Construction of Park and Community Hall in Jai Narayan Vyas Colony Jaisalmer

Amount

JAISALMER STYLE NOKH BARI

JASALMER STYLE CHATRI ( at top)

JAISALMER STYLE BARADARI

Tripale twisterdimentions:- 1980mm (length) x 1980mm (width) x 2080mm (height), safe play area:- 2.5 mtr. X 2.5 mtr. Triple twister equipment is a made of ms pipe of different nd for nominal bore size i.e. internal diameter of pipe in mm. The central main pipe is ø 115mm x 5mm thick ms pipe. The bottom of centra pipe is welded with support of ms round plate ø225mm & 8mm thick. The bottom of frame is made from 90mm x 3 mm thik ms pipe each bottom frame are connected to central pipe with two hlf curved shaped ms flate (100mm x 203mm). The handle frame is of 35od x3mm thick made frome ms pipe in capsul shape there is hole of 25mm on base plate for the adjustment the level of the equpement pins used for dia. 25mm are made from she 8620 bright material there are two type of bearing used papered bearing and ball bearing ( 6306 zz permanent sealed bearing) or reputed brand the whole console of pins is designed in lock and key and the spacial “ti” spring lock pattern is used so that the bearing and the plate console cannot be taken out there will be spacial spring lock between the beating block for safety high tensile steel with glavalized nuts and botls are used for assembly. The spacillize powder coating of texture colour used. The foundation used for fixing the central pole made from the combination of 3 rod and the ø225mm and & 8mm thick ms plate the rod is 760mm long and 3/4inch thick and at the one end of the rod bsw threading is done for the adjustment of the level of the main frame these there rods are welded together with35mm x 35mm ms angle of the 5mm thickness. The top ends of the structure are closed and properly welded. The twister plate are made from ø350mm x 6mm thick chakkar plate the border cover of plate is 50mm x 6mm thick ms plate and the base of the twister plate is welded with spacial pic console (ø90mm and 15mm thickness) and with the plate for support. The bottom of the bottom frame is welded with support is t shaped ”c” channel heavy gauge (76mm x 38mm).

Parallel bar dips dimentions:- 1700mm (length) x 685mm (width) x 1930mm (height), safe play area:- 2 mtr. X 1 mtr. Parallel bar dips equipment is a made of ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The central main frame is made up of combination of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20 x 12 ) of 16 gauge for support and display. Bottom frame is made up of (90mm x 3mm) thick ms pipe 1876 mm long and 279mm height. The linkage handle for the parallel bar dips are made upto 50mm ms pipe of heavy gauge both the side handle are kept at different levelso that every one can use it at one end handle should be at 1041mm height from the base frame and other at 914mm height from the base frame. High tensile steel with glavanized nuts and bolts are used for assembly. The specialized power coating of texture coloue is used. The foundation used for fixing the one side of bottom frame is made form the combination of 6 rod and the 2 thick plate (228.6 mm and 8mm ) and the rod is 760mm long and ¾” thick and at the one end of the rod bsw threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mm x 35mm ms angle of 5mm thickness and the adjustment is done by the nuts sam to be done on other side. All the ends of the structure are closed and properly welded.

