CERTAIN REPAIR / MAINTENANCE WORK AT BATHINDA UNDER GE (S) BATHINDA

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window (area exceeding 1 Sqm and not exceeding 2 Sqm) with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels), frame 90 x 42 mm & sash 31 x 57 mm both having wall thickness of 2.3 ± 0.2 mm and single/double glazing bead of appropriate dimension. Window comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window (area exceeding 2 Sqm) with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels), frame 90 x 42 mm & sash 31 x 57 mm both having wall thickness of 2.3 ± 0.2 mm and single/double glazing bead of appropriate dimension. Window comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including Glass- 5mm thick tinted or figured glass pin head type complete all as specified and as directed.

Note for uPVC Window/Ventilator (items Above) Note : (i) The cost of glass, wire mesh, fasteners and all other connected accessories shall deemed to be included in the quoted unit rate. (ii) Net Opening will be measured for payment purpose. (iii) Cost for making good to cutting holes/dismantled portion during taking down old with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) uPVC frame, sash and mullion extruded profiles ± 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (v) Test certificate of Manufacturer to be provided by contractor. (vi) Embossing with Barcode of Manufacturer engraved over each Frame & shutter is mandatory.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat (Single Rebated) of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (Single Rebated) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as specified and as directed including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) (natural finish) wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm, fixing as per manufacture

Note for WPC Frame/shutter (items above) (i) Test certificate of Manufacturer to be provided by contractor. (ii) Embossing with Barcode of Manufacturer engraved over each door Frame & shutter is mandatory. (iii) Cost for making good to cutting holes/dismantled portion during taking down old with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) The cost of all other connected accessories, fixing material shall deemed to be included in the quoted unit rate.

Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators and its frame including providing and fixing hinges, pivots, Aluminium mongery/fittings and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including taking down old complete all as specified and as directed. Note :- (i) Glass & particle board shall be measured and paid separately under respective item of Sch

S&F in repair powder coated tempered aluminium tubular frame of grade 6063 fixed to wall suitable framework for fixing ACP (aluminium composite panel) sheet complete all as specified and as directed. Note- Work may be executed upto 4 storey bldgs.

S&F Prepainted aluminium composite panel 3mm thick exterior grade fixed to vertical surface (horizontal or vertical direction) with typical runners and cleat fixing system of approved make for external , column/canopy and complete weather ceiling. The surface will be furnished with PVDF coating thickness as per manufacturers standard (in FR Grade-Fire retardant) on top side and service coating on reverse side. Coating shall confirm to specification of ECCA/AAMA and confirming to the mecanical properties of panel as per detailed specification. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cup nuts and all other necessary accessories . The brackets support shall be designed as per manufactureres specification and shall with stand to wind pressure . All hardware shall be corrosion resistant . Rate include sealing, sealing shall be done by using weather resistant silicon of dow confirming 789 or approved equivalent make. including taking down old with frame complete all as specified and as directed. Note- Work may be executed upto 4 storey bldgs.

Note for Aluminium Frame/Door/Window/vents (items above) (i) The weight of Aluminium section/Frame or complete door/wndow with mongery shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after the actual weight at site. (ii) The weight shall be measured before fixing the glass/particle board. (iii) Cost for making good to cutting holes/dismantled portion during taking down old and fixing new hold fast with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply & fixing 5.5mm thick tinted sheet glass ordinary quality in squares / retangular in any size of each pane as in aluminium doors, window, partitions and similar work including cutting to shape complete all as specified and as directed.

Supply & fixing 18/19mm thick particle board , interior grade pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work all as specified and directed.

Material and labour for repairs to existing steel members of existing door frame/mild steel window frame, repair to steel gates/ door of any description area exceeding 1Sqm but not exceeding 2Sqm each (including taking down and re-fixing in same opening if required), by welding works, repair the hinges, handles, sliding bolt, tower bolt and locking arrangements, including tightening, adjustment /alignment easing to open/close etc. and ensuring proper working condition after repair, complete as specified and as directed.

Taking down steel rolling shutter of any description area exceeding 10Sqm but not exceeding 20Sqm each, height appx 6.5m, ball bearings and gear operated, and refixing in same opening and ensuring proper working condition after replacement of ball bearing, repairing to gear, broken/rusted steel members by welding, and necessary any other minor repairs, adjustment /alignment easing to slide, greasing, filling gear oil, stoppage of leakage etc complete all as directed.

Supply & fixing Floor door stopper of stainless steell (304 grade) body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F brass mortice lock, 4 Levers, verticle type of 100mm size all as specified.

Supply & fixing in replacement Hydraulic Door Closer Pelmet Arm & PVD (Physical vapor deposition) Cover Door Closer (overhead door closers), With a wide 130-degree opening and an adjustable closing speed, Load Capacity 85kg, door opening 800 to 1200mm, Commercial-grade aluminium alloy, Weather-proof and rust-resistant complete all as specified and as directed.

Supply and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body cover with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, compliance with IS 6315:1992 amended upto date complete all as specified and as directed.

Supply & fixing in replacement 40mm dia, cupboard knobs brass, polished, fixed with nut, screw and washer complete all as specified and as directed.

Supply and fixing in repair door seal with brown aluminium frame 20 mm width and 0.50 mm thick with nylon brush all over width 30 mm and length of door seal 0.90 to 1.20 m fixing for aluminium/wooden door complete all as specified and as directed.

Supply & fixing in replacement Floor door stopper of stainless steell (304 grade) body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

Supply and fixing in replacement Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

Supply and fixing in replacement stainless steel barrel tower bolt of extruded section, 100mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement stainless steel handles, fabricated type, anodised, 100mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement stainless steel sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply & fixing in replacement stainless steel sliding door bolts 150mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply & fixing in repair Continuous (piano) hinges, stainless steel, bright finish, width of flap when open 30mm complete all as specified and as directed.

Supply & fixing in repair/replacement Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed including fixing material in any situation complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4.8mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with and including fixing material as per existing or as directed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with and including fixing material as per existing or as directed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 3mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with and including fixing material as per existing or as directed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 3mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of ventilators with and including fixing material as per existing or as directed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 5mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of ventilators with and including fixing material as per existing or as directed complete all as specified and as directed.

Dismantling of boarding any description (wooden/PVC/gypsum board etc), fixed in any position, wall, ceiling boards, cup board, cabinet, false ceiling etc (particle, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M & L for Cup board shutter, shelves made out of WPC board 18/19mm thick, density over 600kg/Cum, shelves fixed with SS brackets/cleats as required complete all as specified and as directed. Note: (i) Accessories such as soft close hinges and handle shall be measured and paid separately as supply only (ii) SS brackets/cleats for fixing the shelves and other minor items not otherwise described shall be deemed to be included in the unit rate quoted. Make of WPC board :- Floresta gold series or Techno commercial equivalent in make mentioned in Appendix 'B

Supply and fixing Stainless Steel Magnetic catcher suitable for Doors of Cupboards / Wardrobes fixed with steel screw complete all as specified and as directed by Engineer-in-charge.

Supply & fixing 100mm long aluminum anodised hasp & staple, safety type, with hinge pin including bolt to hinge plate fixed with and including SS screws complete all as specified and as directed.

