ADDITION/ALTERATION TO BUILDING No. IS/137-A AT SQAE(A) KIRKEE AND PROVISION OF VITRIFIED TILES ON FIRST FLOOR OF BLDG No. P-594-A OF NAI AT KIRKEE

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 but n exc n.exc 4 Sqm each including making good the disturbed surfaces complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) area n.exc 1.5 Sqm each (doors/windows any type) including making good the disturbed surfaces complete all as specified and directed

Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium sections as in frames and shutters for doors,windows, ventilators any type , partitions,with one or more rebates including joining cleat for fixing glazing clips, ruber neoprene packing,handles,hinges and other builders hardware,anodised aluminum snap beading screws etc. complete all as specified and directed. NOTE The rate quoted is deemed to be inclusive of all fixtures and fittings,powder coating but not inclusive of glass and wire cloth which shall be measured and paid separately. However for measurement purpose the `kg' will be worked out as per the weight of aluminium section actually incorporated at site and the element of fittings and fixtures is deemed to be included in the rate quoted per kg.

Supply and fix 4.0mm thick sheet glass,ordinary quality ground or obscured or frosted, on one side not exceeding 0.5 sq. m in each pane fixed with PVC/neoprene gasket all as specified and directed

Supply and fix 4mm thick aluminium composite panel board of approved decorative choice lamination on both sides with decorative choice lamination on one side and other side balancing white lamination as in aluminium partition work including necessary joining cleats, glazing clip, rubber neoprene packing complete all as specified and directed

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed

Supply and fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and necessary cutting and making good the disturbed surfaces all as specified and directed

Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty all as specified and directed

Material and labour for providing second class hardwood as in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints all as specified and directed

Supply and fix 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both sides faces covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches, or other fittings all as specified and directed

Material and labour for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in hold fasts,lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating , as directed all as specified and directed

Supply and fix in opening factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet instead of plain colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube all as specified and directed

Supplying & fixing in the frame at site factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC sheet PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge., and joined together with solvent cement, all as per specification & drawing and as directed.

Supply & fix Aluminium anodised,barrel tower bolts of extruded section length of bolt 150 mm all as specified and directed.

Supply & fix Extruded aluminium alloy handle of size 150mm, fabricated type,anodised of approved pattern/design all as specified and directed.

Supply & fix Mild steel sliding door bolts,Length of bolt 300 mm plate type,stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

Supply & fix Mild steel pressed handle of size 150mm, oval type, stove enamelled black, of approved pattern/design all as specified and directed.

Supply & fix Butt hinge of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and directed.

Supply & fix in repairs anodised aluminium rail 20mm dia as in curtain rod all as specified and directed.

Material and labour for use and waste of steel formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. flat rough finished surfaces of concrete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as directed.

Demolition of Stone slabs and or tiles of any description, any type or thickness in floors, aprons and in vertical surfaces including screed/back coat etc all as directed.

Material and labour for providing Vitrified Ceramic tiles ultra/double charged (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Material and labour for providing Vitrified Ceramic tiles ultra/double charged (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces like skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick back coat in cement mortar (1:4) all as specified and directed.

Material and labour for providing coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Material and labour for providing coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick in vertical surfaces like skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick back coat in cement mortar (1:4) all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed.

Material and labour for providing brickwork with sub class burnt ‘B’ bricks,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) all as specified and directed.

Material and labour for providing brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) all as specified and directed.

Material and labour for providing 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.to match laid over and including 20mm thick screed bed in cement mortar (1:6) all as specified and directed.

Material and labour for rounding (half round) to edges of 20mm thick granite stone slabs one edge, such as in steps,cooking platform, and other similar situations including grinding and polishing all as specified and directed

Material and labour for providing Cement concrete 1:3:6 type C2 (using 20mm graded stone aggregates) as in surface channels and drains all as specified and directed NOTE : Extra labour in forming channels shall be paid for in addition under relevant item of BOQ and deduction from the volume of concrete shall be made for the channel opening.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and directed

Material and labour for rendering 10mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces of walls and finishing the surfaces even and smooth using 3mm thick wall care putty all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls mixed with water proofing compound @ 2%by weight of cement and finishing the surfaces even and smooth without using extra cement all as specified and directed. NOTE Supply only integral waterproofing compound shall be measured and paid separately

Material and labour for rendering 5mm thick in cement mortar (1:3) on surfaces of ceilings and finishing the surfaces even and smooth without using extra cement all as specified and directed

Supply only integral waterproofing compound all as specified and directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed

Material and labour for providing POP board false ceiling 12mm thick fixed in galvanised iron grid work including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including painting the exposed surfaces of board with oil bound distemper (of approved tint) over a coat of primer complete all as specified all as specified and directed

Material & Labour for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint (Apex Paint Suprema anti fungal) over a coat of primer (applied as per manufacturers instructions) all as specified and directed.

Material & Labour for preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed.

Material & Labour for complete removal of existing treatment from previously/old treated surfaces of ceilings and applying three coats of white wash including preparation of surfaces all as specified and directed.

Material & Labour for complete removal of existing treatment from interior surfaces of walls, applying 3mm thick wall care putty and applying two coats of emulsion paint (Tractor Emulsion Suprema or equivalent in approved make listed in p.s.) of approved tint over a coat of primer (applied as per manufacturers instructions) including preparation of surfaces all as specified and directed.

Material & Labour for complete removal of existing treatment from previously/old treated surfaces of walls and applying two coats of cement paint including preparation of surfaces all as specified and directed.

Material & Labour for complete removal of existing treatment from surfaces of walls and applying two coats of exterior emulsion paint (Apex Paint Suprema anti fungal) over a coat of primer (applied as per manufacturers instructions) including preparation of surfaces all as specified and directed.

Material & Labour for preparation of old painted surfaces of steel over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material & Labour for POP corner moulding 150mm girth with screws etc of approved pattern/design all as specified and directed.

Material & Labour for preparation of new or previously untreated surfaces of wood and wood base products over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high

Taking up or down steel tubing 15mm bore dia of pipe and connections,including cleaning and refixing in new or old position (Walls, ceiling, floors, etc) including necessary cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth all as specified and directed

Taking up or down steel tubing 20mm bore dia of pipe and connections,including cleaning and refixing in new or old position (Walls, ceiling, floors, etc) including necessary cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth all as specified and directed

Supply lay connect and test 15mm bore dia of pipe medium grade,galvanised steel tubing including screwed socket joints, together including all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs,complete to walls ceilings and floors including taking up or down steel tubing including necessary cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth all as specified and directed

Supply lay connect and test 20mm bore dia of pipe medium grade,galvanised steel tubing including screwed socket joints, together including all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs,complete to walls ceilings and floors including taking up or down steel tubing including necessary cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth all as specified and directed

Supply and fix in repairs 15mm bore dia of pipe fancy type bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed

Supply and fix in repairs 15mm bore dia of pipe fancy type, Stop valves cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed

Material and labour for providing cement concrete 1:2:4 type B1(using 20mm graded stone aggregates) as in roof kerbs or mud stops,rounded or chamfered on edges all as specified and directed

Supply and fix Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) all as specified and directed

Supply and fix grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed

Supply and fix brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated screws all as specified and directed

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed

Supply and fix in repairs vitreous china wash hand basin(WHB), star white countersunk of size 560mm x 435mm and 15mm bore dia of pipe fancy type, Pillar taps, long neck.cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including brass chromium plated bottle traps (bore of trap 40 mm) for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed including 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (minimum weight 45gms) all as specified and directed. Make Cat No.10076 of Hindware (WHB) or equivalent in makes approved in particular specifications

Material and labour for use and waste of steel formwork to to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. flat rough finished surfaces of concrete all as specified and directed

Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,including one 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including a pair of painted cast iron brackets, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..chromium plated health faucet (Make ALE-ESS-583 of ESS) with stand 1.5m flexible lead including two way brass chromium plated 15mm bore dia of pipe angular stop cock and including toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws all as specified and directed.

Supply & Fix in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests,including connection to trap and to flushing pipe, anti-syphonage pipe, etc,including lime concrete bedding as specified in SSR part II and including 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

Supply & Fix in repairs flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

Supply & Fix in repairs Vitreous China urinal,half stall 400mm including CP urinal spreader including bowl, pipe providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cementincluding fixing fancy type angle cock with flush pipe, grating and union complete all as specified and directed. Make of urinal: Model CO583 of Parryware or equivalent approved in makes listed in particular specifications

Material and labour for use and waste of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concrete all as specified and directed

Material and labour for providing TMT steel bars 6 to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 Litres capacity (cylindrical vertical with closed top cylindrical vertical with closed top hinged cover) double layered hoisted and fixed in position all as specified in SSR Part I including supplying and fixing 20 mm bore dia of pipe Ball valves(Min weight 210 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed and including 20mm bore dia of pipe Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 Litres capacity (cylindrical vertical with closed top cylindrical vertical with closed top hinged cover) double layered hoisted and fixed in position all as specified in SSR Part I including supplying and fixing 20 mm bore dia of pipe Ball valves(Min weight 210 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed and including 20mm bore dia of pipe Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Suppply and fix 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable clamps including taking down old pipes with fittings all as specified and directed.

Suppply and fix 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable clamps including taking down old pipes with fittings all as specified and directed.

Supply and fix 110mm bore of pipe PVC (SWR) bends any radius all as specified and directed.

Supply and fix anodised aluminium brackets for curtain rod of approved type (decorative) all as specified and directed

Suppply and fix 75mm bore of pipe PVC (SWR) bends any radius all as specified and directed.

Suppply and fix PVC (SWR) floor trap,diameter of outlet100 mm plain with grating including jointing with solvent cement all as specified and directed.

Material & Labour for providing APP based polymeric membrane minimum weight not less than 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150gms/sqm) by torch application( sealed by flame) with over lap of 7.5cm longitudinally and 10 cm transversely including priming surfaces with bituminous primer polymerised primer oil based @ 0.20 kg / sqm prior to application of membrane and finally finished with a coat of solar reflective aluminum paint @ 0.100 Kg/sqm as per manufacturers instructions including taking down of existing water proofing treatment including screed bed and removal from site complete all as specified and directed.

Material and labour for screed bed 15mm thick on concrete surfaces as in roof in cement mortar 1:4 finished even and fair mixed with water proofing compound at 2% by weight of cement or as per manufacturers instructions whichever is more all as specified and directed. NOTE: Supply only integral water proofing compound shall be measured and paid separately

Supply and fix mild steel sections as in bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.

Material and labour for providing cement concrete bed 1:4:8 type D2(using 40mm graded stone aggregates) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in all as specified and directed.

Material and labour for providing Sail-glazed stoneware drain pipes Internal diameter of pipe 150mm class A laid in trenches and jointed as specified all as specified and directed.

Returning, filling in (soils), including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.

Removing excavated material (soils) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m. all as specified and directed.

Material and labour for cutting into existing manholes/soak well/septic tank for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded stone aggregates) smooth finished, and reforming benching as required for internal dia of pipe 150mm all as specified and directed

Material and labour for providing cement concrete (1:4:8) type D2 (using 40m graded stone aggregates) as in foundations,filling and mass concrete all as specified and directed

Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) nominal mix as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed NOTES: (a) Form work and reinforcement shall be measured and paid separately. (b) Quoted rates are deemed to include cost of demolition of old slab. (c) Credit for steel shall be accounted separately

Material and labour for providing TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fix sinks with drainage board made of stainless steel minimum lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size(minimum) 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed

Supply and fix Hasp and staple of size 100mm, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed

Supply and fix Continuous (piano) hinges (Width of flaps (when open) 30 mm),mild steel, bright finish or electrogalvanised all as specified and directed

Supply and fix 18/19mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed

Supply & fix Extruded aluminium alloy handle of size 100mm, fabricated type,anodised of approved pattern/design all as specified and directed.

Supply & fix second class hard wood plain fillets.square,rectangular or triangular in section, sectional area of the fillet exc 3sqcm but n.exc 6sqcm, wrought, secured with nails or brads all as specified and directed.

