Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Lowest quoted amount overall reasonable | |
| 2 | L2₹22.3 L+₹94,493.10 (4.43%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest hence rejected | |
| 3 | L3₹22.6 L+₹1.3 L (6.15%)Rejected-AOC | L3 | Rejected-AOC 3rd lowest hence rejected | |
| 4 | L4₹23.9 L+₹2.6 L (12.0%)Rejected-AOC | L4 | Rejected-AOC 4th lowest hence rejected | |
| 5 | L5₹25.1 L+₹3.7 L (17.5%)Rejected-AOC | L5 | Rejected-AOC 5th lowest hence rejected |
Tender Value
₹27.9 L
EMD Value
₹56,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Garrison Engineer Belgaum
Garrison Engineer Belgaum, Laxmi Tek, Camp, Belgaum
SPECIAL REPAIRS TO EXTERNAL PLASTER AND EXTERNAL WEATHER PROOF AT DAD RESIDENTIAL COMPLEX, BELGAUM AND PROVN OF STAIR CASE FIRE EXIT, ALUMINIUM DOOR AND COLLAPSIBLE GATE AT THE OFFICE OF PAO ORs, MLI,BELGAUM UNDER GE BELGAUM.
2022_MES_551968_1
8868/E8
Open Tender
Civil Works
Item Rate
180 days
Belgaum
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Belgaum
₹56,000
Yes
21 Oct 2022
14 Sept 2022
15 Oct 2022
14 Sept 2022
13 Oct 2022
28 Sept 2022
Amount
Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc including removal of debris off the premises complete all as specified and as directed.
Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thick below or above ground level in any mortar including removal of rubbish off the premises completeall as specified and as directed.
Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound . Note ;Impermo/Roff/Cico
Material and labour for Rendering 10mm thick in CM 1:6 on brick surface , finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished surface even and smooth without using extra cement including necessary form work complete all as specified and as directed.
Material and labour for applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali and fungal resisatance , dirt resistance , exterior paint of required shade (Company depot tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface complete all as specified and as directed.
Material and labour for Complete removal of existing treatment on walls and Preparation of old decorated plastered wall surfaces and applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depot tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm complete all as specified and as directed.
Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a preparatory coat of 1 mm thick wall care putty on plastered wall surface complete all as specified and as directed.
Material and labour for Preparation of old decorated plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and as directed.
Material and labour for Preparation of old decorated plastered ceilling surfaces and applying two coats of distemper oil emulsion complete all as specified and as directed.
Material and labour for Complete removal of existing treatment on walls and Preparation of old decorated plastered wall surfaces and applying two coats of cement based paint complete all as specified and as directed.
Material and labour for Preparation of old painted steel surface of any descripation over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for Preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Surface excavation not exceeding 30 cm deep and averagng 15 cm deep and getting out in soft/loose soil, etc complete all as specified and as directed.
Excavating in post holes each n exc 0.5 cum ,getting out, in soft /loose soil, returning ,filling in and ramming earth or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to a distance nexc 50 m and making good the surfaces complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD
Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge /roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD
Supply and fix Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc,complete all as specified and as directed.
Supply and fix Rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confiming to Fe 410 -W (Gde E- 250) quality A, complete all as specified and as directed.
Supply and fix MIld steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
Supply and fix Rolled mild steel post and struts in fencing and similar work including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets for securing wire mesh etcand similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.
Supply and fix 5 mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 , complete all as specified and as directed.
Material and labour for Aluminium anodised door with standard section of size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet glass ordinary quality in top panel and 12mm thick pre laminated particle board exterior grade pre laminated both sides with decorative choice lamination includind fitting etc with Aluminium (die cast ) body door closer hydraulically regulated designation no :03 universal type,Aluminium anodised handle,mortise lock heavy duty and door spring heavy duty (ISI MARKED) etc. complete all as specified and as directed.
Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iii) Make of glass :Saint gobain/Modi guard/Gold fish. (iv) Make of prelaminated particle board : Kitply/Century Ply wood .
Material and labour for Preparation of new steel surfaces of any descripation over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.
M/S MAHADEV M PATIL
M/s. N D KALING
M/s. KIRAN M CHOUGULE
SAGAR ENTERPRISES
DHANSHRI ENTERPRISES
M/s. J P CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .