Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC Satisfied |
| 2 | L2₹3.3 L+₹10,593.40 (3.32%)Rejected-AOC | ₹3.3 L+₹10,593.40 (3.32%) | L2 | Rejected-AOC Satisfied |
| Sl No | Description | Qty | Unit | AKHIL INFRAAS L2 | KAARDEEP ENGINEERING L1 |
|---|---|---|---|---|---|
| 1.00 | Earthwork excavation in all types of soils including all initial lead and lift etc complete. | 4.8 | m3 | 185 ₹888 | 181 ₹868.8 Lowest |
| 2.00 | Cement concrete 1:4:8 (one cement, foure sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specification. | 0.7 | M3 | 5,590 ₹3,913 Lowest | 5,590 ₹3,913 Lowest |
| 3.00 | Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications. | 3 | M3 | 9,400 ₹28,200 | 9,373 ₹28,119 Lowest |
| 4.00 | Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts. | 2 | qtl | 9,500 ₹19,000 | 9,320 ₹18,640 Lowest |
| 5.00 | Supply and erecting shuttering including necessary supports for plane surfaces such as Plinth BEam etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. l.No.122 | 6 | m2 | 1,000 ₹6,000 | 978 ₹5,868 Lowest |
| 6.00 | Supply and erecting shuttering including necessary supports for plane surfaces such as RCC R.C.C Column and slabs using M.S.Sheet sides and soffits including all cost and conveyance etccomplete | 8.9 | m2 | 1,400 ₹12,460 | 1,304 ₹11,605.6 Lowest |
| 7.00 | BRICK WORK in cement mortar 1:5 using best quality of second class chamber bricks including all cost etc., complete | 4 | m3 | 7,000 ₹28,000 | 6,840 ₹27,360 Lowest |
| 8.00 | Supply and fixing of MS Grill for Windows and Ventilator etc including all neccessary supports and locking arrangements etc complete | 150 | Kg | 150 ₹22,500 | 120 ₹18,000 Lowest |
| 9.00 | Painting the Wall Two Coats with approved colour Emulsion paint over One Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers. | 23 | m2 | 270 ₹6,210 | 268 ₹6,164 Lowest |
| 10.00 | Painting with Two Coats of approved colour Enamal paint over One Coat of primer over the New iron doors and gates surfaces etc., complete complying with standard specifications and as directed by the departmental officers. | 7 | m2 | 160 ₹1,120 | 156 ₹1,092 Lowest |
Tender Value
₹4 L
EMD Value
₹4,000
Closing Date
4 Mar 2026, 3:00 pmClosed
The commissoner, coimbatore
Coimbatore Corporation, Main Office, Big bazaar street, Town hall, Coimbatore-1
Construction of Reading room for library at muthukumar in ward no 47, Central zone, Coimbatore corporation
2026_MAWS_668998_6
e30/2026
Open Tender
Civil Works
Works
90 days
Coimbatore corporation6
As per tender documents
5 documents required · 5 mandatory
₹0
₹4,000
20 Apr 2026
2 Mar 2026
5 Mar 2026
2 Mar 2026
4 Mar 2026
2 Mar 2026
Earthwork excavation in all types of soils including all initial lead and lift etc complete.
Cement concrete 1:4:8 (one cement, foure sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specification.
Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications.
Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.
Supply and erecting shuttering including necessary supports for plane surfaces such as Plinth BEam etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. l.No.122
Supply and erecting shuttering including necessary supports for plane surfaces such as RCC R.C.C Column and slabs using M.S.Sheet sides and soffits including all cost and conveyance etccomplete
BRICK WORK in cement mortar 1:5 using best quality of second class chamber bricks including all cost etc., complete
Supply and fixing of MS Grill for Windows and Ventilator etc including all neccessary supports and locking arrangements etc complete
Painting the Wall Two Coats with approved colour Emulsion paint over One Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers.
Painting with Two Coats of approved colour Enamal paint over One Coat of primer over the New iron doors and gates surfaces etc., complete complying with standard specifications and as directed by the departmental officers.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD.24)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit
supply and run of 2 of 6 sq.mm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 110V on 7/20G bearer wire for service connection mains
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour
Supply and fixing of 4'20 watts LED Tube Light Fittings complete with copper choke and condensor with TW round blocks on wall or ceiling with LED tube with PVC unsheathed copper leads from terminals to the fitting including all cost etc complete.
Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed single core unsheathed copper Conductorcable of 1100V grade in suitableheavy gauge MS conduit pipeon wall and celling with M.S accessories inflush with wall with 150mm x 100mm x 75mm MS swithbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuos earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point(SD 38)
Wiring with 2x4 sqmm (56/3.0) PVC insulated SC unsheathed cu. Conductor cable of 1100V grade in suitable heavy gauge MS conduit piped on wall and celling with M.S accessories inflush with wall with 150mm x 100mm x 75mm MS switch boxconcealed type with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuos earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point(SD 40)
Supply and fixing of 1200mm (48")sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (SD 110)
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 11W CFL (SD83)
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements withnecessary masonry work and with 38mm RCC cover slab for the brick masonry (SD233)
Supply of Water Supply Pipes,Fittings,Electrical fittings pulb etc complete.
25 mm UPVC Pipe
20 mm UPVC Pipe
50 mm UPVC Pipe
25 x 20 mm UPVC Bush
25 mm UPVC Elbow
25 mm UPVC Tee
25 mm UPVC Ball Valve
25 mm UPVC 45' Eblow
25 mm UPVC Coupling
25 mm UPVC FTA
25 mm UPVC Union
20 mm Upvc Elbow
20 mm Upvc Coupling
50 mm UPVC Tee
50 mm UPVC Ball Valve
25 x 15 mm UPVC Brass Elbow
20 x 15 mm UPVC Elbow
20 x 15 mm UPVC Tee
50 mm PVC Pipe
75 mm PVC Pipe
90 mm PVC Pipe
50 mm PVC Elbow
50 mm PVC Shoe
75 mm PVC Elbow
75 mm PVC Coupling
75 mm PVC Door Elbow
90x75 mm PVC Bush
90 mm PVC Elbow
90 mm PVC Tee
90 mm PVC Bend
90 mm Gratings
110 mm PVC Pipe
110 mm PVC Elbow
110 mm PVC Tee
110 mm PVC Bend
110 mm PVC Shoe
110 mm PVC Vent Cowl
110 mm PVC Door Tee
15 mm Stop cock
UPVC Adhesive
PVC Adhesive
Supplying of 1000 litre HDPE Tank of approved quality including all cost etc.complete.,
Supplying and Fixing of Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter
Supply and fixing in position of European water closet with 'S' (or) 'P' trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete complying
Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin size 550mm x 400mm with a pair of cast iron brackets including cost of 15mm Φ brass chromium plated pillar tap, 32mm Φ C.P. waste, 32mm Φ PVC waste pipe with rubber plugs and chain, 15mm Φ G.M. Wheel valve 15mm Φ brass nipple, 15mm Φ Nylon connections etc. Including fixing the wash hand basin in the wall in position with a pair of C.I. Brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete as per standard specifications.
Conveyance of earth from site to 15 km far away to permitted low level area as directed by the department officiers
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.complete
Flooring with Ellis pattern using 6mm chips (No sand to be used) including for the mixing, laying and labour charges etc., complete as per standard labour charges etc., complete as per standard specification .
Filling with Pallam Sand Layer by Layer including for the laying,watering , Consolidation and labour charges etc.,complete as per standard specification .
Plastering the cement mortar 1:5 (one cement and Five sand) to 12 mm thick using fine river sand including necessary hogging, scaffolding, hacking, curing & labour charges etc., complete.
stage.html
html • 0.04 MB
techsummary_803896.pdf
finsummary_803896.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
ITB.pdf
Additional Documents • 0.19 MB
TenderDocumentSingle.pdf
Tender Documents • 0.92 MB
BOQ_803896.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .