Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹45.3 L+₹2.3 L (5.35%)Rejected-AOC | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹47.0 L+₹4.0 L (9.37%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹91,200
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur
GE/U(N)-60/2023-24 PROVN OF FLY PROOFING FOR BLDG NO NP-26, NP-27 AND NP-38 AT AFVH AND ADDL/ALTN OF BLDG NO NP-51 OR COOK HOUSE AND DINNING HALL AT ENGR REGT UNDER GE (NORTH) UDHAMPUR
2023_MES_629148_2
GE/U(N)-60/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer Tender documents
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹91,200
Yes
7 Feb 2024
21 Dec 2023
13 Jan 2024
21 Dec 2023
11 Jan 2024
28 Dec 2023
Amount
Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
Non skid coloured glazed ceramic tiles area of each tile exc 0.11 sqm but n exc 0.18 sqm 7mm to 8mm thick as in floor finishes set and joined in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM(1:4) incl skirting complete all as specified and as directed by Engr-in-Charge.
M&L for vitrified ceramic tiles 08 to 10mm thick (Square/rectangular) polished double charged, area of each tiles not exceeding 0.36 sqm as in floor etc, set and joined in neat cement slurry and pointed in coloured cement to match including vending layers of CM 1:4 (20mm thick) with skirting, complete all as specified and directed by Engr-in-Charge.
S &F Glazed ceramic (coloured) on vertical surfaces 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick screed bed complete all as specified and as directed by Engr-in-Charge.
M &L for providing 25mm thick cement concrete 1:2:4 type B-2 using 20mm graded crushed stone aggregates as in flooring finishing even and smooth with using extra cement complete all as specified.
Taking down cement plaster of any description on bricks, PCC block or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 10mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and as directed.
M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in laid in panel not executing 2 mtrs and joints filled with bitumen compound plinth protection even and smooth with using extra cement complete all as specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) n. exc 1..5 Sqn each complete all as specified and as directed.
All as per item above but exceeding 1.5sqm and n.exc 4sqm each complete all as specified and as directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete of frame size 125x60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete of frame size 105x60mm, complete all as specified and as directed.
M&L for factory made, 2nd class hard wood rail and stile 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel inserts of 12mm BWP commercial ply . The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F Aluminium handle 50mm long oval type complete all as specified and as directed.
M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/ hold fast complete all as specified and as directed.
S&F aluminium anodised bolts barrel tower bolts with bright both 150mm long.
S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5sqm in each pane complete all as specified and as directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt 300mm length with hasp, stable (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed as per specified.
M&L for preparation of new wooden surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over pre-primed surfaces complete all as specified and as directed.
Demolition of brick work to stone boulder masonry built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.
M&L for brick work with sub class 'b' bricks straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.
M&L for half brick work with sub class 'b' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified and as directed.
Prep of new decorated cement plastered surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty of make Birla/JK preparing surfaces with sand paper including one priming coat complete all as directed.
M&L two coat of cement base paint over newly plastered surfaces of wall including preparing surfaces complete all as specified and as directed.
M&L two coat of cement base paint over old plastered surfaces of wall including preparing surfaces /filling of damaged part nails pots with compound complete all as specified and as directed.
S&F in repair rotational moulded polythene water storage tanks (cylindrical vertical three layered white colour with closed top) hoisted and fixed in position all as specified in SSR Part-I, capacity of water tank 1000 ltr including dismantling of existing water tank and removed from site complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal from site 15mm/ 20mm complete.
S&F steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixing with self tapping screws complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Dismantling of asbestos cement corrugated, semi corrugated sheets in roof covering complete all as specified and as directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm complete all as specified in SSR.
M&L 15 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, Pillers, window-clips, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of
PCC 1:4:8 type D-2 (40mm graded stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and as directed.
Machine cut kota stone slab slooring 18-20mm thick as in flooring, steps etc over 15m thick cement screed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl skirting complete all as specified and as directed.
All as per Srl item No. 39 above but in riser of steps skirting, dado, pillers but on 10mm thick cement screed 1:4
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge.
Formwork to edges of concrete flats, treads, breaks in floors, window clips, concrete railings, openings in concrete wall, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engr-in-Charge.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.
Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm thick plastering with water proofing compound as directed laid/ made to slope as in RCC roof surfaces complete all as directed.
Dismantling boarding including frame etc any description fixed in any position fixed with screws or nails all as specified & directed by Engr-in-Charge.