M & L for fabricating & fixing modular kitchen (kitchen cabinet bottom unit, over head wall unit, Loft unit etc) made out of 16mm thick WPC board, minimum density 600kg/Cum, including fixing with solvent cement adhesive and screws to form cabinet, shelves, drawers and other accessories in modular kitchen cabinet and fixing to wall using rawl plug, to readymade fittings with suitable fasteners, Provided 3 inch adjustable legs for Bottom unit carcase, WPC shelves fixed with support buttons/brackets/cleats as required complete all as specified and as directed. Note: (i) Accessories such as soft close hinges, Innotech drawer, handles shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted (ii) The actual net area of WPC board (All sides of cabinet ) as fixed at site shall be measured for payment. (iii) The 3 D design/ drawing of the modular kitchen/cabinets etc shall be provided by the GE before execution of the work. Make of WPC board :- Floresta gold series or Techno commercial equivalent in make mentioned in Appendix 'B

Supply and fixing 1mm thick glossy mica sheet white colour on external face of shutter and drawer face and on exposed edges (lipped all around exposed surfaces ) using adhesive /bonding material as per manufacturer’s instruction complete all as specified and as directed. Make :- Merino / Greenlam / Finetouch

Supply and fixing 0.725mm thick matt finish mica sheet white colour on internal face of shutter and drawer face using adhesive /bonding material as per manufacturer’s instruction complete all as specified and as directed. Make :- Merino / Greenlam / Finetouch

Supply and fixing 5mm thick tinted glass fixed with silicon on aluminium profile as kitchen cabinet (over head wall unit ) shutter complete all as specified and as directed. Note: (i) Aluminium black frame profile and soft close hinges shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted.

Supply only soft closing/self closing concealed hinges (cabinet hinge) full overlay, opening angle 105⁰, made of stainless steel (SS-304 grade), nickel plated finish complete all as specified and as directed. Make :- Hafele / Bosney / Hettich

Supply only 20 inch depth, 6 inch height Innotech drawer, soft closing, for min 30 Kg weight complete all as specified and as directed. Make :- Innotech drawer of Hettich or Techno commercial equivalent in Hafele / Bosney Note :- Base, front and back of drawer shall be measured and paid separately as supply and fixing under respective item of BOQ

Supply only Handle 200mm size, SS304 grade, nickel finish, fancy type complete all as specified and as directed.

Supply only aluminium black frame profile 45mm width complete all as specified and as directed.

Supply and fixing 6mm thick WPC board on backside of carcase including fixing material complete all as specified and as directed

Supply and fixing 9mm thick, 3 inch height PVC skirting at bootom of the carcase (kitchen cabinet bottom unit) including catcher for fixing and easy remove for cleaning complete all as specified and as directed.

Material and labour for PVC sheet wall paneling of thickness 5 mm (±0.25 mm) consisting of panels of desired size stuck on inner framework of 50 mm wide strips of 5 mm (±0.25 mm) thick Prelam PVC sheet. The panel & strips shall be sheet of Density 600 kg per cum. The strips should have in their center a grove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 255 mm between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long mild steel screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm. A groove of 2 mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a Strips of 5 mm (±0.25 mm) thick PVC sheet of width 75 mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and as directed.

Supply and fixing in replacement stainless steel sink with drainage board, AISI 304 quality grade, made out of 1.20mm thick sheet, glossy finish, for kitchen, with plugs washers and CP waste coupling of 32mm dia, waste pipe (flexible) 800mm long and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed.

Supply & fixing in replacement stainless steel sink, AISI 304 quality grade, made out of 1.20mm thick sheet, glossy finish, for kitchen or laboratory, with plugs, washers, waste coupling, waste pipe (flexible) 800mm long, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed.

Supply and fixing Kitchen Rack / Dish Rack of size 914mmx787mmx250mm (Appx size) glossy finish made out of Food Grade Stainless Steel 0.6 mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories, fixed in position as directed with SS screws/fasteners etc complete all as directed.

Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer including taking down old existing curtain rod any type complete all as specified and as directed. Note : (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply only stainless steel 202 grade brackets for fixing of 25mm bore curtain rods complete all as specified.

Supply only stainless steel 202 grade finials for fixing of 25mm bore curtain rods complete all as specified.

Supply only stainless steel 202 grade side holder for fixing of 25mm bore curtain rods complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance upto 5Km as directed as direccted from the site complete all as specified and as directed.

Dismantling of floor hearth or wall tilling/terrazzo including cement mortar bedding layer but not backing including prepared the surface clean to receive further treatment including removing rubbish material from building and thrown in low lying empty area at any distance upto 2.5 KM as direccted from the site complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge.

Dismantling of stone slab tiling including cement mortar bedding layer ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed.

Material and labour for 20 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under respective item of BOQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item.

Material and labour for 15 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under respective item of BOQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item.

Material and labour for 10 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under respective item of BOQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item.

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour for providing glazed ceramic coloured tiles (approved any shade in any pattern of light & dark/highlighters tiles etc as approved) area of each tile exceeding 0.06 Sqm and not exceeding 0.18Sqm having thickness 7-8 mm thick, Premium quality having water absorption should be between 10% to 20%, straight edge, stain free, glossy finish, laid as on vertical surfaces such as in skirting/dado etc,, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ

Material and labour for providing Double charge vitrified coloured tiles (approved light shade), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, having thickness not less than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ

Material and labour for providing Digital glazed vitrified tiles (DGVT) coloured tiles (any shade in any pattern of light & dark, highlighters tiles etc as approved) area of each tile exceeding 0.42 Sqm and not exceeding 1.0Sqm having thickness 9-10 mm thick, Premium quality having water absorption less than 0.5%, straight edge, stain free, glossy finish, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ

Material and labour for providing Anti-skid vitrified tiles, matte finish, coloured tiles (approved shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge, stain free, glossy finish, laid as in floors, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ

Material and labour 18-20mm thick Granite (approved shade like dark black, mahroom etc ), machine cut, duly factory grinding and polishing (table rubbed and polished) as in cooking platform, in steps, jambs, pillars, window-cills, for counter sunk or table top wash basin, vanities counter, as in skirting and like or where directed, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of granite, including cutting as required including cleaning and extra polishing if required complete all as specified and as directed. Note : (i) Single piece should be used in steps/cills/jambs/shelves/ equal to width of slab, including accomodate the hole for gas pipe/mixer valve (where required) and chamfering/rounding the outer edges, nothing extra shall be paid on this account (ii) Screed bed shall be measured and paid separately under respective item of BOQ

Material and labour for machine cut 18-20mm thick (minimum), Kota stone slab (size of slab not less than 550x500mm for flooring including 75mm wide white marble strips (border) all-around of room/verandah, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed. Note : (i) Screed bed as required shall be measured and paid separately under respective item of BOQ

Material and labour for machine cut 15-18mm thick, Kota stone slab as in skirting, dado and on pillar, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including machine cutting to make it square or rectangular as per site complete all as specified and as directed. Note : (i) Screed bed if required shall be measured and paid separately under respective item of BOQ

Material and labour for anti skid full body vitrified step tiles 10mm thick bull noses and self embossed or grooved as in treads & landing (single piece length wise upto 1200mm), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, complete all as specified and as directed.

Material and labour for anti skid full body vitrified step tiles 10mm thick as in riser, skirting (single piece length wise upto 1200mm), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, complete all as specified and as directed.

Material and labour for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick laid as in floor/path, made by table vibratory method using PU/rubber mould, with grey cement and colour pigment any shape, size, colour / pattern (as approved), set and jointed in neat cement slurry @ 3.00 Kg / Per Sqm complete all as specified and as directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and as directed.

Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

Dismantling of interlocking tile/paver block/brick etc (laid flat or on edge etc) laid dry or pointed including adjoining kerb stone complete all as specified and as directed.

Supply and laying/fixing 60mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Supply and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar ncluding removing from the site complete all as specified and as directed.

Demolition/taking out any type roof treatment, any thickness, like mud phuska/brick coba, APP membrane etc from roofs, including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. and washing with water and preparing the roof surface to receive further treatment including removing rubbish material from building and thrown in low lying empty area at any distance upto 5 KM as direccted complete all as specified and as directed. Note :- Only Plan area of roof will be measured for payment.Cost for removing/cutting uprooting grass, vegetations etc from area for surrounding/parapit wall etc shall deemed to be included in unit rate quoted, nothing extra shall be admissible on this account.

