CA NO. CWE/KAS-32/2023-24 REPAIR TO TOILETS, BATHROOMS, SANITARY FITTINGS AND OTHER CONNECTED B/R WORKS INCL PVC DOOR OF MARRIED AND OTM ACCN AT MIL STN DAGSHAI UNDER GE KASAULI

Amount

Dismatntling of stone slabs, precast tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engr- in-charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each including iron mongries complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each including iron mongries complete all as specified and directed

Taking down shutter of any description exe 1 Sq.m but n.exe 2.0 Sqm each complete all as specified and directed

Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards/kitchen cupboard , any thickness etc. including cover fillets complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified and directed by the Engr-in-Charge

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified and directed

Material & labour for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including demolition of brick masonary built in cement mortar including all quoins arches pillars complete all as specified and directed

Material & labour Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement including preparation of new plastered surfaces of wall including cornices, pillasters etc of bldgs and applying two coat of cement base paint on walls over a coat of primer complete all as specified and directed all as specified including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed

Material & labour Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including preparation of new plastered surfaces of wall including cornices, pillasters etc of bldgs and and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed

Material & labour Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement including preparation of new plastered surfaces of wall including cornices, pillasters etc of bldgs and applying two coat of cement base paint on walls over a coat of primer ccomplete all as specified and directed

Material & labour Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified and directed

Material & labour Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including new plastered surfaces of wall or complete removal of existing treatment by washing, rubbing down and stopping of previously treated surfaces of bldgs and applying three coat of white wash complete all as specified and directed

Material & labour Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified.including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed

Material & labour Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Ditto as per item No 15 above but in skirting set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with laid over and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material & labour for 16 to 18 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps,jambs,pillars,windows cills,cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:6 , including dismantling old unsv granite stone complete all as specified and directed

Rounding to edges of stone slabs to one edge, such as in steps cooking platform and other similar situations complete all as specified and directed

Cutting holes, square or circular of area exc. 0.20 and n exc 0.3) Sqm on granite slab for fixing of wash basin complete all as specified and directed

Supply & fixing in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including waste coupling and bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe etc complete all as specified and directed

Supply & fixing in repair stop valve 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified and directed

Supply & fixing in repair stop valve 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified and directed

Supply & fixing in repair 15mm bore Bib taps, chromium plated cast copper alloy, with crutch or butterfly handle fancy type, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engr-in-charge.

All as per item No 24 above but long body bib taps ditto-

Supply & fixing in repair 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and directed.

Supply & fixing in repair for 15mm bore pillar tap fancy type, cast copper alloy with capsten heads chromium plated screwed down, high pressure with or without letters of "HOT or Cold " with long screws shanks and flynuts screwer for iron pipe and fixed etc complete all as specified and directed.

Supply & fixing in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and directed by Engr-in-charge

Supply & fixing in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply & fixing in repair chromium plated wall mixer 3 in one with crutch and multi flow hand shower with 1.5 mtr flexible tube (chrome) including fixing to steel pipe or unions three joints to steel pipes or union and plugging and screwing to walls etc complete all as specified and directed

Supply & fixing in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including cutting for any pinning in ends of brackets and waste coupling complete all as specified and directed

Supply and fix in repair vitreous china wash basin under counter sunk type oval size 560 x 450 x 185mm shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

Supply & fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl making good to floor to match with adjoining surfaces including plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as directed by Engr-in-Charge

Supply & fixing as in repair fixing WC Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) includung provision of lime concrete bedding and PVC S trap of 110 mm dia etc complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair 10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including brackets fixed etc complete all as specified and directed

Supply & fixing in repair PVC connection 15mm bore with PTMTnuts of length 450mm etc complete all as specified and directed

Supply & fixing in repair 32mm dia PVC flexible waste pipe for urinals/WHB/sink complete all as specified and directed

Supply & fixing for 20 mm dia CPVC pipes as per IS:15778 SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete Including taking up or down unserviceable steel tubing and connections complete all as specified and directed

Supplying and laying of 20 mm dia CPVC brass Elbow fixed to CPVC pipe with CPVC solvent cement complete all as specified and directed by Engr-in-charge

Supplying and laying of 20 mm dia CPVC brassTee fixed to CPVC pipe with CPVC solvent cement complete all as specified and directed

Supply & fixing for 20 mm dia CPVC Brass MTA /FTA adaptoe fixed to CPVC / GI pipe complete all as specified and directed

Supply & fixing for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down unserviceable steel tubing and connections upto 15mm bore complete all as specified and directed

Supply & fixing for 20 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. including taking up or down unserviceable steel tubing and connections upto 20 mm bore complete all as specified and directed

Supply & fixing in repair stainless steel soap dish of approved pattern complete all as specified and directed Make: Hindware/ Somany/Cera or equivalent make as approved by GE

Supply & fixing in repairs CP grating of 100 mm da including jointing with solvent cement complete all as specified and as directed

Supply & fixing tubular towel rail in repair 20mm dia,D type, 60cm long aluminum anodised towel rail, complete all as specified and directed

Supply & fixing aluminium anodised 4 pin cloth hook hanger fixed to wall complete all as specified and as directed.

Material & labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia including taking down old unserviceble PVC water tank all as specified in SSR Part-I complete all as specified and as directed by the Engr-in-Charge

Material & labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia including taking down old unserviceble PVC water tank all as specified in SSR Part-I complete all as specified and as directed by the Engr-in-Charge

Material & labour for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified and as directed. (Reinforcement shall be measured separately) including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete all as specified and as directed.

Supply & fixing mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.

Supply & fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified including taking up or down waste and vent pipes of any type complete all as specified and as directed.

Supply & fixing for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wall complete all as specified and as directed including taking up or down waste and vent pipes of any type complete all as specified and as directed.

Supply & fixing in repair 75 mm dia PVC(SWR) floor trap, with grating including jointing with solvent cement etc complete all as specified and as directed.

Supply & fixing in repair PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) bend 110mm dia bore with access door complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) junction single(Single T) equal or unequal 110mm dia bore with access door complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) vent cowl110mm dia bore complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) bend 75mm dia bore with access door complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair PVC(SWR) junction single (Single T) equal or unequal 75 mm dia bore with access door complete all as specified and directed by Engr-in-Charge

Supply & fixing in repair CP toilet paper holder complete all as specified and as directed by Engr-in-Charge. Make : Prayag cart part No. BA-18 or equivalent make of CERA/SOMANY/ Parryware as approved by GE

Supply & fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as per specification & drawing of manufactures complete all as specified and directed

Supply & fixingFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as per specification & drawing of manufactures complete all as specified and directed by Engr-in-charge

Supply & fixing35 mm thick factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engr-in-charge

Supply & fixing35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge

Material & labour 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-charge

Supply & fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing 100mm butt hinges, cold rolled mild steel medium weight complete all as specified and directed by Engr-in-charge

Supply & fixing for Aluminium anodized 150 mm long barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-charge

Supply & fixing 150mm long extruded aluminium alloy anodized handles febricated type complete all as specified and directed by Engr-in-charge

Supply & fixing 300mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable existing complete all as specified and directed by Engr-in-charge

Supply & fixing 250 mm long Aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed by Engr-in-charge

Supply & fixing Powder Coated Anodised aluminium frame (weight of aluminium section shall not be less than 0.55kg/Mtr) for doors, windows, parttions , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge

Supply & fixing powder coated aluminium window and ventilator shutters, side hung type without sash , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 m long(2 Nos) suitable handle(1 Nos). and tower bolt 150 mm (2 No) complete all as specified and directed by Engr-in-charge

Supply & fixing for sheet glass ordinary quality 4.80mm thick in aluminium windows of area of each pane n.exc 0.50 Sqm including glazing clips , rubber beading etc, for fixed portion complete all as specificed and directed by Engr-in-Charge

Supply & fixing for Figured glass 5 mm thick pin head type in aluminium windows of area of each pane n.exc 0.50 Sqm including glazing clip and rubber packing complete all as specificed and directed by Engr-in-Charge

Supply & fixing for galvanized mild steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-charge