Demolition of mud roof any thickness including plastering and leaping complete all as per specified and directed by Engr-in-Charge and removal of debris outside MOD land complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal from site as directed.
PCC 1:4:8 type D-2 AS in floors 75mm thick as in sub base complete all as per specified and directed by Engr-in-Charge.
M&L machine pressed interlocking paver blocks glossy finish any shape and size conforming to I IS 15658-2006 OF 60mm thickness, M-35 grade with grey cement and pigment over & including 50mm thick sand cushion all as specified..
Two coats of aluminium paint on roof padding surfaces complete all as specified and as directed by Engr-in-Charge
Priming the roof surface with bituminous primer @ 0.3 litrs/ Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and there after supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermos fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm all as specified and as directed. Work shall be carried out only by manufacturer itself or through company’s authorised agent who shall render the guarantee for 10 Years on Rs 100 affidavit. (Note no payment shall be made to contractor with out producing documentary evidence).
S&F false ceiling non asbestos fibre Cement board ceiling 4mm, thick in 600x600mm panel (Make-Everest) designed ceiling conforming to IS-14862 type B in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitable spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross 'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc with galvanised Butterfly level clips, spaced at 1200 mmc/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint and having a load bearing capacity of 12Kg /Sqm, and re-fixed all existing electric wiring and fixture all complete at all heights as per direction of Engr-in-Charge.
Supply and fixing factory made steel windows (Box type) two leaves one with glazing and other with out glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome Primer, fixed as in repairs, complete all as specified & shown in drawings and as directed by Engr-in-Charge.
Excavation over areas, n exc 1.5m deep and getting out hard rock/ floor (After approval by GE)
Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.5m for the starting point complete all as specified.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified.
M & L precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in anchorage blocks for hold fast in walling, set in cement mortar 1:4 with plain fair faces including chamfers weathering etc complete all as specified.
S&F Stainless Steel mosquito grade 304 Proof wire cloth of stainless 0.36 mm dia and 1.4mm aperture fixed with stainless steel wire staples and screw complete all as per specified and directed by engr-in charge.
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with necessary screws and three roller in each door complete, including one coat of red oxide primer all as specified.
Mild steel Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways;railings;mild steel plain sheet , framework of water tanks and similar work conforming to Fe-290-Gde-E-165 complete all as per specified and directed by engr-in charge.
Preparing of newly plastered or unplastered surfaces of wall and applying two coats of white wash complete all as per specified and directed by Engr-in-Charge.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made slidings bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 or Gde E-165
M&L for Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter
M&L for Formwork to face of walls, retaining walls, abutments, parapets & staircase railing & similar work including attached pilasters, buttresses, etc.; vertical or to batter
Reinforced cement concrete (Design mix) M-25 in Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns; etc; basement slabs; under-reamed piles and mass concrete
Reinforced cement concrete (Design mix) M-25 in Walls, retaining walls, basement walls ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses
Demolition of Concrete in ground floors & paving n exc 15 cm thickness (below or above ground level) complete all as per specified and directed by Engr-in-Charge.
M&L 100mm thick machine pressed interlocking paver blocks of any shape and size with M-50 design Mix concrete of any approved colour using grey cement and pigment conforming to IS 15658-2006.
M&L for Sand cushioning bed (filling under floors) incl spreading levelling watering if required complete all as per specified and directed by Engr-in-Charge.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles without using extra cement complete all as specified.
M&L rendering 15mm thick on fair faces of brick/concrete surfaces in cement mortar 1:4, with water proofing compound (WPC shall be measured separately) complete all as per specified and directed by Engr-in-Charge.
M & L two coat of cement base paint including preparation of newly plastered surfaces of wall complete all as per specified and directed by Engr-in-Charge.
S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A).
Taking down carefully point wiring copper / aluminium(light , fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regulators sockets etc to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as per specified and directed by Engr-in-Charge.
M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point/ bell point controlled by one way switch,, and wire to be drawn in and including concealed conduit of dia not less than 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws , cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm.
M&L for point wiring with 1.5 Sq. mm PVC insulated unsheathed FRLS multistranded copper conductor , medium grade ISI marked drawn into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drawn in to and including surface PVC rigid non metallic conduit for one ceiling fan point controlled by one switch with and also including 1.5sqmm continuous earth wire connected to common earth dolly complete all as per specified and directed by Engr-in-Charge.
All as per item No 79 above but for one 3/5 pin socket 5 Amp on same board with cable 1.5sqmm size.
All as per item No 79 above but for one 3/5 pin socket 5 Amp on independent board with cable 1.5sqmm size..
All as per item No 79 above but for 3 pin socket outlet 15 Amps independent with 2.5 sqmm incl continues earthing with multistandard copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as per specified and directed by Engr-in-Charge.
S&F Switch Piano flush type single pole 6 Amps One way, complete all as per specified and directed by Engr-in-Charge.
S&F socket flush type single pole 6 Amps one way, complete all as per specified and directed by Engr-in-Charge.
S&F Switch Socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as per specified and directed by Engr-in-Charge.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc, as reqd complete all as per specified and directed by Engr-in-Charge.
S&F Ceiling rose, 3 terminal, PVC/ Polycarbonate, isolated body complete all as per specified and directed by Engr-in-Charge.
S&F Slim linear LED lighting fixture 20 watt LED battern, with full base of extruded aluminium section acting as a heat sink with closed back, isolated dirver, complete making all connection unsing 1.5 sqmm copper conductor multistandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit complete all as per specified and directed by Engr-in-Charge.
S&F in replacement E-Lite LED Curve lighting fixture for mirror 10/12 watt LED batten,2' long with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site reuse to measured separately or disposal by credit complete all as per specified and directed by Engr-in-Charge.
S & F LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed.
Supply and fixing LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection compete
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make : Crompton, Havells, Philips.
M&L for repair of ceiling fan/exhaust fan 1200/300mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting. If as per site requirement fan will be found burnt rewinding will be provide by the contractor as per unit quoted rate all as specified and directed.
Supply and fixing Exhaust fans steel body, AC ingle phase 230 volts of size 450 mm sweep with blades and frame and louver complete all as per specified and directed by Engr-in-Charge. Make : Crompton, Havells, Usha.
M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as per specified and directed by Engr-in-Charge.
M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement including taking down old submain wiring as directed by EIC, all accessories complete all as per specified and directed by Engr-in-Charge.
M&L for sub main wiring with 2 single core PVC insulated FRLS unsheathed stander copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stander copper conductor cable 4.0 sqmm as continuous earth wire and connected to.
S&F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50Hz supply double door SP&N DB system 12 ways.
S&F 'C' series SPN MCB 40 to 63 Amps 240V, 50Hz, 10KA lighting and other domestic loads incl all terminals, fitting etc.
Taking down ceiling fan/exhaust fan, sealing cable end etc and shifting to store complete and rehanging the same after overhauling and painting with white synthetic enamel paint
S&F 'C' series SP MCB 06 TO 32 MPS 240v, 50hZ, 10kA suitable for lighting and other domestic loads incl all terminals, fitting etc
S&F LED light fitting PLUTO NEO PANEL 2' X 2' PLR 36 watt LED 857S environmental friendly, new generation, aestheticaly designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong/ grid/ ceiling all as specified and directed
S&F DPX3 thermal magnetic MCCB 3 ple 100 Amps 415 Volts 16 KA including making necessary fitting arrangement complete all as per specified and directed by Engr-in-Charge for MCCB DB. Make Legrand, Cat Part No : 4200 05 or equivalent to Shnieder.
Supply and fix VTPN MCCB Double door Distribution Board 04 way 415 volts grade IP 43 Protection Grade with provision for (MCCB) as incoming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs complete all as per specified and directed by Engr-in-Charge. Make : C&S Cat No:CSDBMCCB100DD04IP43S/ Standard Cat No: DSDLVDRBAOFO04/ Indo Asian Cat No : 811888
S & F in repair Thermal magnetic MCCB 4 pole 63 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT complete all as per specified and directed by Engr-in-Charge for MCCB DB. Make C&S Cat No: CSC2N4/ Indo Asian Cat No: 830022/ or equivalent makes to Standard
M&L Earthing complete with galvanised steel earth plate electrode 60x60 cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (e) Requisite quantity of common salt and charcoal. (f) Testing of Earthing.
Supply and lay XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3 .1/2 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing all as specified and directed..
Excavation in trenched in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as directed.
Returning filling in including spreading levelling watering and well ramming 25cm in thickness in any type of soil complete all as per specified and directed by Engr-in-Charge.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all specified and directed.
Supply and lay brick class 'B' covering as mechanical protection to cable with well burnt all as specified and directed
M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia all as specified and directed.
Supply and fix electric water heater, storage type steel body with stainless steel glass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. Make : Havells, Crompton, V Guard.
takashdeep traders
M/S SUSHEEL KUMAR Govt. CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .