8443 E8 SPECIAL REPAIRS TO WATER DISTRIBUTION LINES NEAR BUILDING NO

Amount

SCHEDULE A PART I (B/R WORKS) Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil all as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick all as directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Material and labour for Plain Cement Concrete 1:4:8 Type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks , type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar1:6 complete all as directed.

Material and labour for Providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as directed..

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparing new plastered surfaces of walls and applying Two coats of cement base paint over a coat of chalk whiting primer complete all as directed.

Material and labour for Providing plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in copings,benching , bed plates, pintle blocks including chamfers necessary form work complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Material and labour for LT UG XLPE insulated armoured PVC sheathed heavy duty electric cable of size 10 Sqmm 2 Core with aluminium conductor 1100 volts grade confirming to IS- 1554 laid in trenches /cable ducts, fixed to wall/pole with necessary clips/clamps complete all as specified and as directed. NOTE: Excavation & Earth work, Sand cushioning & Cable protection sahll be measured & paid seperately.

Material and labour for LT UG XLPE insulated armoured PVC sheathed heavy duty electric cable of size 16 Sqmm 4 Core with aluminium conductor 1100 volts grade confirming to IS- 1554 laid in trenches /cable ducts, fixed to wall/pole with necessary clips/clamps complete all as specified and as directed. NOTE: Excavation & Earth work, Sand cushioning & Cable protection sahll be measured & paid seperately.

Supply and filling dry sand in trenches including spreading for cushioning of LT UG cable and punning down complete all as speified and directed by Engr-in-charge. Note : For payment purpose punned down thickness shall only be measured and paid.

Supply and lay well burnt sub class ‘B’ bricks of standard size for protection to under ground cables, laying with length of the bricks equal to the width of the trench complete all as speified and as directed by Engr-in-charge.

Boring of holes under road, pavement , hard standings by trenchless technology using ultra sound technique and necessary machine including HDPE pipes of 100 mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed.

Supply and fix LED post top made of cast aluminium with decorative opal polycarbonate di user with IP 65 protection including suitable size and length of GI pipe for mounting including suitable cable junction box having with connectors for in out purpose and MCB control and making all necessary connections with suitable size of cable not less than 2.5 sqmm from junction box to fitting complete all as specified and as directed. MAKE: Bajaj Cat part No BGCL 40 W LED WH or equivalent in Havells / CG / jaquar. NOTE : The quoted rate is deemed to include for junction box with MCB and connectors , PVC Copper connecting cable, GI pipe and LED light fitting complete.

Supply and fix LED 21W Solar street light fiting (2100 LUMENS )blue tooth enabled standalone dimmable solar street lights with MPPT CHARGE CONTROLLER INBUILT IN SNGLE PCB , 100 WP panel, 100 AH battery, 12 v system, 5MTS octagonal pole , sheet metal batterybox with all acessories STANDARDS -EN50530 for MPPT performance,Solar Panel:IEC 61215,Electronics, EN50530 : MPPT Performance evaluation , IEC62124 : Solar standalone system performance ,IEC61347-2-13 : LED driver safety ,IEC 62384 : LED driver performance, CISPR 15 : Radio disturbance characteristics, IEC61547 : EMC Immunity requirements ,IEC60598 : General requirements and tests: with 36 hrs back up complete all as specified and directed. Make : Philips, Cat No : BRP409 -21 W or equivalent in Havells / CG / jaquar

Supply and fix GI tubing light grade 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed.

Supply and fix GI tubing light grade 25 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed.

Material and labour for cutting of metallic road/ hard standing/hard rock/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1,using 20 mm graded crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface including suitable size of HDPE pipe complete all as specified and as directed.

Supply and fix LED Flood light fitting 60 Watts (IP66) with LM6 pressure die cast aluminium housing with manufacturers logo embossed on the housing for traceability ( stickering/ printing not acceptable) and toughened glass/ polycarbonate cover, system Lumens-6000 lumens, system wattage should not exceed 30 watts LED with individual peanut lens and lena plate for better optics including suitable size clamps, bracket, nuts, bolts and washers etc for mounting on GI pipe complete all as specified and as directed. Note :- GI pipe will be measured and paid separately under releavant item

Supply and fix cable joint/terminal boxes factory made, made out of 1.0 mm thick PVC sheet, powder coated with door with locking arrangements of size 10 x 10 x 5 cm housing in and including suitable cable connectors for one incoming and two out going (03 Nos) on porcelain insulator with proper size of screw in/out cable gland of suitable size of cables complete fixed on beam/pole with clamp/bracket, nuts, bolts and washers etc complete all as specifed and directed.

Material and labour for Two single core PVC insulated FRLS unsheathed multi stranderd copper conductor cable 2.5 Sqmm drawn through in PVC conduit/pole of suitable size heavy duty with all accessories / passing through the existing provision made in steel tubular pole complete all as speified and directed.

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through and including PVC conduit of size not less than 20mm concealed in wall / surface including provision of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed for One celling/Exhaust/wall mount fan point controlled by one way switch. Note : Cost of cutting chases and making good to disturbed surface to match with existing surface are deemed to be included in quoted rate.