Supply & fixing powder coated aluminum grill of approved pattern / design with approved standard section and fixed to the existing window frame with aluminum U clip of appropriate size and CP brass / stanless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodiesd aluminium standard section around the opening all complete all as specified and directed by Engr-in-charge

Supply & fixing in repair 9mm thick pre-laminated particle board interior grade, both side lamination of approved colour and pattern fixed to wooden / aluminium frame work as in door/cupboard shutters including necessary fittings complete all as specified and directed by Engr-in-charge

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc6 & n. exc 13 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge

Material & labour in repair for 6 mmPlywood, grade BWR, type BB, fixed with screws to timber frame work all as specified including dsmantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards etc,, any thickness etc. including cover fillets complete all as specified and directed by Engr-in-charge

Supply & fixing in repair for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings complete all as specified including diismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engr-in-charge

Preparation of surface in repair of wood and wood based material, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed by Engr-in-charge

Material & labour for 18/19 mm block boards,interior grade, fixed with screws to timber frame work complete all as specified. including dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards etc,, any thickness etc. including cover fillets complete all as specified and directed by Engr-in-charge

Supply & fixing for 0.9 mm thick decorative laminate type 1 of surface finish colour and pattern as approved, fixed with approved adhesive complete all as specified and directed by Engr-in-charge

Material & labour for PVC edge strip of 18/19 mm wide, colour and pattern as approved fixed with adhesive complete all as specified and directed by Engr-in-charge

Material & labour 6mm thick teak wood lipping for block board or veneered plywood 18/19mm thick, fixed with nails in repairs complete all as specified and directed by Engr-in-charge

Supply & fixing in repair Continuous (piano) hinges,mild steel, bright finish or electrogalvanised , bright finish width of flaps(when open) 30 mm complete all as specified and directed by Engr-in-charge

Supply & fixing 100 mm long extruded stainless steel handle fabricated type anodised, complete all as specified and directed by Engr-in-charge

Supply & fixing Hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed by Engr-in-charge

Supply & fixing magnetic steel stopper catcher holder for cup board of approprite shape and size complete all as specified and directed by Engr-in-charge

Supply & fixing mild steel cupboard shutter with frame Godrej pattern, made out of 22 gauge mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type, size 65mm, 4 levers with escutcheon pushes and two keys) with & including two coats of spray painting with sysnthetic enamel paint with approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and directed by Engr-in-charge

Material & labour for cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials and complete all as specified and directed by Engr-in-charge

Material & labour for fixing 1.50 mm thick Plastic dividing strips, 38 mm wide insertred in position complete all as specified and directed by Engr-in-charge

Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 in repairs complete all as specified and directed by Engr-in-charge

Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified and directed by Engr-in-charge

Material & labour for two coats of synthetic enamel paint over coat of pink primer on new wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and as directed by the Engineer-in-Charge

Material & labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed complete all as specified and directed by Engr-in-Charge

Material & labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials ) complete all as specified and directed by Engr-in-charge

Supply & fixingfor 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and bend to curve all as directed including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge

Supply & fixingplain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified.including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge

Supply & fixing pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

Material & labour for PCC Type B1 1: 2:4 (20 mm graded stone aggregate ) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone, coping etc .including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials ) complete all as specified and directed by Engr-in-charge

Material & labour Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade and incl laid over 50 mm thick sand cushioning incl dismantling of old paver block and removal off debris to a distance n. exc 1.5 Km complete all as specified and directed by Engr-in-charge

Material & labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment and incl laid over 50 mm thick sand cushioning incl dismantling of old paver block and removal off debris to a distance n. exc 1.5 Km complete all as specified and directed by Engr-in-charge

Material & labour for Chequered cement concrete tiles 30 cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments complete all as specified and directed by Engr-in-charge

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed by Engr-in-charge

Material & labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in road side parapet / Drain complete all as specified and directed by Engr-in-charge

All as per item No 113 above but except stone obtained in item No.112 here-in-before complete all as specified and directed by Engr-in-charge

Vishal Builder

JOGINDER NATH GUPTA AND SONS

R B TRADERS

B S Ranbir and Co