SPECIAL REPAIRS TO BUILDING NUMBER P 50 JCOS CLUB AND P 100 SINGLE JCOS LIVING AT ADMINISTRATIVE AREA CPE ITARSI UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) and removal of all debris complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) and removal of all debris complete all as specified and directed.

Excavating over areas / under floor n exc 1.5m deep and getting out in soft /loose soil below floor complete all as specified and directed.

Removing excavated material to a distance n exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for moorum and sand filling in ratio 1:1 under floors or pavings laid in layers n exc 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floors, finished even and rough to receive topping complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor, finished even and rough to receive any type of tiles complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in pavement/ plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement complete all as specified and as directed.

Taking down chowkats or frames with shutters (door, windows & Ventilators) (without taking off shutter from frames) not exc 1.5 Sqm each and making good of disturbed surface match the existing surface complete all as specified and directed.

Taking down chowkats or frames with shutters (door, windows & Ventilators) (without taking off shutter from frames) exc 1.5 Sqm but not exc 4 Sqm each and making good of disturbed surface match the existing surface complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Re-fixing of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in same opening complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings, blocks, filling in frames and other similar work and the like including weathering, slightly rounded and throating etc; complete all as specified and directed.

S&F of 125x60mm size pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fasts (40x3mm-6 Nos) etc; size /profile of frame as per IS complete all as specified and directed.

S&F of 105x60mm size pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fasts (40x3mm-6 Nos) etc; size /profile of frame as per IS complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on any faces of brick or concrete surface of walls, finishing with surface even and smooth withoutusing extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces of concrete, finishing with surface even and smooth withoutusing extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster externally in cement mortar 1:4 mixed with using WPC as per manufacturer instructions with cement, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid separately.

M&L for 15 mm thick screed bed of in cement mortar 1:6, finishing the surfaces even and rough for receiving tiles complete all as specified and directed.

Supply only integral water proofing compound of approved make complete all as specified and directed.

S&F for galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.0mm, fixed with ms steel wire staple complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white washing complete all as specified and directed.

M&L for prepration of old decorated plastered surfaces of ceiling and applying two coats of white washing complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats oil bound distemper over a coat of alkali resistant primer with and including 3mm thick wall care putty and making the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats oil emulsion distemper over a coat of alkali resistant primer with and including 3mm thick wall care putty and making the surface even and smooth complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litres and UV reisitance as per IS 15489:2004, alkali & fungal registance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litres/10 sqm over and including priming coat of exterior primer applied @ 0.90 litres/10 Sqm over newly plastered surfaces of walls complete all as specified and directed.

S&F of 40mm thick flush shutters factory made with solid core construction with block board core and plywood face panels, both side covered with decorative face veneer with lipping/ frame to match complete all as specified and directed.

S&F of factory made 30mm thick 100% solid WPC ( Wood polymer Composite) Laminated Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Comprasive strength of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free, Water/ Moisture Proof and Fire Retardant, WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing Mosquito mesh and XTN aluminium mesh combindly panel area of door except stiles and rails, panelled with mesh with self tapping round headed screws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed.

S&F of factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fib (wwod powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame densit of 750 kg/cum screw withdrwal strenth of 2200 N (Face) and 1100 N (Edge) minumum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/ lug/ SS dash fasterrs of required dia and length complete all as specified and directed.

S&F of factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F of aluminium powder coated windows having three track with aluminium section 92 x 31.75 mm having weight of bottom section 1.070 kg/m, top & styles of 0.933 kg/m, shutter section 40 x 18 mm (weight of handle section 0.417 kg/m) other section of 0.547 kg/m, mounted on bearing to slide on tracks in approved shade with and including 5mm thick plain glass and stainless steel wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with silicon sealants and making it water proof in all manner complete all as specified and directed.