All as per sl item No 23 here in before but for One socket outlet 5 Amps 5 pin on independent board complete all as directed.

All as per sl item No 23 here in before but for One light point controlled by one way switch .

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch socket combination outlet 2in1, 3 pin 5 Amps flush type all as specified and directed.

Supply and fix ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed.

Supply and fix Exhaust fan 380 mm sweep 1400 RPM BEE 5 star rating witth clamps,nut&bolts, Rubber bushes , wire mess, flap cover with all accessories complete all as specified and directed. Make Havells/Bajaj/crompton

Supply and fix Ceiling fan 1200 mm sweep BEE 5 star rating witth clamps,nut&bolts, Rubber bushes , with all accessories complete all as specified and directed.

Supply and fix Wall mounedt fan 450 mm sweep BEE 5 star rating witth clamps,nut&bolts, Rubber bushes , with all accessories suitable for wall mounting complete all as specified and directed.

Supply and fix down lighter 2'X2' 35 Watt suitable for fixing at ceiling complete all as specified and directed. MAKE: Crompton Cat part No LCTLR-36-F0-CDL or equivalent in Bjaj or Jaquar.

Provision of chemical earthing with copper earth plate electrode 900X600X5mm thick burried directly in ground (earth pit not less than 4.5M deep below GL) with top edge of plate not less than 4.5 M deep below ground level, earth plate surrounded from all sides by 20cm thick salt and charcoal dust and MgSo4 filling in alternate layers and electrode connected by using copper strip 32X6mm by means of bolts, nuts check nuts and washer made out of brass and protected by light grade 50mm dia GI pipe connected to earthing test points and GI pipe medium grade 20mm bore for watering including funnel, wire mesh, PCC (1:3:6) type C2 40mm graded stone aggregate including excavation and earth work in any type of soil and disposal of suplus soil to a distance n exc 50 mtr and necessary testing complete all as speified Note : (i) Cost of any additional compound if any required to achive earth resistance less than 1 ohm shall be deemed to be included in the quoted rate (ii) Copper strip 32X6mm beyond 7.5 m length shall be measured and paid separately

Material and labour for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos. 8 mm dia., 25 mm long hex head, screw complete all as directed

Supply and fix Bib cock brass, chromium plated, screwed down for size 15 mm dia pipe completed all as directed.

Supply and fix earth continiuty conductor or main earthing lead fixed on wall on batten or recess or chases or buired in ground or drawn in conduit / pipe or fixed to pole or any other indicated suituation for loop earthing etc, as required for copper strip 32 mm x 6 mm with proper saddles/spacer, screw etc., complete all as specified and as directed. Note : All joints of copper shall be of brazing only

Supply and fix single core PVC insulated FRLS unsheated multi standard copper cable of size 6 sqmm completev all as directed.

Supply and fix non metalic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees,bends,elbows, reducers, belt mouth tube end and fixing accessories such as couples, lock nuts, pipe hooks etc complete all as directed.

Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20mm complete all as directed.

Supply and laying Tubes medium grade galvanised with all fittings laid in trenches of size 25mm complete all as specified and directed.

Taking up absestos cement water pressure Pipes (Cement Pipe Lines) of 100 mm (4") dia any class (includings all fittings), including disconnecting pipes and fittings including earth work complete all as specified and directed.

Taking up Cast iron water mains Pipes (CI Pipes Lines) of 100 mm (4") dia any class (includings all fittings), including disconnecting pipes and fittings including earth work complete all as specified and directed.

Taking up sluice valves /Air Release Valves of any sizes from pipe lines complete all as specified and directed

Taking up Gun metal/Gate Valve of any size from pipe lines complete all as specified and directed.

Material and labour for Ductile Iron Pipe (DI Pipes) S/S including special Class K-9,100 mm (4") dia laid in trenches complete all as specified and directed.

Supply and fix Sluice valve 1.6, 100mm (4") dia, conforming to IS-13095, fixing to CI/DI water supply mains complete all as specified and directed.

Taking up or down existing GI steel tubing and removing to stores including disconnection of fittings from tubing where required of size 80mm bore .

All as per Sl item No 47 here in before but 50mm bore.

All as per Sl item No 47 here in before but 40mm bore.

All as per Sl item No 47 here in before but 25mm bore.

Refixing of old serviceable GI tubing of size 80mm bore in new or old positions including cleaning, cutting, threding all as directed, along with GI fittings where ever replaced and required at site complete all as directed.

All as per Sl item No 51 here in before but 50mm bore.

All as per Sl item No 51 here in before but 40mm bore.

All as per Sl item No 51 here in before but 25mm bore.

Supply and fix 80mm bore GI tubing medium grade with all fittings laid in trenches complete including cutting and thereading all as required at site and all as directed.

All as per Sl item No 55 here in before but 50mm bore.

All as per Sl item No 55 here in before but 40mm bore.

All as per Sl item No 55 here in before but 25mm bore.

Supply and laying 250 mm dia Reinforced concrete pipes, class NP2, laid and jointed with collarscomplete all as directed.