Dimentions:- 1778mm (length) x 685mm (width) x 2280mm (height), safe play area:- 3 mtr. X 1.25 mtr. Seated puller equipment is a made of ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The central main frame in made up of combination of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20” x 12” ) of 16 gauge for support and display. The bottom of frame is made from 90mm x 3 mm thik ms pipe. All linkages handle frame and seat frame are made up of ø50mm pipe of heavy gauge.the seat frame is tread up of (100mm x 50mm) ms pipe. In l and trapezium shape for support. To build structue bushes are used which are made from ms seamless pipe of 63mm o.d and 10mm thickness. The bearing used are ball bearing 6205 permanent lubricated sealed bearing of reputed brand. The main frame and the linkage are fixied on the 10mm thick plate the bearing shafft of 25mm dia. Is fixed on the capsule hole on the ends and covered with 70mm and 10mm thick plate this covered is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with glavnized bolts sam on each every linkage joint. Seat and back rest provided are made up of cr ms sheet the sheet is supported by the heavy gauge channel the sheet has uniform border with on joints. High tensile steel with glavnized nuts and bolts are used for assembly. The specialized powder coating of texture colour is used. . The foundation used for fixing the one side of bottom frame is made form the combination of 6 rod and the 2 thick plate (228.6 mm and 8mm ) and the rod is 760mm long and ¾” thick and at the one end of the rod bsw threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mm x 35mm ms angle of 5mm thickness and the adjustment is done by the nuts same to be done on other side. The cerclips used for assembly are a 24mm. All the ends of structure are closed and properly welded. One end of seat frame is fixed with high tensile rubber.

Abdominal boarddimentions:- 1930mm (length) x 1778mm (width) x 1498mm (height), safe play area:- 2.5 mtr. X 2 mtr. Parallel bar dips equipment is a made of ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The central main frame in made up of combination of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20” x 12” ) of 16 gauge for support and display.the frame of sit up board is heavying boundry of 25.4mm ms pipe and capsule ms pipe (63mm x 25.4mm) placed horizontally thought out the frame the sit up board is supported by (100mm x 50mm) ms pipe. The remaining frame of sit up board is made up to combination of ms pipe ( 90mm x 3mm thick ) as pillars set up certain degree and (100mm x 50mm) ms pipe for supporting the frame and the sit up board frame the leg support is made up to (ø90mm x 533mm ) ms pipe long are joint together by capsule pipe (65mm) ends of the leg support should be covered with abs covering. The bottom of central frame is supported by ms round plate of ø228.6mm and 8mm thick. The foundation used for fixing the one side of bottom frame is made form the combination of 6 rod and the 2 thick plate (228.6 mm and 8mm ) and the rod is 760mm long and ¾” thick and at the one end of the rod bsw threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mm x 35mm ms angle of 5mm thickness and the adjustment is done by the nuts and the supported frame poles is fixed by four t shaed “c” channel heavy gauge(76mm x 38mm). There are holes of 25mm on base plate for the adjusment of the level the equpment. High tensile steel with glavnized nuts and bolts are used for assembly. The specialized powder coating of texture coloue is used. All the ends of the structure are closed and properly welded.

Leg press Dimentions:- 2220mm (length) x 685mm (width) x 2311mm (height), safe area:- 3.15 mtr. X 1.5 mtr. Leg press equipment is a made from ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The main frame is of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20 x 12 ) of 16 gauge for support and display. The bottom of central frame is welded a pair of support of ms round plate of 225mm and 8mm thick for maintaning the posture the rubber handle is plased on the on the main sleeve frame on 25.4 nb the sleeve frame is made up of 63.5 nb this sleeve can be disassembied from main frame the sleeve is supported by 63.5mm from top and 50.87nb from mid. There are hole of 25mm on base plate for the adjustment of level of the equpment. Foot rest in made up to of combination of chakkar plate & flate (30.48mm) is welded on border the foot rest (150mm x 350mm) is fixed on the ms frame of ( 100mm x50mm) the ms frame is made little tapered. The bearing used are ball bearing 6205 permanent lubricated sealed bearing of reputed brand. The pins used are made up of 25mm sae 8620 bring material. To build structue bushes are used which are made from ms seamless pipe of 80mm o.d and 10mm thickness seat and back rest provided are made up of cr ms sheet the sheet is supported by the heavy gauge channel the sheet has uniform border with on joints. High tensile steel with glavnized nuts and bolts are used for assembly. The specialized powder coating of texture colour is used. The foundation used for fixing the main frame made from the combination of 12 rod and the ø228.6mm and & 8mm thick ms plate the rod is 760mm long and 3/4inch thick and at the one end of the rod bsw threading is done for the adjustment of the level of the main frame these 12 rods are welded together with 35mm x 35mm ms angle of the 5mm thickness and the adjustment is done by the nuts.the main frame and the sleeve are fixied on the 10mm thick plate the bearing shafft of 25mm dia. Is fixed on the capsule hole on the ends and covered with 70mm and 10mm thick plate this covered is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with glavnized bolts. All the ends of the structure are closed and properly welded.

Air walkerdimentions:- 2501mm (length) x 76mm (width) x 2095mm (height), safe area:- 2.5 mtr. X 1.9 mtr. Air equipment is a made from ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The main frame is of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20 x 12 ) of 16 gauge for support and display. The pillars of main frame are made up of dia 90mm x 3mm thick ms pipe. To build structure bushes and used which are made from ms seamless pipe of 63mm od and 10mm thickness. The sleeve frame is made up of 63.5 nb this sleeve can be disassembied from main frame the sleeve is supported by 63.5mm ms pipe from the top and at the other end foot rest is attached with two flat (25.4mm x 63mm).the ms pipe of dia 50mm is bended in “c” from to attach the main frame and pillars.the foot rest (152mm x 368mm)is fixed on the sieeve frame foot rest is made up of combination of chakkar plate and flat (30.48mm)is welded on border. The main frame and pillars are attached with supported pillars dia 50mm ms pipe for safety and supporting reasons.the foundation used for fixing the main fram and the pillers is made from the combination of 12 rod and the 4 thick plate (dia. 228.6mm and 8mm) the rod is 760mm long and ¾” thick and at the one end of the rod bsw threading is done for adjustment of the level of the main frame these 12 rods are welded together with support 35mm by 35mm ms algle of 5mm thikness and adjustment is done by the nuts and the supporting pilars.the foundation used for fixing the supporting pillars is fixed by four t shaped c channel heavy gauge (76mm x 38mm) and all the t shaped c channels are joind together with supports 35mm x 35mm ms angle of 5mm thickness. To build structure busses are used which are made from ms shamless pipe of 63mm od and 10mm thickness. The bearing used are ball bearing 62.05 zz. Parmanent lubricated sealed bearing of reputed brand. High tensile steel with glavinized nuts and bolts are used for assembl. The cerclips used for assembly are a 24mm. The specilized powder coatin of texture colour is used. All the ends of structure are closed and properly welded.

Cross walker dimentions:- 1930mm (length) x 990mm (width) x 1778mm (height), safe area:- 2.5 mtr. X 1.5 mtr. The cross walker equipment is a made from ms pipe of different nb. Nb stand for nominal bore size i.e. internal diameter of pipe in mm. The main frame is of (ø90mm x 3mm thick and 100mm x 50mm ms pipe) and cr sheet (20 x 12 ) of 16 gauge for support and display. The pillars of main frame are made up of dia 90mm x 3mm thick ms pipe. And 100mm x 50mm ms pipe both the main frame and supporting frame are joined together thought 100mm x 50mm ms pipe. The handle frame is made up to ø50mm ms pipe and 35mm ms pipe. To b uild structure bushes are used which are made from ms seamless pipe of 63 od and 10mm thickness the linkage frame consist of portion each portion is made up of combination ms pipe (50mm square ) and ms plate (50mm x 5mm thick) on both the side and the footrest (152mm into 368mm) is fixed on the both the end of each portion. Footrest is made up combination of chakkar plate and flate (30.48mm) is welded on the border. The linkage frame and the handle are fixed on the 571mm x 6mm thick plate the bearing shaft of 25mm dia is fixed on the capsule hole on the ends of thick plate and covered with 70mm and 10mm thick plate this cover is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts same on each every linkage joint. The foundation used for fixing the frame and the pillar is made from the combination of 12 rod and the for thick plate (ø228.6 mm and 8mm ) the rod is 760mm long and ¾” thick end at the one end of rod bsw threading is done for the adjustment of the level of the main frame these 12 rod are welded together with support 35mm and 35mm ms angle of 5mm thickness and the adjustment is done by the nuts and th esupporting pillars the foundation used for fixingthe supporting pillars is fixed by four t shaped “c” channel heavy gauge 76mm x 38mm and all the t shaped c channel joined together with support 35mm x 35mm ms angle of 5mm thickness. . To build structure busses are used which are made from ms shamless pipe of 63mm od and 10mm thickness. The bearing used are ball bearing 62.05 zz. Parmanent lubricated sealed bearing of reputed brand. High tensile steel with glavinized nuts and bolts are used for assembl. The cerclips used for assembly are a 24mm. The specilized powder coatin of texture colour is used. All the ends of structure are closed and properly welded.