S&F of aluminium powder coated ventilators having fixed glass with aluminium section having section 50.80 x 25.40 mm (weight 0.489 kg/m) glazing clear section with locking clips (weight 0.109 kg/m) with and including 5mm thick frosted glass and making frame and glass water tight etc. complete all as specified and directed.

S&F of 100mm size stainless steel butt hinges, premium grade and fixed to frames by welding complete all as specified and directed.

S&F of 150mm long aluminium handles cast type, anodised and fixed to frames with ss screws complete all as specified and directed.

S&F of 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed with ss screws complete all as specified and directed.

S&F of aluminium alloy, anodised, sliding door bolt with hasp 300mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for granite stone slab (of any type) 20 mm thick, machine cut, bedded, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Labour only for rounding to edges of granite slabs, one edge, such as in cooking platform and other similar work complete all as specified and as directed.

S&F of 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws as in cupboard shutters to timber/steel frame work complete all as specified and directed.

Dismantling boarding of any description, fixed in any position complete all as specified and directed.

S&F of 18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and fixed with screws complete all as specified and directed.

S&F of 100mm long hasp and staple, mild steel, wire type, stove enamelled black including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F for external teak wood lipping, 6mm thick fixed with nails on 18/19 mm thick block board complete all as specified and directed.

S&F for external teak wood lipping, 6mm thick fixed with nails on 12mm thick plywood complete all as specified and directed.

M&L for preparation of wood or wood based surfaces of any description exceeding 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of steel or iron surfaces of any description exceeding 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description exceeding 10cm with or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for light shade vitrified tiles 9-10 mm thick thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles; bedded over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade vitrified tiles 9-10 mm thick thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dado, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles; laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid coloured tiles 7-8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450x350x7mm thick on vertical surfaces such as skirting, dados etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incluidng 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for reinforced cement conctrete 1:1.5:3, type A-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately)

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia) including welding, rivetting etc; of grade Fe 410-W (Gde E 250) complete all as specified and directed.

S&F of mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia) including welding, rivetting etc; of grade Fe 410-W (Gde E 250) complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. for flat rough finished surface of concrete complete all as specified and directed.

Dismantling ceiling board of any description, fixed in any position with nails in roofing complete all as specified and directed.

S&F of powder coated GI snap grid frame work for false ceiling, size of grid 605x605mm suspended to hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F of 4.00mm thick non asbestos fibre cement building boards fixed to GI framework with screws complete all as specified and directed.

M&L for heavy duty exterior grade coloured tile of texured finish of 300x300x10 mm thick mic/vitrified tile as in floors, steps etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incluidng 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F in replacement kitchen sink made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste coupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915 x 460mm & bowl size 410 x 330 x 160mm complete all as specified and directed.

Dismantling of PVC water tanks of capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed.

Dismantling of PVC water tanks of capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed.

S&F of 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm dia PTMT ball brass valves with polythene float and flynut complete all as specified and directed.

S&F of 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm dia PTMT ball brass valves with polythene float and flynut complete all as specified and directed.

S&F in replacement gun metal, globe or gate valves for 15 mm dia bore pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of stop valves 20mm bore, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Taking down up and down steel tubing 15 mm bore of any description complete all as specified and directed.

Taking down up and down steel tubing 20 mm bore of any description complete all as specified and directed.

Taking down up and down steel tubing 25 mm bore of any description complete all as specified and directed.

Taking down up and down steel tubing 40 mm bore of any description complete all as specified and directed.

Cutting chases pining in brick, concrete walls built in cement mortar and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, lintels etc; and cutting chases for concealed water tubing cutting of girth exc 10 cm but not exc 20 cm girth complete all as specified and directed.

S&F of 15 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F of 20 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F of 25 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F of 40 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old GI pipe 15 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old GI pipe 20 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repairs 15mm bore bib tap chromium plated facy type, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore angle valve /stop valve chromium plated fancy type, cast copper alloy, screwed down high pressure with capstan head, screwed both end for pipe or for unions complete all as specified and directed.

S&F in repairs PVC low level 10 litres capacity valveless syphonic action type white flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc complete all as specified and directed.

S&F in repairs viteress china squtting pan "Orissa pattern" of size 580x440mm white with integral foot rest and flush pipe complete with and including provision of cement concrete bedding 1:2:4 type B-0 to match with the existing complete all as specified and directed.

S&F in repairs WHB white of size 550x400mm vitreous china (flat back or angle back type) any size including cutting for and pinning end of bracket or stand with and including CP waste coupling and PVC waste pipe complete all as specified and directed.

S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F of chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type including all fittings with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and directed

S&F in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

S&F of pillar taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for 15mm bore pipes and fixed complete all as specified and directed.

S&F of PVC connection 15mm bore size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F of swivel shower of PTMT any colour for fixing with 15mm pipe (Min wt 40 gms) complete all as specified and directed.

S&F in repairs stop valves, 15mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type) screwd down, high pressure with capstan head, screwed both ends for iron pipes complete all as specified and directed.

Demolition and breaking up or down 75/100mm internal dia of pipe PVC /AC, fixed in any position complete all as specified and directed.

S&F of 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

S&F of PVC (SWR) cowl 75 mm dia complete all as specified and directed.

S&F of PVC (SWR) branch piece, 110 mm dia, single (single Y) equal or unequal and fixed with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 110 mm dia, setting and jointing with solvent cement complete all as specified and directed.

S&F of 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Removing existing roof teatment including backing coat and cleaning the roof slab surfaces by sweeping & washing down with water to remove dust & foreign materials with and including M&L for providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed consisting of following steps:- (a) Providing 5 mm thick plaster in cement mortar (1:3) using water proofing compound to roof, finished the surface even and smooth without using extra cement. (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm. (c) Supply and laying APP based polymeric membrane minimum weighing 3 kg/sqm of minimum 3mm thickness reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) landed on primed surface by forced application including coping on the surfaces with torch application of membrane with 10cm over laps as required. (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

S&F of stainless steel curtain rails/rod of 20mm dia with fixing decorative brackets at both ends/ stops and finials (latoo) complete all as specified and directed.

Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks in cement mortar 1:6, straight or curved on plan exc 6m mean radius as in walls and similar work complete all as specified and directed.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajja/ roof covering/ cladding to wall, fixed with self tapping screws or with 'J' or 'L' hooks as required complete all as specified and directed.

S&F for mild steel framed work brackets for chajjas of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc; not exc 10 kg each brackets conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F of mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of rolled mild steel Fe-410-w (grade E-250) quality A framed work such as tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St 240 complete all as specified and as directed.

S&F of stainless steel plate rack of standard pattern of size 900 x 750 x 250 mm with 1mm thick stainless steel sheet & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

S&F of hard drawn steel wire fabric not exc 4 kg/sqm, cut to length as required, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key duly welded with existing reinforcement including all T&P, welding, L-clip etc and tying with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for preparation of new plastered/ previously plastered surface and applying two coats of damp proof chemical of approved make complete all as specified and directed.

Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten ( light, fan, socket, bell or power ) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bells, light fittings of any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including sunk sheet steel terminal box concealed in wall with and incluidng modular cover plate with frame of suitable size as required at site for mounting of fittings like switches, sockets, fan regulators etc. fixed with screws complete all as specified and directed for the following :-

(a) One light point/fan point controlled by one way switch

(b) One socket outlet 5 Amps controlled by one way switch on the same board.

(c) One socket outlet 5 Amps controlled by one way switch on independent board.

(d) One bell / buzzer controlled by one bell push.

All as per item No. 114 here-in-before but with 2.5 Sqmm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 Sq mm PVC insulated multistranded copper conductor cable as continuous earth wire complete.

All as per item No. 114 here-in-before but with 4 Sqmm multi stranded copper conductor cable for one 15 Amps socket outlet/neutral enclosure for control of air conditioner controlled by one switch on independent board and 2.5 Sq mm PVC insulated multistranded copper conductor cable as continuous earth wire complete.

S&F of single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB, 20 Amps with accessories complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring and 4.0 sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 6 Sq mm copper conductor cable, one run of 4 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

S&F of ceiling rose surface bakelite two to three terminal complete all as specified and directed.

S&F of ding dong bell AC, 240 Volts single pole complete all as specified and directed.

S&F of modular bell push 6 A, 240 V, 1 module complete all as specified and directed.

S&F of fan regulator, step type, 120 W, 240 V, 2 module complete all as specified and directed.

S&F of modular switch, 1 way, 6 A, 240 V, 1 module complete all as specified and directed.

S&F of modular switch, 2 way, 6 A, 240 V, 1 module complete all as specified and directed.

S&F of modular switch, 1 way, 16 A, 240 V, 1 module complete all as specified and directed.

S&F of modular socket, 6 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of lamp holder of polycarbonate body with back plate with and including 9 Watt LED bulb complete all as specified and directed.

S&F of LED tube light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size from ceiling rose complete all as specified and directed.

S&F of LED light fitting, mirror type with high output diffuser, 2 feet long, 10 W, 220 V, AC decorative type with driver holder and LED lamp including including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size complete all as specified and directed.

S&F of round shape15 watt 220 V,AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, LED lamp suitable for roof ceiling including making connection with 1 Sqmm flexible copper conductor cable 3 core complete all as specified and directed.

S&F of LED luminaire 600 x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with 1 Sqmm three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F of post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including connecting up with 1 Sqmm three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in repairs sheet metal enclosure for MCB, DB, TPN 415 Volts, 200 Amps rated busbar 4 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F in repairs sheet metal enclosure for MCB, DB, SPN 240 Volts, 200 Amps rated busbar 12 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F of MCB single pole, 6 to 32 Amps, 240 Volts and making connections complete all as specified and directed.

S&F of MCB double pole, 16 to 40 Amps, 240 Volts and making connections complete all as specified and directed.

S&F of MCB, TPN, 63 Amps, 440 Volts, 'C' Curve, breaking capacity 10 KA including making connection complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR including earth pit in any soil, charcoal common salt layer 15 mm thick all around earth plate, PCC (1:3:6) type C1 in pit and PCC cover (1:2:4) type B1, water pipe funnel and GI protection pipe light grade 15mm dia upto main switch board complete all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

S&F in replacement building security light fitting LED 35 Watts, energy saving & environmental friendly, long life, versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED as light source with toughened glass and impact resistance PF IK07 and GI pipe 40 mm dia, light grade bracket for mounting light, bent to shape of 1.50 m length and two Nos of MS clamps, nuts, bolts, washers of suitable size and fixing on wall/pole complete all as specified and directed.

Supply and laying of 1100 Volts grade heavy duty XLPE cable of size 35 Sqmm 3.5 core, with aluminium conductor stranded polythylene insulated, served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed and passing through GI pipe including taking down old existing unserviceable cable of any type and size complete all as specified and directed

S&F of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and making necessary connections complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out for foundation, laying under ground cables etc complete all as specified and directed.

M&L for sand filling in trenches for cable cushioning with clean, dry and unwashed sand, free from sharp particles including gently punning around cable complete all as specified and directed.

M&L for sub class 'B' bricks laid flat with equal to length of brick for cable protection laid across the cable complete all as specified and directed.

Returning, filling in with the obtained earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Supply and laying 50mm bore GI tubes, 'light grade' galvanised with all fitting and laid in floors, under road, pavement or hard standing for protection of cable including taking out old pipe complete all as specfied and directed.

S&F of 20 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

S&F of 25 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

S&F of 40 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

Cutting of existing water supply main line in position of inserting specials/fitting viz Tee etc. of suitable size for making branch connection including testing after completion complete all as specified and directed

Deduct Schedule of credit (calculation will be done off line) Rs. 41237.00

TANUJ CONST. CO.

PK CONSULTANT