Material and labour for providing cement concrete (1:5:10) type E2(using 40mm graded stone aggregates) as in filling of sunken portion of slab and mass concrete all as specified and directed

Material and labour for providing 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in bedding sunken portion of slab mixed with waterproofing compound all as specified and directed NOTE Supply only integral water proofing compound shall be measured and paid separately

Material and labour for screed bed 10mm thick on concrete surfaces as in sunken portion of slab in cement mortar 1:3 finished even and fair mixed with water proofing compound at 2% by weight of cement or as per manufacturers instructions whichever is more all as specified and directed. NOTE: Supply only integral water proofing compound shall be measured and paid separately

Supply & Fix 1mm thick stainless steel (conforming to AISL-304) plate rack of size 750mm x 600mm x 254mm fixed on CP cantilever brackets at locations as directed. Make Cat Part No.SBSD-05 of JAYNA or equivalent approved in makes listed in p.s.

Taking down ceiling fan any sweep single phase 230 volt complete with down rod canopy, fan blade and deposited to MES store yard as directed complete all as specified and directed

Material & Labour for providing point wiring 1.5 Sqmm nominal area, 1100 volt, single core PVC insulated unsheathed FRLS cable with multistranded, copper conductor, with universal colour code drawn in and including concealed wiring with and including medium grade non metallic rigid PVC conduit of suitable size (not less than 20mm) including PVC insulated unsheathed earth wire with copper conductor 1100V grade of size 1.5 sq.mm & including provision of sunken modular boxes of required sizes and top cover (suitable for modular accessories) for one light point controlled by one, one way modular switch complete all as specified and directed. NOTE Quoted rate is deemed to include necessary taking down of old point wiring with switches, sockets, ceiling roses, lamp holders etc and including cutting chases in walls, floors and ceiling for concealed wiring and making good the disturbed surfaces

All as per item No 103 here-in-before but One Wall/exhaust fan point controlled by one switch complete all a specified and directed by the Engr in Charge

All as per item No 103 here-in-before but One 3 pin switch socket outlet, 5 Amp on the same board with other switches complete all a specified and directed by the Engr in Charge

All as per item No 103 here-in-before but One 3 pin 5 amps switch socket outlet point on independent board complete all a specified and directed by the Engr in Charge

All as per item No 103 here-in-before but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS, PVC insulated unsheathed multistranded copper conductor cable 1100V and with 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor 1100V as earth wire,(concealed wiring) complete all as specified and directed by Engr in Charge.

Supply and fix modular switch piano flush button single pole one way 6 Amps,240 V AC including cover plate with module complete all as specified and as directed.

Supply and fix modular switch 15 amp flush type 240 volts AC including cover plate with module.

Supply and fix modular socket 2 in 1, 2/3 pin combined, 2 module, 6 amp 240 volts AC including cover plate with module complete all as specified and as directed.

Supply and fix modular socket 2 in 1, 3 pin 6/16 amp combined,2 module, 240 volts AC including cover plate with module

Supply and fix ceiling rose surface bakelite two to three terminals/plate 6 amps 240 V AC.

Supply & fix LED tube light fitting of size 4 Feet long, including single LED tube 1x20W, 230V, surface mounted with CRCA sheet steel coated housing suitably coated in white to improve resistance against corrosion including bipin holder, connector block, etc complete with all accessories internally pre-wired and including connecting up with flat/ twisted flexible copper conductor cable with suitable size fixed to roof /ceiling/wall necessary wooden/PVC blocks etc complete all as specified and directed. Make : Bajaj, Cat No 112177, model BLTRU 20W WH VIVA or equivalent approved in makes listed in particular specifications.

Supply & Fix recessed remounted square LED down light 15W with aluminium frame LED Panel high quality difuser for uniform light and high efficiency with three core wire for connection and including connector block and all accessories including fixing the same in ceiling sheets by cutting them carefully complete all as specified and directed. Make : Bajaj, Cat No 112540 model No BGSLO Sleek 15W WH SQ or equivalent approved in makes listed in particular specifications

Supply and fix 45 watt LED, 240 volt, 6000K street light fittings on Pole/Wall with LED lamps, warm white colour with presure die cast housing with toughjened glass and individuaol LEDs with secondarty optics and IP 66 protection complete with all accessories including provision of 1.5 Sqmm multi-stranded copper conductor, three single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, as phase,neutral and earth, in and including PVC conduit pipe, all accessories etc, and connecting to ceiling rose/ junction box complete including mounting on wall with camps/brackets all as specified and directed. Make : Bajaj, model No 169884, BRTFG 45W LED WW or equivalent approved in makes listed in particular specifications

Supply and fix 120 W Flood LED light fitting, 240 volt, 6000K, with secondary optics made in high presure die cast housing with heat sink & aluminium extrusion with IP 65 protection complete with all accessories including provision of 1.5 Sqmm multi-stranded copper conductor, three single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, as phase,neutral and earth, in and including PVC conduit pipe, all accessories etc, and connecting to ceiling rose/ junction box complete all as specified and directed. Make : Bajaj, model No 112717, BJFL 120W LED or or equivalent approved in makes listed in particular specifications

Supply and fix sheet metal enclosure double door DB TPN for 440 volts 4 way with 200 Amps rated busbar flush/surface mounting double door recessed on wall all as specified and directed.

Supply and fix sheet metal enclosure DB double door single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounted all as specified and directed.

Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 2 way with flush/surface mounting single door including wooden board all as specified and directed.

Supply and fix MCB DP 40 to 63 amp, 240 Volt 10KA C series complete all as specified and as directed.

Supply and fix MCB SP,6 to 32 amps, 240 volt 10 KA, C series complete all as specified and as directed.

Supply and fix MCCB 4P 100 Amp, 16 KA, 415 Volt all as specified and as directed.

Supply & Fix PVC blanking plate complete all as specified and as directed.

Material & Labour for Sub Main Wiring (concealed type) with and including two runs of single core 6 Sqmm PVC insulated unsheathed (FRLS) cable 1100V grade with stranded copper conductor drawn in and including non metallic rigid medium grade PVC conduit of suitable size including all accessories with and including PVC insulated unsheathed (FRLS) cable 6 Sqmm copper 1100V grade with stranded copper conductorgreen colour earth wire all as specified and directed NOTE-Three runs of 6 sq.mm (Red, black and green colour) and one run of PVC conduit with accessories shall be measured and paid as one length. Rate quoted is deemed to include taking out old sub main wiring Rate quoted is also deemed to include necessary cutting chases and making good the disturbed surfaces of walls, floors,ceilings etc from locations for concealed wiring etc as directed

Supply & Fix Exhaust fan plastic body 250 mm ivory color sweep 900 RPM single phase 240 volt 50 Hz with louvers including making hole/cutting wall, grouting bolt for fixing exhaust fan and making electrical connection complete all as specified and as directed

Supply and fix wall mounting fan 400 mm (16") sweep 1300 rpm including fixing on wall making connection complete all as specified and as directed. MAKE Orient Model Wall 44 (Trendz) Slate grey or equivalent in makes listed in particular specifications

Material and labour for providing earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level connected to GI strip 32x6 mm dia by means of bolts, nuts, check nuts and washers complete including earthing pit, earthing lead 32 x 6 mm dia up to 7.5 m, 20 mm bore dia of pipe medium grade GI watering pipe, G.I. protection pipe 40mm bore dia of pipe eath pit in PCC 1:2:4 type B-1 using 20 mm graded stone agggragate RCC pit cover including earth work complete all as shown electrical plate No-03 of SSR-2009 (Part-I) NOTE:- The unit rate shall include for excavation & earth work in any type of soil/strata, PCC 1:2:4 type B-I (using 20mm graded stone aggregates) for pit & RCC 1:2:4 type B-I (using 20mm graded stone aggregates) for cover with 8mm dia TMT bars @150mm C/C both way, funnel with watering pipe 20 mm bore dia of pipe medium grade, earth lead and 20mm bore dia of pipe light grade GI pipe both 7.5 m long, wiremesh complete all as specified and directed.