Providing and installation of Arihant playtime, Uday creation Kilkari or its equivalent make Arch Swing Two Seater with following Specification:- Safe play Area-4 Mtr. X 2.5mtr. Height 2.4 Mtr. Its total required area 3mtr.X1.5mtr. And height shall be 2.4mtr. from ground level top bar of swing is made by 60mm IDGI pipe 12 gauge. and 4 nos. of leg support pipe should be 60 mm IDGI pipe 12 gauge. top bar attach with 2nos. of alloy steel coasting bearing with GI chain. Seating arrangement of swing are made up of 10mm thick. Anti skid chequered reinforced rubber belt. Bearing should be covered by specially design nylon clamp, the pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. and install by C.C. base system of size 30X30X45cm as per direction of Engineer in charge. the complete work should be done as per entire satisfaction and direction of Engineer in charge.

Providing and installation of Arihant playtime, Uday creation Kilkari or its equivalent make Double Roller Slide with following Specification:- Safe Play Area -GO45mmX2775mm Height -1487 mm with over all covering area 5054mmx1784mm and safe play area 6045mmX2775mm with platform height 1487mm Slide chute made up of LLDP rollers and fixed on 50X50X5mm. angle railing made up of 50x5mm flat and 25mm Dia IDGI pipe. Chute supported by 75mm dia IDGI pipe The platform mein frame is made up of 40X40X5mm angle having braking of 25X25X5 ms angle and 25x ms flat platform covered with aluminium chequered plate of 15 SWG platform is supported by 50mm dia. Ladder main frame is made up to 25mm Dia IDGI pipe. Triangular steps should be made up of rounded edges for safety. Contractor should provide Owen backed powder coating at components like ladder, handrail, platform, leg support etc. The supporting pipe should be grouted in proper foundation base C.C. 30X30X45 cm as per direction of Engineer in charge. the complete work should be done as per entire satisfaction and direction of Engineer in charge.

Providing and installation of Arihant playtime, Uday creation Kilkari of its equivalent make FANTASY THRILLER Multi Play system with following specification:- play sae area 6mtr.X4mtr. Providing and fixing of Fantasy Thriller suitable for children age group of 10-15 years Play area 4.8mtrX3mtr Slide length shall be made 8 fibre reinforced plastic 5mm Thickness, Platform height 1.2 mtr shall be made up 48mm IDGI pipe Bridge Length shall be up to 1.2 mtr, railing and climber made up of 32mm IDGI and 25mm IDGI pipe. All the sharp edges and corners should be properly grinded to give smooth finishing to avoid injury of children while playing on it. The pure polyester powder coating (oven baked) should be done on the pipes to extend the life of equipment. The supporting pipe should be grouted in proper foundation base C.C. 30X30X45 cm as per direction of Engineer in charge. The complete work should be done as per entire satisfaction and direction of Engineer in charge

