load protection comprising with Variable Voltage Variable Frequency drive (VVVF) (Make : OTIS/OMEGA/Fusi tech India Ltd/ADCO) based on micro controller and controlled by pulse with modulation complete with all safety devices such as over load, over current protection including rewiring proper connection with existing circuit with proper lugs, terminal connectors screws etc including suitable panel enclosure made from CRCA sheet 2 mm thick powder coated suitable for & complete all as specified and as directed.

S & F in repairs automatic rescue device (ARD) control system of lift serving G+2 lift installed at SIMA Complex suitable for 15 HP along with free maintenance battery 12 Volt , 7.2AH -08 No including suitable panel enclosure made from CRCA sheet 2 mm thick powder coated, commissioning and testing all as specified and as directed. Make : Wittur/Forbedder/UTL

S & F in repairs automatic rescue device (ARD) control system of lift serving G+6 lift installed at HQ FOK bldg suitable for 10 HP along with free maintenance battery 12 Volt , 7.2AH -06 No including suitable panel enclosure made from CRCA sheet 2 mm thick powder coated, commissioning and testing complete in all as specified and as directed. Make : Wittur/Forbedder/UTL

S & F in repairs automatic rescue device (ARD) control system of lift serving G+1 lift installed at NOM bldg suitable for 7.5 HP along with free maintenance battery 12 Volt , 7.2AH -06 No including suitable panel enclosure made from CRCA sheet 2 mm thick powder coated, commissioning and testing complete in all as specified and as directed. Make : Wittur/Forbedder/UTL

S & F in repairs standard steel hair line finish (SSHL) for lift at INHS Patanjali ,304 grade, 1200mm clear opening, 2000mm height, telescopic landing door(LH) centre opening with stainless steel frame set mechanism with emergency key hole complete all as specified and as directed Make : Wittur/Omega/Fermator

S & F in repairs standard steel hair line finish door (SSHL) for lift at INHS Patanjali, 1200 mm telescopic car door(LH) with operator complete all as specified and as directed Make : Wittur/Omega/Fermator

S & F in repairs standard steel hair line finish (SSHL) in MEWR goods lift at SIMA Complex , 304 grade, 1600mm clear opening, 2000mm height, telescopic landing door centre opening with stainless steel frame set mechanism with emergency key hole in complete all as specified and as directed . Make:Wittur/Omega/Fermator

S & F in repairs standard steel hair line finish door (SSHL) for lift at SIMA Complex ,1600 mm telescopic auto door (car) with operator complete all as specified and as directed Make:Wittur/Omega/Fermator

Supply and fixing in repairs 15 HP traction machine motor of lift serving (G+3) lift installed at INHS Patanjali including commissioning and testing complete in complete all as specified and as directed. Make :Sharp or equivalent as approved by GE

Supply & Fix in repairs gearbox of lift serving (G+3) lift installed at INHS Patanjali, suitable for 15 HP traction machine including commissioning and testing complete in lift complete all as specified and as directed. Make : Sharp or equivalent as approved by GE

Supply & Fix in repairs Base stand of lift serving (G+3) lift installed at INHS Patanjali for 15 HP motor and gearbox including commissioning and testing complete all as specified and as directed. Make: Sharp or equivalent as approved by GE

S & F in repairs infrared door sensor of any type with new full beam infrared sensor up to full length of car door of opening 0.80m x 2.00m complete all as specified and as directed. Make :ADCO or equivalent as approved by GE.

S & F in repairs steel wire rope of 13 mm dia, 18/19 constructions complete all as specified and as directed. Make : Usha Martin or equivalent as approved by GE.

S & F in repairs thimble set complete all as specified and as directed .

Supply & Fix in repairs machine base and diverter pully of size 300 mm complete all as specified and as directed.

M&L for repairing 800 mm auto door (car) & landing door drive unit with complete assembly connected with car door of the cabin for making smooth functioning of the car door at MEWR passenger lift complete all as specified and as directed.

S & F in repairs digital control panel of (G+6) goods lift installed at HQ FOK comprising with multiple micro controlled programmed chip based link to each other in net work, thermal over load protection including rewiring proper connection with existing circuit with proper lugs, terminal connectors screws etc including suitable panel enclousre made from CRCA sheet 2 mm thick powder coated suitable complete all as specified and as directed. Make : Otis/Omega/Fusi tech India Ltd/ADCO

Supply and fixing in repairs 7.5 HP traction machine lift serving (G+1) lift installed at Naval Officer lift (NOM) including commissioning and testing complete in complete all as specified and as directed. Make : Sharp or equivalent as approved by GE

Supply & Fix in repairs overload sensor for lifts complete all as specified and as directed.

Supply only in repairs for following parts of lifts as per existing Make :-

(a) Car Ventilating fans 300 mm sweep

(b) ARD battery 12 volt 7.5 AH

(d) Door Belt

(e) Voice announcement card

ANKIT SHIP REPAIRERS AND SUPPLIERS

MALLIKARJUN ENGG. WORKS