Material and labour for repair of surface with GP-2 (General Purpose Grout) or repair mortar upto 15mm thick as per site condition/ manufacturer’s instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturer’s instructions complete all as specified and as directed. Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list.

M and L for cleaning surface of any loose dust, dirt or slurry by means of wire brush, dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating, after primer applying single component waterproofing liquid membrane based on pure, polyurethane resin cold applied with spray, applied PU membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strength not less than 2Mpa. No leakage upto five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry film thickness), In two or more layers (each layer minimum 750 micron) or as per manufacturer’s instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed. Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. Note: - (i) Payment will be made after providing warranty certificate for 10 years from the company. (ii) The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved lab. The sample size for check should be 50x50mm randomly at any location and kept in record.

Material and labour for Providing PCC coving/ gola along vertical parapets of size 75 mm X 75 mm with concrete M20 (Nominal Mix) using 20 mm crushed stone aggregate including supply and mixing liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg complete all as specified and as directed.

Material and Labour for 10 mm thick, cementitious, polymer modified, 2-component repair mortar with added polyamide fibres in soffit of slabs, beam, columns, parapets, fins and facias at any height including preparation of substrate and applying, finishing as per the technical specifications and manufacturer's instructions complete all as specified and as directed. Note: - Two components mortar shall be MonoTop®-122 F of Sika or equivalent of Fosroc /Pidilite Dr Fixit / MBTCC (BASF) / I-CanNano.

Material and Labour for Making 'V' groove of 15mm wide and 10mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and Sealing of exposed 'V' groove with solvent-free, moisture tolerant thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C, according to ASTM C 88 1-78, Type I, Grade 3, Class B+C, compressive strength >60 N/mm2 (14 days) according to ASTM C 881 : bond strength > 10 N/mm² (7 days) according to ASTM C 882 including all required scaffolding/ladders complete all as specified and as directed. Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list.

Demolition of cement concrete and digging out (unreinforced) as in sunken floor area of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed.

Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method complete all as specified and as directed.

Method 1 (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications. (B) Bore Packing: All the borehole gaps between concrete surface and PVC pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout having dual shrinkage compensation property. Before the bore packing, surface of the PVC pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement before treatment. (D) 40 mm dia HDPE pipe to be provided as spout pipe in sunken portion.

Method 2 (A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k. After removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola on surrounding wall’s junction and seal the vertical walls. In case of core cutting on the surface, the joint is seal with non-shrink grout. (B) The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. (C) Apply12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment. (D) 40 mm dia HDPE pipe to be provided as spout pipe in sunken portion.

Make : Method 1 (Asian paint)/ Method 2 (Dr fixit) or Techno commercial equivalent in make mentioned in Appx 'B' approved by CWE Note :- (i) The treatment shall be carried out by authorised applicator (through specialized agency ) approved by CWE as per the manufacturer. (ii) PCC filling under sunken area will be measured & paid separately (iii) Treatment should be conitue upto 450mm height on vertical wall (all sides and floor) of sunken but only plan area of sunken will be measured for payment.

Material and labour for water proofing treatment to walls surfaces (above sunken) of toilets/baths (1600mm in toilet and 2100mm in bathroom on vertical wall surface) with following applications complete all as specified and as directed by Engineer-in-Charge :- (a) Applying first coat of chemical pidifin 2K (Dr Fixit) on cleaned surfaces @ 0.86 Kg/Sqm (Minimum) and drying for 24 Hours (b) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) over first coat Make : Dr fixit or Techno commercial equivalent in make mentioned in Appx 'B' approved by CWE

Material & Labour for PCC (1:5:10) type E2 using 40mm graded AAC sludge/bats as filling of sunken floors complete all as specified and as directed.

Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed.

Re-fixing old serviceable 15mm bore galvanised steel water tubing (GI pipe) but new fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling, floor etc complete all as specified and as directed. Note :- (i) Old serviceable pipe obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally and rerunning the old screw threads as required.

Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed.

Re-fixing old serviceable 20mm bore galvanised steel water tubing (GI pipe) but new fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling, floor etc complete all as specified and as directed. Note :- (i) Old serviceable pipe obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally and rerunning the old screw threads as required.

Taking up or down existing galvanised steel water tubing (GI pipe) 25mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed.

Supply & fixing of 15mm nominal dia CPVC pipes SDR 11 conform to requirement of IS 15778 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply & fixing of 20mm nominal dia CPVC pipes SDR 11 conform to requirement of IS 15778 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply & fixing of 25mm nominal dia CPVC pipes SDR 11 conform to requirement of IS 15778 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe complete all as specified and as directed.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe complete all as specified and as directed.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 25mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe complete all as specified and as directed.

NOTE FOR CPVC/GI PIPES : (i) Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with clamps/brackets keeping 100mm away from wall. (ii) Bracket, clamp, nut bolt, fastener, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (iii) Where concealed pipe laying in new location (other than taking out old pipe location) then cutting chases in wall shall be measured & paid separately under relevant item of BOQ.

Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, cutting not exc 10 cm girth in brick wall and making good, complete all as specified and as directed.

Material labour for Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, complete internal area of tank should be thoroughly cleaned up by fry jet, by Industrial Vacuum cleaner to accumulate all dirt silt and other foreign material, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge including cleaning of mouths of circulating pipes, etc. complete for the following capacity of water tanks :-

Water tanks of capacity not exceeding 250 litres

Water tanks of capacity exceeding 250 litres but not exceeding 500 litres

Water tanks of capacity exceeding 500 litres but not exceeding 1000 litres

Supply and fixing in replacement cover of PVC tank (OHT) conforming to IS 12701: 1996 (LID, hinge type design and designed to prevent monkeys and birds from accessing the tank) for 500 litres capacity but suitable for any type of tank/make, tank openings, and including nut bolts complete all as specified and as directed.

Supply and fixing in replacement cover of PVC tank (OHT) conforming to IS 12701: 1996 (LID, hinge type design and designed to prevent monkeys and birds from accessing the tank) for 1000 litres capacity but suitable for any type of tank/make, tank openings, and including nut bolts complete all as specified and as directed.

Supply & fixing Rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996, any colour white colour or as directed, of capacity 1000 litres, hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed.

Supply & fixing Rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996, any colour white colour or as directed, of capacity 500 litres, hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed.

Supply and fixing CPVC globe or gate valve (ISI marked), heavy duty, plain both ends suitable for 15mm nominal bore pipes and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply and fixing CPVC globe or gate valve (ISI marked), heavy duty, plain both ends suitable for 20mm nominal bore pipes and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply and fixing CPVC globe or gate valve (ISI marked), heavy duty, plain both ends suitable for 25mm nominal bore pipes and including CPVC solvent cement for jointing complete all as specified and as directed.

Supply and fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed.

Taking down old Bib tap/ pillar cock/ Angular Stop Cock/Stop valve/ basin mixer/Sink Mixer/Wall mixer/Over head Shower/ Bottle Trap/ Body Shower/ faucet/ Hand Shower/ Flexible Tube etc complete all as specified and as directed.