Supply & Fix rigid non-metallic PVC conduit of external dia 20mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.all as directed

Material & Labour for Sub Main Wiring (concealed type) with and including two runs of single core 4 Sqmm PVC insulated unsheathed (FRLS) cable 1100V grade with stranded copper conductor drawn in and including non metallic rigid medium grade PVC conduit of suitable size including all accessories with and including PVC insulated unsheathed (FRLS) cable 4 Sqmm copper 1100V grade with stranded copper conductorgreen colour earth wire all as specified and directed NOTE-Three runs of 4 sq.mm (Red, black and green colour) and one run of PVC conduit with accessories shall be measured and paid as one length. Rate quoted is deemed to include taking out old sub main wiring Rate quoted is also deemed to include necessary cutting chases and making good the disturbed surfaces of walls, floors,ceilings etc from locations for concealed wiring etc as directed

Supply install and test hi wall split units indoor/outdoor unit complete with cordless remote control unit with minimum five star rating and EER 3.2 or above and capacity 2 TR suitable for 240V AC with rotary compressor and copper tubing and all accessories as provided by OEM all as specified and as directed. Make : Voltas Model No.SAC 245V ZZV white or Godrej Model No.GIC24ETC5-WTA or CARRIER Durafresh Model No.CAI24DN5R30F0 or Panasonic Model No.XU24KYF or Blue star Model No, IC524DATX as approved by GE.

Supply & fix single pole and neutral enclosure with a two pin and earth plug and socket complete with on single pole MCB 20 Amp, 240 Volts with top plug complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and wall hanging type designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V 15 A with accuracy of ± 2.5% and 4 to 6 sec initial delay of capacity suitable for 2 Ton Air conditioner Make V guard Make Model VND 500 15A of V Guard or equivalent approved in makes listed in particular specifications

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed

Supply and lay un reinforced pre cast cable protection covers with peak class Type 2, flat, size 250mm x 150mmx 40mm type I complete all as specified and directed

Material and labour for providing sand filling free from particles as in cushioning for protection of cable punned down all as specified and directed. NOTE : Punned thickness shall only be considered for measurement and payment as specified.

Supply & lay 40mm bore of tube steel water tubing light grade, galvanised with and including all fittings like tees, bends, unions, connector pieces etc with screwed socket joints & fixed as in cable protection laid in trenches/under roads/crossings/walls /poles etc all as specified and directed.

Supply, laying, connecting, testing and commissioning in trenches/through pipes or bare in road crossings/paths/drains/ducts/floors/ along poles/equipments etc, testing and commissioning of Cable under ground, LT, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium multi stranded conductor,1100V grade of 3.5 core 35 sqmm cross sectional area. NOTE Excavation/earthwork, sand for cushioning, protection pipe cable covers shall be measured and paid separately. Unit rates quoted shall be deemed to be inclusive of disconnecting and taking out old unserviceable cable, protection pipe etc.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each including builders hardware and refixing in the same opening all as directed.

Taking down shutters of any description exc 2 sqm each including builders hardware and refixing in the same opening all as directed.

Roughening of surfaces by picking, sweeping clean and washing down with water to remove dust, etc all as specified and directed.

Material and labour for preparation of old treated surfaces of walls and applying one coat of oil bound distemper all as specified and directed

Material & Labour for Sub Main Wiring (concealed type wiring) with and including two runs of single core 6 Sqmm PVC insulated unsheathed (FRLS) cable 1100V grade with stranded copper conductor drawn in and including non metallic rigid medium grade PVC conduit of suitable size including all accessories with and including PVC insulated unsheathed (FRLS) cable 6 Sqmm copper 1100V grade with stranded copper conductorgreen colour earth wire all as specified and directed NOTE-Three run of 6 sq.mm (Red, black and green colour) and one run of PVC conduit with accessories shall be measured and paid as one length. Rate quoted is deemed to include cost of necessary cutting chases in walls, floors ceiling etc and making good the disturbed surfaces all as directed

M/S V C SHETH

Vandan Enterprises