Construction of Trek Route from Watsar to Kamchnag Temple, Bridal Path, Shelter Shed, Entry Gate with Navigation Pillars and Benches and Bathroom under UT CAPEX Budget 2023

Amount

A- Construction of Entry Gate;Earthwork in excavation by manual means in trenches for foundations, drains, pipes (not exceeding 1.5 m in width) etc all complete in all kinds of soil For vertical posts

Providing, hoisting’s and fixing trusses / purlins / rafters / posts etc including cost of screws etc complete

P/L in position cement concrete of sp. Grade including curing but excluding cost of centering / shuttering etc1 :2:9 (20 mm agg)

Structural steel work in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying prime coat of approved steel primer all complete welded

Providing wood work in frames of doors, windows, or other frames, wrought framed and fixing in position with hold posts or with dash fasteners of required dia and length of second class kail wood

B- Construction of Shelter Shed: Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc(not exceeding 1.5 m in width) and for shafts, wells, cesspits and like not exceeding 10 m2 in plan all complete in all kinds of soil

P/L in position cement concrete of sp. Grade including curing but excluding cost of centering / shuttering. All work upto plinth level with 1:2:4mix (20 mm agg)

Surface dressing of ground including removing vegetation and equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils

Providing, hoisting’s and fixing trusses / purlins / rafters / posts / post plates or like components including cost of screws etc complete. Second class Kail wood

Providing corrugated GS sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers etc complete. 0.5 mm thick with zinc coating not less than 275 g /cum

C- Construction of Bridle Path:Surface dressing of ground including removing vegetation and equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils

Dry random rubble masonry with hard stone in foundation and plinth without bond stone. Nallaha stone (in stretches)

D- Construction of Toilet & Bathroom: Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALL KINDS OF SOIL

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with a) Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth:

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: a) Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 MIX with 20mm nominal aggregates all complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with A) (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

PROVIDING AND LAYING 6MM THICK CEMENT PLASTER AT CEILING 1:3 MIX ALL COMPLEE

PROVIDING AND LAYING 20 MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)`

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. a) Using M.S. angles 40x40x6mm for diagonal braces

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes

Providing and fixing strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete .25 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank OF STAR, SYNTEX, VICTREX, TRIPLE LAYER OF WHITE COLOUR OR EQUIVALENT AS APPROVED BY ENGINEER IN CHARGE .

PROVIDING AND LAYING PVC PIPES OF 100 MM DIAMETER OF SUPREME, PRINCE MAKE ALL COMPLETE

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. A) White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Centering and shuttering including strutting, propping etc. and removal of form for:

SUPPLY AND FIXING OF INTERNAL AND EXTERNAL ELECTRICFICATION INCL FROM SERVICE MAIN TO THE METER POINT AND THEN TO THE MAIN CIRCUIT BOARD, SWITCHES, SOCKET , SWITCH BOARD, MCB ETC READY TO USE WITH INSTRUCTION OF SITE ENGINEER INCHARGE ALL COMPLETE

MOHD ASLAM

Javeed Iqbal Ahanger