Cutting the existing road/hard standing/chequered cement concrete tiling/PCC flooring etc , not exceeding 50 CM wide and not exceeding 50 CM depth for laying of CI/DI/GI pipe 150/100/80/50/40/25 mm dia including returning, filling with excavated earth and making good disturbed of road/hardstanding top surface with 200mm thick PCC(1:3:6)type C2 using 40mm grade stone aggregate complete all as directed by Engr-in-Charge.

Supply and fix Gun metal globe or gate valve with iron wheel head srewed both end for iron pipe and fixed of size 50 mm complete all as specified and directed.

Supply and fix Gun metal globe or gate valve with iron wheel head srewed both end for iron pipe and fixed of size 40 mm complete all as specified and directed.

Supply and fix Gun metal globe or gate valve with iron wheel head srewed both end for iron pipe and fixed of size 25 mm complete all as specified and directed.

Material and labour for DI fittings as per IS for spigot and socket pipes for water mains/branches lines such as bends(any type radius and angle) tapers any type (straight,bend)increasing,decresing,or double socket etc tee pieces,single branch, Y juntion, double branch, cross(all socket,socket and spigot)collars,caps & plugs, including connecting pieces one end flanged and other socket or spigot and bell mouth piece suitable for run lead joint, up to 300 mm bore complete all as specified and directed.

Material and labour for Construction of Valve chamber of size 900mmx 900mm x 900mm (internal dimension) with precast cement concrete block of PCC 1:3:6 type-C-1 using 20mm graded stone aggregate in CM 1:6 and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces with and including 40x40x6 mm mild steel angle iron frame and 3mm thick MS sheet cover including locking arrangement with 1 No 50 mm size 4 level lock with key in duplicate of make :Navtal or equivalent, incl painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and as directed including demolition of old Valve chamber.

Supply install test and commissioning of Air cooled copper wound isolation transformer copper wound 1 KVA capable of protection of off load from noise, spick and surges that appear in main supply and minimise the earth to neutral potential with single 230 V complete all as directed.

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through and including PVC conduit of size not less than 20mm concealed in wall / surface including provision of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm all as specified and directed for One socket out let 15 Amps 5 pin on independent board complete all as specified and directed. Note : Cost of cutting chases and making good to disturbed surface to match with existing surface are deemed to be included in quoted rate.

Supply and fix Switch socket combination flush type 5A/ 15 A 5 in 1 all specified and directed.

Material and labour for submain wiring with two runs of 2.5 sqmm multistranded copper conductor PVC insulated (FRLS) 1100Volts, grade and one run of 2.5sqmm PVC insulated (FRLS) multistranded copper earth continuity conductor including lugs of suitable size drawn through and including non metalic rigid PVC conduit medium grade of suitable size but not less than 20mm dia along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and directed. NOTE :- Two runs of cable , 1 run of earth continuity conductor and run of PVC Conduit shall be measured as one Running metre.

Material and labour for submain wiring with two runs of 4.0 sqmm multistranded copper conductor PVC insulated (FRLS) 1100Volts, grade and one run of 4.0 sqmm PVC insulated (FRLS) multistranded copper earth continuity conductor including lugs of suitable size drawn through and including non metalic rigid PVC conduit medium grade of suitable size but not less than 20mm dia along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and directed. NOTE :- Two runs of cable , 1 run of earth continuity conductor and run of PVC Conduit shall be measured as one Running metre.

Supply & install AC hi wall split unit indoor / outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality minimum 3 Star rating inverter type with R-410a/R-32 gas capacity 1.5 TR complete all as specified and as directed by Engineer-in-charge.

Supply & install Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilizer at accuracy of + 2.5% and of capacity 5 KVA complete all as specified and as directed by Engineer-in-charge.

Supply and fix sheet mental enclosure single phase and neutral with two pin and earth plug and socket complete with single MCB complete all as specified and directed.

Supply and fix sheet metal enclosure for distribution board double door SPN 240V 4 way 200 Amps rated busbar complete all as specified and directed

Supply and fix MCB single pole, 240Volt 40 Amps 10 KA rupturing capacity , C series complete all as specified and directed.

Supply and fix MCB single pole & neutral 240 volts 40 Amps 10 KA rupturing capacity C series complete all as specifed and directed

Supply, installation,testing and commissioning of factory made panel board with CPRI approved (61439-1)of size length 1.2mtr,height 1.04mtrs and depth 0.35mtr suitable for floor mounted made out of CRCA sheet of 2mm thick outdoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement space for AC 230volts including lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc. epoxy poweder coated spray paint with primer complete all as speicifed and directed. including the following accessories:- (a)Incoming: MCB 63 amps 04 pole ,415 Volts, 16 KA - 01 No.(b) R-Y-B phase LED indicating lamp-03 Nos (c) Copper bus bar 200 Amps current carrying capacity. (b)Out going: (a) MCB 32 Amps TPN, 230 Volts, 10 KA -03 - Nos. all as specified and directed. Make:- Indo asian/ Scinader/ Siemens or equavalient approved make

RAMESH BABU CO