Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
2 Feb 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
78
1 condition
1.Supply to be as per tender specification 2.TIME PREFERENCECLAUSE: Tenderers will please note that in case it is decided to accept a higher price than the lowest tenderer in the interests of earlier delivery, the following clause shall be embodied in the purchase order:- It should be noted that if a contract is placed on a higher tenderer as a result of the invitation to tender, in preference to a lower acceptable offer, in consideration of offer for earlier delivery, the contractor will be liable to pay to the government the difference between the contract and that of the lowest acceptable tenderer on the basis of final price, FOR/Destination including all elements of freight, sales Tax, local taxes, duties and other incidentals in case of failure to complete the supplies in terms of such contract within the date of delivery specified in the tender and incorporated in the contract. This is in addition to and without prejudice to other right under the terms of contract.
17 conditions
(i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents->Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document - > Stores/Supply.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i). Offer validity should be minimum 60 days. (ii). Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. (iii). Tenderer should mention GST No of their firm and also HSN Code of the Item:8607
3 locations across Tamil Nadu · 800 Foot · 14 Set · 4,343 Numbers total
Pivot Assembly.
78265011~WR
78265011
Open - Indigenous
Goods
Chennai, Tamil Nadu
₹0
Exempted
2 Feb 2026
12 Jan 2026
19 items · 800 Foot · 14 Set · 4,343 Numbers total
Corner wooden inlay moulding CTI 1515 B [ Warranty Period: 30 Months after the date of d elivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 200.00 Foot |
| Total | 200 Foot | |
Corner wooden inlay moulding CTI 1818 [ Warranty Period: 30 Months after the date of del ivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 200.00 Foot |
| Total | 200 Foot | |
Corner wooden inlay moulding CTI 2525 [ Warranty Period: 30 Months after the date of del ivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 200.00 Foot |
| Total | 200 Foot | |
Corner wooden inlay moulding CTI 3535 [ Warranty Period: 30 Months after the date of del ivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 200.00 Foot |
| Total | 200 Foot | |
Set of aluminium extruded sliding profile with roller assembly (One set consists of 8 feet leng th aluminium extruded profile and 2 Nos. of roller assembly) [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 4.00 Set |
| Total | 4 Set | |
2) Sliding Door Hook Lock with 3 Keys Lock for Wooden Sliding Door (Mortise Lock) Make- VIC TAC /DIMSVY [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Star Screws of size 8x19mm make /Tecfit /Zubsha [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 1000.00 Numbers |
| Total | 1,000 Numbers | |
Star Screws of size 8x25 mm make /Tecfit /Zubsha [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 1000.00 Numbers |
| Total | 1,000 Numbers | |
Star Screws of size 8x32 mm make /Tecfit /Zubsha [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 1000.00 Numbers |
| Total | 1,000 Numbers | |
Star Screws of size 8x12 mm make/Tecfit /Zubsha [ Warranty Period: 30 Months after the d ate of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 1000.00 Numbers |
| Total | 1,000 Numbers | |
SS 3/4 inch PIPE CURTAIN PIPE BRACKET T TYPE MAKE-SUPREME / FLYRAIL [ Warranty Perio d: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 100.00 Numbers |
| Total | 100 Numbers | |
SS 3/4 inch PIPE CURTAIN PIPE BRACKET L TYPE MAKE-SUPREME / FLYRAIL [ Warranty Perio d: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 100.00 Numbers |
| Total | 100 Numbers | |
SS 3/4 inch CURTAIN PIPE(HEAVY DUTY) 6 FEET MAKE-SUPREME / FLYRAIL [ Warranty Perio d: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 20.00 Numbers |
| Total | 20 Numbers | |
Ward robe lock small with key ( Godrej multipurpose lock 9350 ) [ Warranty Period: 30 Mo nths after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 10.00 Numbers |
| Total | 10 Numbers | |
Original Teakwood single cot of size 36 x 78 inch [ Warranty Period: 30 Months after the da te of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 3.00 Numbers |
| Total | 3 Numbers | |
Original Teak wood single chair with cushion [ Warranty Period: 30 Months after the date o f delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 4.00 Numbers |
| Total | 4 Numbers | |
EXECUTIVE CHAIR-Chair Height (103-111 CM), Seat Width (53-55 CM), Seat Depth (50 CM) U pholstery cover: Leatherette | Seat Upholstery: High-Density Foam | Color: Black | Size: High Back MAKE-AR BITERR/NILKAMAL [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
Instant Fix Adhesive Fast Bonding (20-25 g) Make- Flex Kwik of Pidilite or similar in Loctite/Pol yfix/SAINTGOBIN [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 100.00 Numbers |
| Total | 100 Numbers | |
Gel coating kit containg1kg ISO polyester resin, 500g Polyester gelcoat, 50ml each of cobalt accelerator and MEKP catalyst and 250g PVA mold release Make-Carbon black/ Herenba [ Warranty Perio d: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr Section Engineer,CB,Carriage Works,PERAMBUR, SR | Tamil Nadu | 10.00 Set |
| Total | 10 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5656062.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .