Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹43.9 L+₹3.5 L (8.53%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹46.7 L+₹6.3 L (15.5%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹49.3 L+₹8.8 L (21.8%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹51.2 L+₹10.8 L (26.6%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹4.4 Cr
EMD Value
₹8.8 L
Closing Date
6 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Special Repairs to Bldg No P-7 P-8 P-9 and P-17 to P-19 at BTR and Provision of Paver Block lined path infront of ORs MD accn at Outram lines AC Depot in the area of AGE B/R II under GE (N) Ahmednagar
2022_MES_544810_1
8970 /E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat a(i)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Ahmednagar
₹8.8 L
Yes
15 Sept 2022
12 Aug 2022
8 Sept 2022
12 Aug 2022
6 Sept 2022
25 Aug 2022
Amount
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge
Demolition of brick/ stone masonry/block masonry built in cement or lime mortar etc complete all as specified and directed by Engineer-in-Charge
M&L for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only), in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n. exc 4.0 Sqm etc complete all as specified and directed by Engineer-in-Charge
Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of mangalore pattern red colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge
S&F of Mild Steel work in tubular trusses including special shaped washer etc complete conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge
S&F of mild steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge
M&L for rendering 10mm thick in cement and sand mortar (1:4) over concrete surfaces, finished even and smooth including water proofing compound as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge
M&L for raised pointing to random rubble masonry in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC (1:2:4) Type B-1 (20 mm graded stone aggregate) as in hold fast blocks and rafter bed blocks and Gola etc complete all as specified and directed by Engineer-in-Charge
M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture etc complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm thick Cement concrete type B-2, 1:4:8 using (40mm graded stone aggregate) as in sub base etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) as in foundation /mass concrete etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC solid block masonry type C1 (1:3:6) using 20 mm graded stone aggregate built in cement and and mortar (1:6) width exc. 10 cm etc complete all as specified and directed by Engineer-in-Charge
M&L for mat finish Vitrified ceramic tiles 600x600mm 8 to 10mm thick as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set with neat cement slurry and jointed and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for joint free non skid mat finish ceramic coloured tiles size of each tile 400x400 mm 7-8 mm thick , as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set with neat cement slurry and jointed and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
Material and labour for joint free non skid ceramic coloured tiles size of each tile 300x300 mm 7-8 mm thick , as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set with neat cement slurry and jointed and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
M&L in repairs for machine cut kota stone slab flooring 20-25mm thick laid over and including 20 mm thick screed base in cement and sand mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge
M&L in repairs for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge
M&L for Digitalyy printed Glazed ceramic coloured tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles laid over and including 10 mm thick back coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding exposed edge laid over and including screed bed 15mm thick in cement and sand mortar (1:4) jointing & pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polishing exposed edge to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge
Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs Counter top wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge.
Supply & Fix in repair health faucet with 8 mm dia 1 mtr long flexible tube wall mounted/hooked etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair bib tap, 15 mm dia, long body, quarter turn,foam flow, fancy type CP cast copper alloy screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair pillar tap, swan neck, quarter turn,foam flow, fancy type cast copper alloy, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs, over head shower with long shower arm not less than 300 mm, shower rose fitted on adjustable pivot adjustable 100 mm dia etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws with concel cap mn 60 mm dia, ring length minimum 210 mm of approved quality, minimum weight 200 gram each etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs decorative towel rail recangular chromium plated fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge
S & F in repairs looking mirror of size 600 mm x 450 mm 5mm thick with PVC decorative frame of 1'' width mounted on PVC sheet base etc complete all as specified and directed by Engineer-in-Charge.
S&F anodised aluminium window powdercoated and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21100mm long (2 No.) suitable handle (1 No.) complete all as specified
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings etc complete all as specified and directed by Engineer-in-Charge
S&F 35 mm thick second class hardwood glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated shash bars including beads mitered for securing glass wire gauge etc complete all as specified and directed by Engineer-in-Charge
M&L for 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge
S & F Pressed steel door frame of size 125 x 60mm (thickness of sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge
S & F pressed steel door frame of size 100 x 60mm (thickness of sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge
M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge
M&L for 2 mm mesh, Wire netting of galvanised steel wire 0.71 mm dia fixed with tinned tacks of wire staples etc complete all as specified and directed by Engineer-in-Charge
Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge
Material and labour for preparation of new wood and wooden based surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed by Engineer-in-Charge
Material and labour for preparation of new steel surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engineer-in-Charge
M&L for forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge
M & L for Taking up or down steel tubing 15 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge
M & L for Taking up or down steel tubing 20 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge
M & L for 16 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge
M & L for 20 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge
M & L for preparing new plastered surfaces of wall and applying two coats of OBD over a layer of 2mm thick putty finish finished with roller finish on plastered surfaces of wall incl preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge
M & L for preparation of plastered surface of stone walls and applying 2 coat of exterior emulsion synthetic enamel paint over a coat of alkali resistant primar on external surfaces etc complete all as specified and directed by Engineer-in-Charge
S&F in repair wall mounted cloth drying stand consisting of 16 mm dia powder coated MS rods of CR steel mounted on powder coated MS square pipe, 16- 4 rods, 4ft each, total weight not less than 3.80 Kg, fixed to wall including all fittings/accessories etc complete all as specified and directed by Engineer-in-charge Make -Easy dry Model: Mount it or Equivalent product in Nirali/Prayag.
Supply only intergral water proofing compound etc complete all as specified and directed by Engineer-in-Charge
M&L for excavation over area n.exc. 1.5 mtr deep in soft and loose soil and getting out etc complete all as specified and directed by Engineer-in-Charge
Removing of excavated material exc. 250m but n.exc. 500m and depositing where etc complete all as specified and directed by Engineer-in-Charge
M&L for formation rolling with 8 to 12 ton power roller etc complete all as specified and directed by Engineer-in-Charge
M&L for moorum/red bajari filling 200mm thick, spread, levelled, rammed, consolidated and rolled with 8 to 10 tonnes vibrator power roller to camber and gradient required including watering and well ramming complete, all as specified and directed.(Note:- Consolidated thickness shall be measured) etc complete all as specified and directed by Engineer-in-Charge
M & L filleting in any position and to any shape, Section of fillet exc. 25 but n exc. 50Sqm in cement and sand mortar (1:3) including all mitres, stops, etc complete all as specified and directed by Engineer-in-Charge
M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and directed by Engineer-in-Charge
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc complete all as specified and directed by Engineer-in-Charge
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5 Amp single pole one way
One fan point controlled by switch 5 Amp single pole one way
One bell point controlled by one switch 5 Amp single pole, one way on independent board
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
One light point controlled by switch 5 Amp single pole two way
All as per Item No 72 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F bell Multi music type elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 16 Amp, onw way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts Concealed in Wall,protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent makes mentioned in list of makes in Appendix `C'
S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent makes mentioned in list of makes in Appendix `C'
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply and fix Industrial type ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack Industrial type LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.
S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V, 50 HZ etc complete all as specified and directed by Engineer-in-Charge
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 6 sq.mm cable i.e for one run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge
M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-
(a) LT cable10 Sqmm, 4 core.
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge
Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge
Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge
Taking out/down and opening of existing ceiling fans 1200 mm sweep,from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material /items , making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed.
Material and labour for preperation of ceiling fans 1200 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting on required gloss with white synthetic enamel paint on complete body of fans and writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge
An amount of Rs 1,12,654.00 shall be deducted from BOQ on account of schedule of credit
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .