SMART PERIODICAL SERVICES TO OTM ACCN IN ZONE B AND C AREA, APS AND OTHER OTM MAINT WORKS AT PATIALA UNDER GE (SOUTH) PATIALA

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

Complete removal of existing treatment by scrapping with mechanical wall sander having mechanical vaccume machanism having RPM not less than 1500, sanding pad of 80 Grit having Dia 7"/9" to make the surface free from dust, loose paint, etc by skilled labour of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder with internal dust extraction system for clean environment complete all as specified and directed.

M&L for applying cement based thick wall care putty on external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade as approved) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using fully automatic airless spray machine of paint application with a flow speed of 3300psi and allow 6-8 hours to dry the surface for painting of subsequent coat up to required height and using proper scaffolding arrangments etc to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (Apex) / Berger (WEATHER COAT) / Nerolac (Excel)

M&L for preparation of existing surfaces and applying 01 coat of exterior emulsion paint (light shade) with highlighter of any existing shade, @ 10 sq.m/litre/1 coats including filling wall putty in depressions, sand papering etc and making the surface smooth by using fully automatic airless spray machine of paint application with a flow speed of 3300psi and up to required height and using proper scaffolding arrangments etc to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces by using following brands of emulsion complete all as specified and directed. Make of Exterior Emulsion : Asian (Apex) / Berger (WEATHER COAT) / Nerolac (Excel)

M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coats of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat or as recommended by the manufacturer of cement based paint by using following brands of cement based paint using brush or roller complete all as specified & as directed. Make of Cement Paint : Acro Paints (Super Acrocem) or equivalent as approved by AO