Supply and fixing Bib taps, CP, with wall flange screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed. Make : Jaquar (Cat No. VGP-81037) (VIGNETTE Prime) or equivalent from Cera (Valentina Single Lever Series) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and as directed. Make : Jaquar (Cat No. VGP-81083K & ALD 083) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Pillar Cock With Lift Type Operating Knob & Base Flange, complete with fittings, 450mm long braided hoses with connection complete all as specified and as directed. Make : Jaquar Cat No. FLR-5015 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Angular Stop Cock with wall flange, CP, screwed down, screwed for 15mm bore brass ferrule or for union and fixed in position complete all as specified and as directed. Make : Jaquar Cat No. VGP-81053 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing central hole basin mixer with regular spout without Popup Waste System, chromium plated, for mixing hot & cold water, complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed. Make : Jaquar Cat No. FLR-5167NB or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing central hole basin mixer valve with regular spout, 15mm bore, brass chromium plated, for mixing hot & cold water, complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed. Make : Jaquar Cat No. CQT-CHR-23167B or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated, screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-charge. Make : Jaquar Cat No. VGP-81165 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, screwed down for iron pipe suitable for fixing to wall, complete all as specified and as directed. Make : Jaquar (Cat No. ORP-10117PM) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower), screwed down, complete all as specified and as directed. Make : Jaquar (Cat No. FLR-CHR-5281N) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Overhead Shower 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange complete in all respect all as specified. Make : Jaquar (Shower-OHS-1989, Shower Arm-SHA-479L450) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing in replacement Hand Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System including wall hanging bracket/stand, complete all as specified and as directed. Make : Jaquar (Cat No. HSH-1717) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply & fixing Flexible Tube 8mm dia. & 1.5M Long with Nuts complete all as specified and as directed. Make : Jaquar Cat No. SHA-549D8 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and as directed. Make : Jaquar Cat No. ALD-769L250x190 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing PVC connection 15 mm size of length 600 mm with PTMT nuts of approved quality complete all as specified and as directed.

Supply and fixing in replacement ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed.

Supply and fixing in replacement Ball brass valves, high pressure, with high density plastic ball (polythene float) fly nut with rod, screwed suitable for 20mm bore iron pipe complete all specified and as directed.

Supply & fixing in replacement waste coupling 32mm size full thread, CP, complete all as specified and as directed. Make : Jaquar Cat No. ALD-705 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply & fixing in replacement PVC waste pipe (spring type/coil shaped) not less than 700mm long suitable for 32mm size waste coupling of sinks, basins, etc. complete all as specified and as directed.

Supply and fixing in replacement Toilet Roll Holder complete all as specified and as directed. Make - Jaguar Cat Part No ACN-1151N or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing in replacement sheet glass corner assembly of 300X300mm/250x250mm for corners consisting of 5.5mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and as directed. Cat part No ACN-1173 of Jaquar or Techno commercial equivalent in make mentioned in Appx 'B'

Supply and fixing in replacement glass shelf 550mm long with CP fancy type bracket /railing complete all as specified and as directed. Cat part No AQN-CHR-7771 of Jaquar or Techno commercial equivalent in make mentioned in Appx 'B'

Supply and fixing in replacement soap dish, stainless steel of suitable size to accommodate soap, tooth brush and tooth paste complete all as specified and as directed.

Supply and fixing in replacement PVC Bathroom mirror cabinet of appx size 450mm X 350mm X 140mm / 450mm X 380mm X 140mm (Compact Mirror Cabinet, Concealed shelves) approved quality complete all as specified and as directed. Make Prayag cat part No 557 or Techno commercial equivalent in make mentioned in Appendix 'B'/Approved by GE

Supply & fixing single towel rail 600mm long stainless steel, including taking out any type towel rail/ring complete all as specified and as directed. Make : Jaquar Cat No. ACN-1111SM or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply & fixing in replacement vitreous china Oval Shape Table Top Basin Size (mm) 465 x 475 x 185, Ceramic Wash Basin, white, including 32mm chromium plated waste coupling and PVC waste pipe including fixing material for wash basin on granite slab and including making hole in granite slab for coupling, and taking down existing WHB of any description/size complete all as specified and as directed. Make : Jaquar (JDS-WHT-25903) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply & fixing in replacement vitreous china wash basin, white, flat back, of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe (flexible) 600mm long including cast iron brackets (embedded in wall upto 110 mm depth, cutting and making good the walls with PCC and cement mortar) and cutting for and pinning in end of bracket or erecting with long screwed shanks & fly-nuts, sealing gap between wall and basin with silicone sealant, complete all as specified and as directed.

Supply & fixing in replacement vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel jet spray with PVC pipe suitable length as per site requirement with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement Rimless Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x665x750 mm, S Trap- 220 mm, including taking out old any type ordinary WC complete all as specified and as directed. Make : Jaquar Cat No. CNS-WHT-853S220SPPSM or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic soft close seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges, SS jet spray with 01 mtr long PVC pipe with CP connector etc as recommended by manufacturer for fixing, packing and taking down existing WC of any description/size complete in all respect all as specified. Make : Jaquar (Continental Series-CNS-WHT-963N or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing in replacement health faucet (Hand Shower), CP including 1-1.2 meter long 8mm dia flexible tube in chrome finish and including wall hook and fixing material, complete all as specified and as directed. Make : Jaquar Cat No. ALD-573 or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply and fixing in replacement thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating suitable for any type of existing EWC complete all as specified and as directed.

Supply and fixing in replacement stainless steel jet spray with PVC pipe suitable length as per site requirement with CP connector and necessary nut bolts suitable for any type of existing EWC complete all as specified and as directed.

Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern as per IS 7231: 1994, white colour with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and as directed.

Supply and fixing concealed flushing cistern of PVC 8 ltr. cap with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size surface mounted complete in all respect all as specified. Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent in make mentioned in Appendix 'B'

Supply & fixing in replacement vitreous china urinal, half stall type, white, as approved by GE, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling, 32mm dia waste pipe and water spreader, pointing around urinal back in cement mortar, including taking down old urinal with fittings complete all as specified and as directed.

Taking down any type of soil waste, vent pipe (CI any size or pattern) including all fittings, heads, shoes, bends, branch piece, Y connection, cowl etc fixed along wall/floor complete all as specified and as directed.

Taking down any type of drain/rain water pipes (PVC SWR any size or pattern) including all fittings, heads, shoes, bends, branch piece, Y connection, cowl etc fixed along wall/floor complete all as specified and as directed.

Supply & fixing 110mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls keeping 100mm away from wall, joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees of any radious/junction (double T/Y, socket) equal or unequal (fittings with or without access door as per requirements and as directed), reducer any type, vent cowls etc., complete all as specified and as directed. Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done.

Supply & fixing 75mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls keeping 100mm away from wall, joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees of any radious/junction (double T/socket) equal or unequal (fittings with or without access door as per requirements and as directed), reducer any type, vent cowls etc., complete all as specified and as directed. Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done.

Supply & fixing 50mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls keeping 100mm away from wall or fixed as a spout/over flow pipe of tank, joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees, vent cowls etc., complete all as specified and as directed. Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done.

Supply & fixing Bracket, Stack clamp, nut bolt, fastner, slotted channel etc suitable for uPVC pipe of any dia 110/75/50mm and for CPVC pipe of dia 20/25/40mm, all made out of Galvanised iron material with hot dip zinc aluminium flake coated, size and shape of bracket and clamp as directed so that pipe keeping 100mm away from wall complete all as specified and as directed. Note :- The weight of Bracket, Stack clamp, nut bolt, fastner, slotted channel etc shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after the actual weight at site.

Supply & fixing in replacement stainless steel Grating 100-125 mm dia with or without waste hole complete all as specified and as directed.

Supply & fixing in replacement uPVC floor trap 110mm bore long neck with stainless steel grating including jointing with pipe joint lubricant, including PCC work complete all as specified and as directed.

Supply & fixing in replacement uPVC floor trap 75mm bore long neck with stainless steel grating including jointing with pipe joint lubricant, including PCC work complete all as specified and as directed.

Supply & fixing in replacement PVC (SWR) gully trap 125 X 110 mm, type b, setting and jointing with solvent cement complete all as specified and as directed.