Providing and installation of Arihant playtime, Uday creation kilkari of its equivalent make of m-Climber with following specification:- Width:- 2.4 mtr Height:- 1.8 mtr. Providing and fixing of 'm' climbers with main frame of 40mm IDGI pipe with rungs of 25mm IDGI pipe. The ground height is 1.8 mtr. and width is 1.2 mtr. This climb has a capacity of 6 to 8 children and painted by oven backed powder coating on all components . All the sharp edges and corners should be properly reminded to give smooth finishing to avoid injury of children while playing on it. The pure polyester powder coating ( oven baked) should be done on the pipes to extend the life of equipments. The supporting pipe should be grouted in proper foundation base C.C. 30X30X45 cm as per direction of Engineer in charge. The complete work should be done as per entire satisfaction and direction of Engineer in charge. Age group 6-12 year.

Providing and installation of Arihant playtime, Uday creation Kilkari of its equivalent make of Biden Climber with following specification:- It required area 3.65X3.5 mtr and made by 32mm NE MS Class pipe in main frame joint with vertical support 50mm NB MS Pipe all equipments joint with proper nut bolting system. Height should be 1.8m. And outer frame should be 15 mm NB GI pipe. painted by over backed powder Coating on all components. All the sharp edges and corners should be properly grinded to give smooth finishing to avoid injury of children while playing on it. The pure polyester powder coating (oven baked) should be done on the pipes to extend the life of equipments. The supporting pipe should be grouted in proper foundation base C.C 30X30X45 cm as per direction of Engineer in charge. The complete work should be done as per entire satisfaction and direction of Engineer in charge. Age group 6-12 year.

Providing and installation of Arihant playtime Uday creation Kilkari or its equivalent make of Horse Rider with following specification:- Providing and fixing of Horse Spring Rider Its required area 1.0 mtrX0.8mtr. Total height 0.5mtr from ground level. Leg support should be made by 25 mm IDGI Pipe and Handle made by 15mm NB Pipe. Seat should be made by FRP animal Duck/ Horse shape with 5mm thick connected with heavy duty spring. The supporting pipe should be grouted in proper foundation base C.C. 30X30X45 cm as per direction of Engineer in charge. The complete work should be done as per entire satisfaction and direction of Engineer in charge.

Providing and installation of Aricant playtime, Uday creation Kilkari or its equivalent make Ok Duck Spring Rider with following specification:- Providing and Fixing of Duck Spring Rider Its required area 1.0 mtr X 0.8 mtr. Total height 0.5 mtr form ground level. leg support should be made by 25mm IDGI pipe and handle made by 15mm NB pipe. Seat should be made by FRP animal Duck/ Horse shape with 5mm thick connected with heavy duty spring. The supporting pipe should be grouted in proper foundation base C.C. 30X30X45 cm as per direction of Engineer in charge. The complete work should be done as per entire satisfaction and direction of Engineer in charge..

Providing and installation of Arihant playtime, Uday creation Kilkari or its equivalent make Rotary thrill with following Safe Play Area-2.5mtr. Dia. Height-1.0mtr. Its total required area 1.5 Dia. Mtr. Outer frame should be made by 32 mm IDGI Pipe and handrail and leg support be made by 20 mm IDGI pipe. Centre pipe should be made by 48mm IDGI pipe. Connected with heavy duty ball bearing 6312 reputed make only. Seating arrangement should be made by Fibre Glass Reinforced Plastic with 5mm thickness. All the sharp edges and corners should be properly grinded to give smooth finishing to avoid injury of children while playing on it. the pure polyester powder coating (oven baked) should be done on the pipes to extend the life of equipments. The supporting pipe should be grouted in proper foundation base C.C. 30x30x45 cm as per direction of Engineer in charge. The complete work should be done as lper entire satisfaction and direction of Engineer in charge. Age group 3-8 Year.

Bidder Name

Amount

M/s Anand Construction Company(GSTN-08AKXPR2848G1ZE)

J.D. Construction Company, Jaisalmer(GSTN-NA)

Satya Construction(GSTN-NA)

M/s Anand Construction Company

Satya Construction

M/s Anand Construction Company

Satya Construction