Taking down cement plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Material and labour for plastering 15mm thick with ready mix cement plaster material on external surface of Brick walls/chajja/fins or concrete surfaces, finished even and fair complete all as specified and as directed.

Material and labour for plastering 12mm thick with ready mix cement plaster material on internal surface of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed.

Material and labour for plastering 5mm thick with ready mix cement plaster material on concrete surfaces of ceiling, finished fair and even complete all as specified and as directed.

Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description, stacking serviceable brick for re use if directed and balance removing rubbish from the site complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with Fly Ash bricks (old size ), straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work using old serviceable bricks obtained from dismantled item shall be reused after cleaning old cement mortar, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for 35mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers and jallies (measured solid) including all moulding frame (Pre cast frame) and set in cement mortar (1:4) including necessary form work complete all as specified and as directed.

Material and labour for PCC (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in coping, side of roof sheet, roof kerb or mud stops, rounded or chamfered on edges, for hold fast & similar work etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for reinforced cement concrete M-20 (nominal mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels, cills, steps; seismic and other similar bands complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for mild steel TMT bars, grade Fe 500D/550D, 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Form work to flat sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs, sides of chajjas, fascias, fins etc and similar works rough finished flat surfaces complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and removing from site complete all as specified and as directed by Engineer-in- charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and removing from site complete all as specified and as directed

Supply and fixing pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated (profile) steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category C3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering, end rib designed as capillary barrier (capillary grove) fixed with self drilling screws of corrosion resistance class 3 as per AS 3566 Part-II and of suitable size and type as per AS 3566 Part-I as per manufacturer's instructions and EPDM washers including end and side lap, necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in- charge

Dismantling of Gl frame work (snap grid framed work) any type and removing from site complete all as specified and as directed

S&F Gl frame work (snap grid framed work) for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete including hangers 6 mm dia. GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at any height and position complete all as specified and as directed.

S&F 6mm thick non asbestos fibre cement designer building boards, suitable for roof ceiling snap grid framed work, fixed or laid/ inserted to GI framework with screws complete all as specified and as directed.

Dismantling steel work of any description like cooler stand, grills, grating, walk ways, railings, frame work of water tanks, framed work of motor pump, doors, gates, Staging / steel frame work for Solar water tanks and similar work etc but excluding framed truss etc. complete all as specified and as directed.

Material and labour for mild steel Framed work such as grills, guard bars, ladder, cooler stand, as door frame, railing, cloth drying provision, gratings, framed work for roof sheeting, structural steel work, frame work of water tanks, Staging / steel frame work for Solar water tanks, frame for fixing view cutter sheet and similar work etc. with ends of bars shouldered and/or riveted, or forged into spikes, made by using rolled mild steel Joist, channel, angle, or tee sections, fixed independently distance pieces, cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, and cut to shape, drilled and counter sunk for screw, conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

Material and labour for mild steel tubular poles/post, framed work, framed/truss work, Staging / steel frame work for Solar water tanks, frame for fixing view cutter sheet etc made by using hollow square/rectangular/round pipe, Grade St-240, ERW or induction butt welded tubes conforming to conforming to the latest relevant Indian Standards (IS), such as IS 1239 (Part 1) or IS 4923 for structural use, including fabrication, assembly, installation, and finishing, including special shaped washers, bending and welding etc, complete all as specified and as directed.

Supply and fixing Fibre Reinforced Plastic (FRP) sheet green clour 2.5 to 3mm thick, Smooth/Matte finish , having high mechanical strength and tensile strength, excellent fire and heat resistance, any size as per site requirement, fixed with and including suitable size rivets or MS nut bolt in any position such as view cutter, wall cladding, decorative fencing etc;, complete all as specified and as directed. Note :- Iron Frame Structure shall be measured and paid separately under appropriate item of BOQ

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossy finish with using paint brush complete as specified and as directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment of any type/description (any layer) from external/internal wall/ceiling surfaces, soffits/chajja/roof projection surfaces etc., by scraping steel patti or Mechanical sander/grinder machine having suction vaccum Bag (Smart periodical methodology), complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces, surface after complete removal, applying acrylic putty on internal surfaces of walls/ceiling/soffits etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade putty, including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving interior painting complete all as specified and as directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. Make of acrylic Putty: - Berger / JK / Birla / Asian / Nerolac

Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 12 sq.m/litre/2 coats to wall surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed. Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ. Brand and Make of interior acrylic emulsion paint: - Easy Clean Matt of Berger / Apcolite Advanced of Asian / Impression Ultra Fresh of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac

Material and labour for applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (new or old prepared external surface after complete removal) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed. Note ;- Complete removal shall be measured and paid separately under respective item of BOQ. Brand and Make of exterior acrylic emulsion paint: - Weather Anti Dust of Berger / Apex Ultima of Asian / Excel Mica Marble of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac

Material and labour for applying 02 coats of interior acrylic emulsion paint of white shade (Company Depot Tinted) @ 7.50 sq.m/litre/2 coats to ceiling surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 10.50 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed. Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ. Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac

Material and labour for Preparation of existing treated surfaces by remove / scraping down all loose treatment etc with using broom / paint brush / sand papering or by any other mean including applying wall putty where required for filling to nail holes/light hair cracks etc., after preparing the surface applying 01 coat of exterior acrylic emulsion paint of approved tint/shade as per existing (Company Depot Tinted) @ 11.50 sq.m/litre/per coat to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. over and including a coat of exterior primer @ 15 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed. Brand and Make of exterior acrylic emulsion paint: - Weather Coat Glow of Berger / Apex Weatherproof of Asian / Excel of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac

Material and labour for preparation of old previously treated surfaces of concrete / kerb stone /Brick / Asbestos sheet of any description not otherwise described over 10cm width or girth, by cleaning the dust and removing all loose particle with using clean cloths, brooms and dry paint brush etc and after preparing the surfaces applying one coat of synthetic enamel paint (1st quality) of approved tint/colour (one colour or alternative any colour black/white/yellow etc) complete as specified and as directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre 300mm apart including drilling depth of holes not less than 300mm and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion @ one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

Taking down carefully existing point wiring any type (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etc complete all as specified and as directed.

Material and labour for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 25 mm nominal size, with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 60mm deep, suitable length and 1.6-1.63mm thick sheet) including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. (ii) Where ever it is not feasible to cable drawn through existing PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing capping or pipe shall be provided on surface of RCC including fixing arrangement without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.

All as per above Srl item No. 205 but for one socket out let 5/6 Amps point controlled by one switch (on same board) complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Material and labour for concealed Point wiring for one socket out let 5/6 Amps point controlled by one switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size, with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 60mm deep, suitable length and 1.6-1.63mm thick sheet) including inner and outer plates, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size, with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular bell switch (Min 60mm deep, suitable length and 1.6-1.63mm thick sheet) including inner and outer plates, cover plate white colour, single or double module suitable for fixing the modular bell switch, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Bell switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch/AC starter switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size, with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 60mm deep, suitable length and 1.6-1.63mm thick sheet) including inner and outer plates, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket, AC starter switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size, with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal boxes suitable for modular switch (Min 60mm deep and 1.6-1.63mm thick sheet, suitable size ) including inner and outer plates, cover plate white colour, single module suitable for fixing the modular two way switch, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular two way switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Taking down carefully existing point wiring any type (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder but except concealed conduit/junction and sunken boxes etc complete all as specified and as directed.

Material and labour for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through existing concealed conduit, including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including making good disturbed surface by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

All as per above Srl item No. 212 but for one socket out let 5/6 Amps point controlled by one switch (on same board) complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Material and labour for concealed Point wiring for one socket out let 5/6 Amps point controlled by one switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through existing concealed conduit, including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including making good disturbed surface by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through existing concealed conduit, including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including making good disturbed surface by using CM (1:3) complete all as specified and as directed. Note :-(i) Bell switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch/AC starter switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through existing concealed conduit, including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including making good disturbed surface by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. Note :- (i) Modular switch, socket, AC starter switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through existing concealed conduit, including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including making good disturbed surface by using CM (1:3) complete all as specified and as directed. Note :- (i) Modular two way switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Supply only modular switch 6Amps, single pole, one way (1 module) complete all as specified and as directed.

Supply only modular switch 6Amps, single pole, two way complete all as specified and as directed.

Supply only modular switch 16Amps, single pole, one way (1 module) complete all as specified and as directed.

Supply only modular Bell Push switch, 6Amps, single pole, one way (1 module) complete all as specified and as directed.

Supply only modular Socket outlet multipurpose type 3 pin, 6 Amp, flush type (2 module) complete all as specified and as directed.

Supply only modular Socket outlet multipurpose type 3 pin, 16 Amp, flush type (2 module) complete all as specified and as directed.

Supply and fixing modular stepped type (1-4/5), electronic Fan regulator, 100-120 watt, 250 volts, (2 module) suitable for other than BLDC fan complete all as specified and as directed.

Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, topline series, 240 volts, 5/6 Amp, complete all as specified and as directed.

Supply and fixing electronic calling Bell musical type (multi music), AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge.

Supply and fixing lamp holder (ISI marked) polycarbonate cased body (B22 base), top line series, with back plate, 6Amps, fixing on surface of metal/wall or any other situation along with cover the holder backside with bakelite plastic laminated sheet (Electrical-grade, like Hylam, or as phenolic laminate sheet) complete all as specified and as directed.

Supply and fixing LED lamp, minimum 3 star rated 9/10W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications (a) Lumen system efficacy of lamp should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) CRI : Morethan 80

Taking down carefully existing surface type Flame proof Point wiring any type (light/fan point) complete with all accessories including rusted/broken conduit, junction boxes etc complete all as specified and as directed.

Material and labour for surface type Flame proof Point wiring (using red, black and green colour wires as colour coding for single phase circuits) complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) for main point and for continues as earth wire connected to earth dolly etc. (Phase, netural and earth wire) drawn through and including flame proof rigid stove enamelled black ERW conduit suitable nominal size as required at site dia but not less than 25 mm nominal size, with all flame proof fittings and accessories i.e. flame proof joint, pipe bend, union, reducer, nipple, pipe hook, Screws, GI saddles, clamps, connectors etc, for light/fan points including making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) One light point circuit of 03 lights controled by one MCB (ii) FLP junction box, Flexible conduit, inspection elbow and MCB shall be measured and paid separately under appropriate item of BOQ).

Material and labour for surface type Flame proof Point wiring (using red, black and green colour wires as colour coding for single phase circuits) complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) for main point and for continues as earth wire connected to earth dolly etc. (Phase, netural and earth wire) drawn through and including flame proof rigid stove enamelled black ERW conduit suitable nominal size as required at site dia but not less than 25 mm nominal size, with all flame proof fittings and accessories i.e. flame proof joint, pipe bend, union, reducer, nipple, pipe hook, Screws, GI saddles, clamps, connectors etc, for light/fan points including making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) One light point circuit of 04 lights controled by one MCB (ii) FLP junction box, Flexible conduit, inspection elbow and MCB shall be measured and paid separately under appropriate item of BOQ).

Supply and fixing Flameproof junction box LM6 protection, 3 way including FLP plug as required and accessories suitable for ERW pipe as per existing size in wiring complete all as specified and as directed

Supply and fixing Flameproof junction box LM6 protection, 4 way including FLP plug as required and accessories suitable for ERW pipe as per existing size in wiring complete all as specified and as directed

Supply and fixing Flameproof flexible metalic hose conduit pipe of size 25mm x 300mm long, heavy duty complete all as specified and as directed.

Supply and fixing Flameproof inspection elbow protection suitable for ERW pipe as per existing size in wiring complete all as specified and as directed

Supply and fixing in replacement CMRI certified flameproof/weather proof 2 X 16/20 Watt LED tube light wall/surface mounted, well glass luminaire, recommeded for Gas/Vapour group of IAA & IBB and zone 1&2, IP65 Protection, Epoxy finish LM6 die cast aluminium housing with heat resistant toughened glass, including inbuilt electronic driver, 2 kv surge protection, internally pre-wired, LED lamp, connector block etc complete with all other accessories and including making electric connection with 2 x 2.5 Sqmm Single Core FRLSH copper conductor Cable covered with ERW flexible steel conduit (heavy duty) and making good disturbed surface of walls/ceiling etc by using CM (1:3) including taking down old any type light fitting Complete all as specified and as directed.

Supply and fixing in replacement CMRI certified flameproof 40 Watt LED bulk head luminaire recommended for Gas/Vapour group of IIA & IIB and zone 1 & 2, die cast aluminium housing with heat resistant toughened glass/dome glass, external reflector, pre coated electronic type luminaire with inbuilt electronic driver, internally pre-wired, complete with all other accessories and including making electric connection connecting with twin core twisted flexible copper conductor cable and connector block, tobe fixed flush to wall surface complete all as specified and as directed.

Supply and fixing in replacement flame proof rotary type Switch with termination box in LM6, 16A, single pole 250V complete all as specified and as directed.

Supply and fixing in replacement CMRI certified flame proof DB die cast aluminium alloy (LM-6) Gas group of IIA, IIB and IIC, SPN 8 way, 240 Volts, operated externally spring type knob complete with cable entry to suitable incomming/out going cable with cable glands suitable for hazardous area and confirming to IS-2147/62, neoprene gasket, pre-wired, DB tobe fixed flush to wall surface, including flame proof MCB as under complete all as specified and as directed. (a) MCB single pole & neutral 32 Amps, 10 KA rupturing capacity, curve 'B' - 01 No (Incoming) (b) MCB single pole 6 Amps, 10 KA, curve 'B'- 06 Nos (Outgoing)

Supply and fixing in replacement CMRI certified flame proof DB die cast aluminium alloy (LM-6) Gas group of IIA, IIB and IIC, SPN 6 way, 240 Volts, operated externally spring type knob complete with cable entry to suitable incomming/out going cable with cable glands suitable for hazardous area and confirming to IS-2147/62, neoprene gasket, pre-wired, DB tobe fixed flush to wall surface, including flame proof MCB as under complete all as specified and as directed. (a) MCB single pole & neutral 32 Amps, 10 KA rupturing capacity, curve 'B' - 01 No (Incoming) (b) MCB single pole 6 Amps, 10 KA, curve 'B'- 06 Nos (Outgoing)

Supply and fixing in replacement (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating 200 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, and provision for mounting Isolator/MCB/MCCB as incomer and for outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed..

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) TPN, 4 Way, 415V AC supply, As per IEC 61439-3, and provision for mounting Isolator/MCB/MCCB as incomer and for outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed. Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 12 Way, 240V AC supply, As per IEC 61439-3, and provision for mounting Isolator/MCB/MCCB as incomer and for outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed. Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way, 240V AC supply, As per IEC 61439-3, and provision for mounting Isolator/MCB/MCCB as incomer and for outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed. Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, shall be of IP-54 protection class, complete with one single pole MCB of capacity 20/25 Amps, 240 volts, AC supply including taking down unserviceable old any type complete all as specified and as directed.

Supply and fixing MCB ‘C’ curve suitable for 415 volts AC supply, 100 Amps, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed.

Supply and fixing MCB ‘C’ curve suitable for 240 volts AC supply, 40 to 63 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed.

Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed.

Supply and fixing MCCB 100 Amps, Four pole, adjustable thermal magnetic protection, 16 KA, 415 V, Icu=Icu (100%), AC supply, fixing in DB/panel complete all as specified and as directed.

Supply and fixing MCCB 63 Amps, Four pole, adjustable thermal magnetic protection, 16 KA, 415 V, Icu=Icu (100%), AC supply, fixing in DB/panel complete all as specified and as directed.

Taking down existing LED tubelight, bed side lamp, ceiling light, panel light, bulk head light etc of any size complete all as specified and as directed.

Taking down existing LED out door security/street light fitting, Flood light, Bollard light, Post Top light etc including its fittings like GI bracket, clamps, MS pipe any size complete all as specified and as directed.

Supply and fixing LED tube light fitting polycarbonate housing 1 x 18/20/22 Watt, appx 4 feet long, housing environment friendly, including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing LED light fitting 1 x 8/10 Watt, appx 2 feet long LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap. (h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CCT : Minimum 6000K (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing LED fitting 1 x 10/12 Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing, environment friendly, (wall mounted/surface mounted Bulkhead fitting/ Cylindrical fitting / Doom profile etc) including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories complete all as specified and as directed.

Supply and fixing decorative wall light fixture made of stainless steel suitable for and including 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22),and suitable holder 3000/6500K, not less than 90 lumen/watt , wall mounted bracket including making connection complete all as specified and directed.

Supply and fixing recessed type LED sensor based ceiling light fitting with wide light window for maximised glare free output, suitable for ceiling cutout 595x595mm modular grid/POP ceiling finishes complete fitting with driver and high brightness LED 34/35/36 Watt flat panel of size 600x600mm, including electric connection with using suitable flexible copper conductor cable from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed:- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP20. (g) CCT : 6500K (h) CRI : Morethan 80 (j) CRCA pre coated housing. (k) LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection minimum 3 kV. (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing surface mounted type LED sensor based ceiling light fitting with wide light window for maximised glare free output, complete fitting with driver and high brightness LED 34/35/36 Watt flat panel of size 600x600mm, including electric connection with using suitable flexible copper conductor cable from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed:- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP20. (g) CCT : 6500K (h) CRI : Morethan 80 (j) CRCA pre coated housing. (k) LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection minimum 3 kV. (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing energy efficient LED sensor based security light fitting of 45 W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5 Sqmm, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to bracket, MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing energy efficient LED wide angle flood light fittings of 200 W capacity with driver, Epoxy powder coated pressure die cast aluminium alloy housing and front cover clear toughned glass, including electric connection with suitable copper cable and including fixing arrangement with suitable nut bolts or any hanging hook etc, complete fitting and all accessories with following specifications and all as directed:- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : More than 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing 9 watt cylindrical shape, integral decorative LED Bollard light with Opal acrylic, and IP-65 protection, PC diffusor, module and inbuilt driver, round shaped of 0.6m pole complete fitting with all accessories and LEDs, including fixing arrangement with material as directed by Engineer-in-charge including making electric connections, complete all as specified and as directed and as per the following specifications:- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CCT : 3000 K. (g) IP rating : IP65. (h) Built in LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 4.5 kV (l) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing LED Post Top light fitting of 25W decorative design, Glare-free and better uniformity compete fitting all with accessories and LED lamp, fixing on and including 50mm dia GI pipe light grade of length 2.5 mtr embeded in PCC block of size 0.3x0.3x0.5m made with PCC (1:2:4) type B-2 using 20 mm graded crushed stone aggregate, including making electric connection with suitable size of wire, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficiency of luminaire should be minimum 120 lumen per watt. (b) Input voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10*C to plus 50*C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) CRI : More than 70 and CCT : 5700K (g) IP rating : IP 65 (h) IK rating : minimum IK 07 (j) Built in potted LED Driver of the make as of the luminaire. (k) LED driver should e complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection 10kV (inbuilt +extended) (m) Lens - High Efficiency wide angle lens. (n) BIS approved fixtures and driver (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Taking down carefully existing sub main wiring any run any size including rusted/broken concealed conduit, junction boxes etc and making good disturbed surface of walls/floors etc complete all as specified and as directed.

Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 6 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed. Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 10 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed. Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

Taking down carefully existing sub main wiring any run any size from conduit, except taking out conduite, junction boxes etc complete all as specified and as directed.

Material and labour sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 6 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through existing PVC conduit, on independent circuit from panel/DB complete all as specified and as directed. Note :-Three run of copper wire shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

Material and labour for Earthing complete with galvanised Galvanized steel pipe electrode, 40mm nominal bore, medium grade, 10 metres length buried directly and preferably vertically in ground with top edge not less than 1.25 metres below normal ground level, connected with earthing lead of 4mm dia galvanized earth wire by means of GI bolts/nuts/washers and protected by 15mm bore GI light grade pipe from earth pipe electrode to test point upto 7.5mtr including all as shown in electrical plate No. 2 of SSR 2009 (Part-I). Earth GI pipe shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, including taking out/dismantling old unserviceable earthing system any type complete all as specified and as directed. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto 7.5 mtr from top of earth electrode shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Disconnecting electric connection and taking down carefully ceiling fan, exhaust fan, Geyser complete with accessories and deposited to E/M store yard complete all as specified and as directed.

Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 250/300mm sweep with blades and including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in opening in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed. Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 450mm sweep with blades and including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in opening in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed. Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

Supply and fixing BLDC ventilating air axial flow Fan of size 250mm sweep, made of sturdy Engineering plastic, single phase, 18-20W, minimum 1300RPM, copper winding, complete with louvers shutter, including electric connection with and including new suitable flexible copper conductor cable from ceiling rose to fan, complete all as specified and as directed. Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.

Material and labour for Cutting openings, through brick walls built in cement mortar at ground/first/second floor for exhaust fan any sweep including making good with cement mortar (1:4) complete all as specified and directed.

Supply and fixing in replacement dry type capacitor 2.5 mfd suitable for any type and any make fan complete all as specified and as directed.

Supply and fixing in replacement dry type capacitor 4 mfd suitable for any type and any make fan complete all as specified and as directed.

Supply and fixing in replacement modular stepped type (1-4/5), electronic Fan regulator, 100-120 watt, 250 volts, (2 module) suitable for other than BLDC fan of any sweep complete all as specified and as directed.

Supply and fixing in replacement non modular stepped type (1-4/5), electronic Fan regulator, 100-120 watt, 250 volts, (1 module) suitable for other than BLDC fan of any sweep complete all as specified and as directed.

Supplying and fixing in replacement 6.0Sqmm twin core cable flat or circular, PVC insulated aluminium conductor cable heavy duty ,1100 Volts grade , ISI Marked , served with inner sheathing of PVC tape and overall PVC sheathed as per IS 1554 (Part-I) 1988 with latest amendments, as in service connections suspended by insulating hangers not more than 1.00 metre apart including 4mm dia suspension wire, complete all as specified and as directed.

Supply and fixing in replacement switch 6Amps, single pole, one way (1 module), in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing in replacement switch 6Amps, single pole, two way, in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing in replacement switch 16Amps, single pole, one way (1 or 2 module), in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing in replacement Bell Push switch, 6Amps, single pole, one way (1 module), in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing in replacement Socket outlet multipurpose type, 6 Amp, flush type (2 module), in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing in replacement Socket outlet multipurpose type, 16 Amp, flush type (2 module), in existing switch board as per existing make and shape (any type like ordinary/modular/semi modular ) including making electric connection and testing, fixing at any site complete all as specified and as directed.

Supply and fixing on surface of wall medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of 20 mm nominal size, with all fittings and all accessories i.e. pipe bend, tee, elbow, pipe hook/clips/clip clamps, couplers, saddles etc., including making good disturbed surfaces of walls by using CM (1:3) complete all as specified and as directed.

Supply and fixing casing capping of size as per site requirement but not less than 20 mm with necessary fitting complete all as specified and directed.

Material and labour for 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked), (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) drawn through PVC pipe or through casing capping complete all as specified and as directed.

Supply and fixing 4 Way (4Module) modular surface Gang Box made out of high grade PVC/ABS material, suitable for modular switches and socket complete all as specified and as directed.

Supply and fixing 6 Way (6Module) modular surface Gang Box made out of high grade PVC/ABS material, suitable for modular switches and socket complete all as specified and as directed.

Supply and fixing 8 Way (8Module) modular surface Gang Box made out of high grade PVC/ABS material, suitable for modular switches and socket complete all as specified and as directed.

Supply and fixing in replacement of pressure relief valve CP brass confirming to relevant IS with washer suitable for 25/50 ltrs geysers complete all as specified and as directed.

Supply and fixing in replacement of brass non return valves, screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for union, ISI marked, complete all as specified and as directed.

Supply and fixing in replacement pre painted Bottom inspection cover in two pieces made out of 22SWG MS sheet suitable for 25/35/50 ltrs capacity geysers of any make, including provision of space for indicating lamp of any type (as per existing geyser) complete all as specified and as directed.

Supply and fixing in replacement water connection flexible pipe, inner core is typically heavy-duty PVC, reinforced with high-tenacity synthetic yarn, and an outer braiding of stainless steel (often SS 304 grade) of size 450mm long, 15mm bore with SS nuts and PVC/rubber sealing washers complete all as specified and as directed.

Supply and fixing in replacement water connection flexible pipe, inner core is typically heavy-duty PVC, reinforced with high-tenacity synthetic yarn, and an outer braiding of stainless steel (often SS 304 grade) of size 600mm long, 15mm bore with SS nuts and PVC/rubber sealing washers complete all as specified and as directed.

Supply and fixing in replacement of thermostat auto cut type with temperature control regulator and with relay of any type suitable for existing model of geyser 25L/50L complete all as specified and as directed.

Supply and fixing in replacement of 1500 Watt heating element (ISI-Marked) Triangle type or any other type as per existing geyser of any make and capacity including rubber ring clamping screws etc, complete all as specified and as directed.

Supply and fixing in replacement of 2000 Watt heating element (ISI-Marked) Triangle type or any other type as per existing geyser of any make and capacity including rubber ring clamping screws etc, complete all as specified and as directed.

Supply and fixing in replacement of 3 core 2.5 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V, as per IS: 694 complete all as specified and directed.

Supply and fixing in replacement of top plug 15/16 Amp, 3 pin complete all as specified and as directed.

Supply and fixing in replacement of metal clad plug top 2 pin & earth, including 3 pin socket( metal clad) complete set ISI marked 20 Amp 250V complete all as specified and as directed.

Supply and fixing/ grouting, 100mm long (min) mild steel fastener / fastener L-hook with washer for hanging the geyser and making good the disturbed surface with cement mortar (1:4) complete all as specified and as directed.

Material and labour for Disconnecting, dismantling of solar water heating system of any capacity /make incl all water and electric connection and re-fixing the same in existing position after the following repairs and testing complete all as specified and as directed :- (a) Replacement of the worn out/missing nuts bolts, washers, unions, sockets flanges and screw, nipple, tee, elbow, plug etc complete. (b) Descaling/de- sludging the hot water pipes and normal water by using appropriate chemicals/Anti corrosive/Anti scaling agent solution, cleaning and washing all copper tube & water circulated pipes of heat convertor sets thoroughly cleaning the complete solar panel of making the tube scale free and reassembling the panel. (c) Cleaning hot and cold water tanks, removing sludge and scale from the tank manually using suitable chemicals complete. (d) Repair of collector fins incl required welding works etc complete. (e) Testing on completion after Repair work and making the Solar Water Heater functional in each aspects. Note:- The Spare parts such as Solar energy collector panel, toughened glass, rubber gasket, hose pipe, insulation for hot water pipe, heating element, thermostat, Water Storage tank, gate valve/float valve, MS Clamp shall be measured & paid separately under respective items.

Supply and fixing in replacement of Rubber gaskets made out of fine rubber for Solar pannel complete to make system air tight dust and water leak proof complete all as specified and as directed.

Supply and fixing in replacement of hose pipe 1" (25 mm) inner dia for hot/cold water for solar system of suitable length as existing size including 02 Nos clamps of required size complete all as directed.

Supply and fixing in replacement thermostat for solar hot water system operating on 240V AC complete all as specified and as directed.

Supply and fixing in replacement Heating element 3 KW, 240 volts AC supply (ISI marked ) suitable for solar water heaters (any type, as per existing) complete with rubber gasket including replacing the rusted bolts/screw if required during changing the heating elements, complete all as specified and as directed by Engineer-in-Charge. Make: Victor/ Power pack/ sunflame/ Intersolar

Supply and installation in replacement of complete solar energy ( Master/ evacuated tube type, same as per existing or superior compatible with existing system) collector panel made out of aluminum body with toughened glass complete with copper tube including with all accessories of capacity 100 LPD complete all as specified and as directed. Make ; Solchrome/ Inter solar system pvt ltd. /TATA BP

Material and labour for insulation in repair of hot water pipe of size 20mm bore alongwith all fittings, insulated with rock wool / glass wool, chicken wire mesh and aluminium sheet cladding 25 gauge complete all as specified and as directed.

Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block & similar work etc including form work complete all as specified and as directed.

Supply and fixing in replacement of solar panel toughened glass having thickness 5 mm all as per existing model of solar panel system complete all as specified and as directed.

Supply and fixing in replacement of hot water tank 200 ltr capacity tank, non-magnetic, should be 1.60 mm thickness low carbon steel with porcelain coating, 04 Cr 18 NI: Approximately 0.04% Carbon, 18% Chromium, and 8-10% Nickel or 07 Cr 18 NI: Approximately 0.07% Carbon, 18% Chromium, and 8-10% Nickel, AISI/ASTM Grade 304 stainless steel, IS 1570 (Part-3)-1985 refer to the up-to-date standards available from the Bureau of Indian Standards, TIG Welded, duly insulation in PUF 50mm, with provision of inlet/outlet complete all as specified and as directed.

Supply and fixing in replacement of hot water tank 300 ltr capacity tank, non-magnetic, should be 1.60 mm thickness low carbon steel with porcelain coating, 04 Cr 18 NI: Approximately 0.04% Carbon, 18% Chromium, and 8-10% Nickel or 07 Cr 18 NI: Approximately 0.07% Carbon, 18% Chromium, and 8-10% Nickel, AISI/ASTM Grade 304 stainless steel, IS 1570 (Part-3)-1985 refer to the up-to-date standards available from the Bureau of Indian Standards, TIG Welded, duly insulation in PUF 50mm, with provision of inlet/outlet complete all as specified and as directed.

Supply and fixing in replacement of hot water tank 500 ltr capacity tank, non-magnetic, should be 1.60 mm thickness low carbon steel with porcelain coating, 04 Cr 18 NI: Approximately 0.04% Carbon, 18% Chromium, and 8-10% Nickel or 07 Cr 18 NI: Approximately 0.07% Carbon, 18% Chromium, and 8-10% Nickel, AISI/ASTM Grade 304 stainless steel, IS 1570 (Part-3)-1985 refer to the up-to-date standards available from the Bureau of Indian Standards, TIG Welded, duly insulation in PUF 50mm, with provision of inlet/outlet complete all as specified and as directed.

Net CONTRACT SUM will be worked out in General Summary after deduction of ‘CREDIT SCHEDULE’ amount inserted by MES.

Please Enable Macros to View BoQ information