ADDITION ALTERATION OF AVIONICS BUILDING P 36 AT CABS BANGALORE

Amount

Taking down door/window chowkhat with shutter [without taking off shutter from the frame] not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down door chowkhat with shutter [without taking off shutter from the frame] exceeding 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and as directed.

Taking down shutters from the frames of any description exc 1 sq.m and n. exc 2 Sqm each.

S&F Second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specifiied and as directed.

S & F factory made pressed steel door frame made out of Mild steel black sheet of 1.25mm thick of profile 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock srike plate etc, complete including one shop coat of priming and threshold of 12mm dia round bar 1 No welded at bottom of frame all as specified and directed

M & L for 30mm thick Flush door solid core construction with veneer faced, black board core and ply wood face panels commercial type on both sides and both the faces are covered with decorative face veneer with lipping/frame to match . Bonding shall be with formaldehyde glue to ensure stronger bonding and longer life of door complete all as specified and as directed.

S & F in repairs Collapsible Steel Gates, Top Hung, consisting of Channel Pickets, Pivoted Flat Bars, Top and Bottom Runners, Brass Handles etc. as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome complete all as specified and directed.

M & L for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of hold fast measured from the face of jamb into wall exc hlaf brick but not exc one brick complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

S & F Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 100mm long complete all as specified and as directed.

S & F Black/Golden colour Solar control film 50 micron thick reflective type sticked to glass panes all as per manufacturer's instructions including taking down damaged filming complete all as specified and directed

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm size, complete all as specified and directed.

S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S & F Aluminium alloy anodised 250mm Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size , quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete

S&F sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane in 3 mm thick , but frosted one side complete all as specified and as directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M & L roughening surface of old concrete including cleaning by picking, sweeping and washing down with water to remove dust complete all as specified and directed.

M & L for Vitrified Tiles, Double Charged, light shade, First Quality, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 Sqm, 9 to 10 mm thick as in Floors, set and jointed in neat cement slurry and pointed in epoxy grout to match over a 5mm thick adhessive bed after roughening the existing concrete surface complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Double Charged, light shade and matching with adjacent floor tile, First Quality, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 Sqm, 9 to 10 mm thick as in skirting , set and jointed in neat cement slurry and pointed in epoxy grout to match including plastring with 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Joint Free Glazed Ceramic Tiles, Coloured, Premium Quality, of size 450 mm X 300 mm, 7 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.

Taking down existing roof treatment of any description including cement plaster of any description on concrete surface of roof slab including cleaning by picking sweeping and washing down with water to remove dust complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 over the existing roof slab including mixing of water proofing compound @3% by weight of cement and surface finished even and smoothcomplete all as specified and directed. Note: Water proofing compound will be measured and paid separately as " Supply only"

M&L for APP bases polymeric membrane minimum weighing 3.5 KG/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 160 gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @0.3 Ltr/Sqm by forced all as specified and as directed. Four course roof treatment consist of as under :- (i) Applying one coat of bituminious primer conforming to IS - 3384 @0.3 Ltr per sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying one coat of bitumen grade 85/25 @1.2 kg/Sqm (iv) Applying two coat of aluminium paint @100ml/sqm

Supply only integral water proofing compound

Demolition of wall and ceiling boards etc of any description and any thickness including cover fillets

Supply and fixing of ceiling system with fine figured edge tiles having humidity resistance (RH) of 95&. NRC 0.34 light reflectance approx 84 & thermal conductivity K-0.052 – 0.057. W/mk colour white fire performance of class-1 as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable for green building application with recycled content of 38-41% with Armstrong or equivalent silhouette profile exposed grid system with 15mm white flanges incorporating 6 mm central reveal in white/black colour. Silhouette, main runners & cross tee to have mitred ends & birds mouth notches to provide mitred cruciform junctions. The Tee sections have a galvanizing of 170 grms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixed to the structural soffit using suspension system at 1200 mm maximum c/c. The first / last suspension system at the end of each main runner should be greater than 450 mm from adjacent wall. Cross Tee 1200 mm long should be interlocked between main runners at 600 mm module. 600 x 600 mm module is formed by fitting 600 mm long flush fitting cross Tee, perimeter trim consist of wall angles of size 3000 x 19 x 19 mm secured to wall screws at 450 mm c/c.complete all as specified and directed. Make: Arm strong / Saint Gobain

Taking down UPVC (SWR) pipe of any dia from trenches/ floors or fixed to wall complete all as directed.

S&F UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors or walls, 110mm bore, complete all as specified and directed.

S&F UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors or walls, 75mm bore, complete all as specified and directed.

S&F UPVC (SWR) bend of any radius, 75 mm bore, with access door, complete all as specified and directed.

S&F UPVC (SWR) bend of any radius, 110 mm bore, with access door, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia out let with grating including jointing with solvant cement complete all as directed.

S & F PVC (SWR) gully trap125/110mm with Grating, seeting and jointing with solvent cement complete all as directed.

S&F PVC (SWR) multi floor trap 75mm dia out let with grating including jointing with solvant cement complete all as directed.

S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, (excluding flushing cistern and flush pipe ) including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including connection to trap complete incl making good the distrubed surface all as specified and as directed.

S & F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, coloured with integral foot rests (excluding flushing cistern and flush pipe) and connections to pipe'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.

S & F in repairs Vitreous china wash hand basin, white, angle back (Oval Type)of size 550 x450mm excluding taps, waste, chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed

S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 Litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC outlet pipe all as directed.

S & F in repairs Flush pipe of polyethylene of low and high density of 32mm dia for low level cistern all as specified.

S & F in repairs brass CP bottle trap 32mm for WHB with inlet and outlet screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs PVC connection 15mm size 600mm long with PTMT nuts complete all as directed.

S & F in repair 15mm dia stop valve concealed type cast copper alloy fancy type chromium plated with long shank and cup including making good to match with existing complete all as specified and as directed.

S & F in repairs Health Faucet (ABS body) MS chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube, ABS wall hook, non return valve including making connections complete all as specified.

S & F Soap dispenser chromium plated complete all as specified and directed. Make : CAT No. 1137 of Jaquar or equavalent

S & F in position chromium plated recessed type Toilet paper roller holder with flap of size 150x150mm with necessary CP screws and washers fixed to walls all as directed.

S & F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

Dismantling of water tanks 1000 litres capacity and removing to store complete all as specified and directed

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, double layered, hoisted and fixed in position with polythene float and flynut complete all as specified and directed.

Supply and laying of 25mm dia outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 Fittings laid in trenches including taking down GI pipe complete all as specified and directed

Supply and laying of 20mm dia outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 Fittings laid in trenches including taking down GI pipe complete all as specified and directed

S & F in repairs Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 455 Grams] etc complete all as specified and as directed

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

S & F in repairs Bib taps, fancy type, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M & L for providing Pre- cast cement concrete block masonry 1:3:6, Type C1 withsolid blocks, exceeding10cm in width and setting in motar, complete set in CM 1:6 complete all as specified and directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on stone masonary finished even and smooth without using extra cement, complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of newly plastered Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over one coat of alkali resistant primer on Wall surfaces complete all as specified and as directed.

M & L preparation of newly plastred surface of wall and applying Two coats of 100% Acrylic premium Weather Proof Exterior Emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance of required shade over and including a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.

M&L complete removal of existing treatment on wall surfaces (Internal) and applying two coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Distemper Emulsion over a coat of alkali resistant primer andtint shall be as approved by the GE complete all as specified and directed Note: Height upto 11M including necessary scaffolding

M&L complete removal of existing treatment on celings and applying two coats of Cement based Wall Care Putty of 1.5mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Distemper Emulsion over a coat of alkali resistant primer andtint shall be as approved by the GE complete all as specified and directed Note: Height upto 11M including necessary scaffolding

M & L for preparation of old plastered Wall surfaces and applying one coat of Acrylic Washable Distemper complete all as specified and as directed.

M&L preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed Note: Height upto 11M including necessary scaffolding

S&F MS Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S & F anodised Powder Coated ( thickness of powder coating not less than 50 Micron) Aluminium frame, Grill for doors and windows, ventilators, partitions with one or more rebates including jointing cleat, rubber beadingfor fixing, star lock etc complete all as specified and as directed.

S & F Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in door shutters, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [2 Nos] per Shutter complete all as specified and as directed. Note: Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Locking Arrangement and fixing only of Panel inserts such as Glass / Gauge / Grills etc.

S & F Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in Window and Ventilator Shutters, Sliding Type, without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No] per Shutter complete all as specified and as directed. Note: [a] Supply only panel inserts such as Glass / Gauge / Grills will be measured and paid separately. [b] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Locking Arrangement and fixing only of Panel inserts such as Glass / Gauge / Grills etc.

S&F sheet glass, ordinary quality, exceeding 0.5 sqm in each pane in 5.5 mm thick , but frosted one side with rubber beading as in doors and partition complete all as specified and as directed..

S & F 12mm thick, Prelaminated Particle Board, exterior Grade, prelaminated on both sides with decorative choice lamination on one side and other side balancing white lamination, fixed to aluminium partitions/doors with rubber beading complete all as specified and as directed.

M & L for 4.00 mm thick sheet glass ordinary quality exceeding 0.50 Sq.m each pane fixed with rubber beading as in windows complete all as specified and as directed.

S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and as directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made up of mild steel heavy duty and fixed complete all as specified and directed

S & F Aluminium extruded body section Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

M & L for Granite stone slabs of 18 to 20 mm thick as in jambs, pillars, window cills, cooking platform, treads of steps etc including making holes and rounding exposed edges, with machine cut edges, rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of any colour / shade, design / pattern as directed, set and bedded with grey cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of granite slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

S & F 12mm thick wave free toughened.clear glass with stainless steel spider fiiting, fish mouth channel in bottom and top as per design with and including provision of all other necessary fixture and accessories complete all as specified and directed

S & F 15mm dia Pillar taps Sensor type with automatic on/off, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F Vitreous china Sensor Urinals of size 635x395x420mm, white, half stall type complete all as specified and as directed.

Alluminium composite panel, Metallic series of approved shade, the panel shall be of 5mm thick with combination of alluminium skin materials of 0.50mm thick alluminium sheet of alloy grade 1100 H cover material coated on exposed side with PVDF (Polyvinylidene fluoride) of KYNAR, PVDF coating containing 70% KYNAR 500 resine for antifungal & anti bacterial properties & the central core shall be natural polyethylene(LDPE and HDPE) bonded to alluminium skin on both sides cladding panel to be fixed with extruded alluminium basic frame 50x25x1.5 mm with angle cleats, weather sealants, revits, GI brakets all as approved using suitable bolts on walls including necessary acessories, scafolding, etc., complete for finished item of work and all as per manufecturer's instructions. all as specified & directed. Make -Erobond /Duro build/Aluco Bond/ Reyno Bond/ Lenox - make as approval by GE. Note :- Anodised aluminium rectangular section, GI brakets etc shall be measured and paid separately under respective items of this sch.

S & F Anodised aluminium rectagular sections of 50x25x1.5mm size as in frame work for wall cladding fabricated to panels of size as directed and including necessary corner cleats etc to accommodate aluminium composite panel fixed to masonary walls/concrete/any other fabrications complete all as directed.

M & L for Galvanised iron angular bracket, 50x50x3mm size, for fixing the rectangular channel (provnon walls with holding bolt) complete all as specified and directed

M & L for Vitrified Tiles, Double Charged, light shade, First Quality, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 Sqm, 9 to 10 mm thick as in Floors, set and jointed in neat cement slurry and pointed in white after roughening the existing concrete surface or coloured cement to match including 15mm thick screed bed in cement motor 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.

Excavation over areas not exceeding 1.50 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M & L for Soling of spread thickness 100mm with broken boulders or quarried stones, interstices filled, surface formed and rolled with power road roller of 8 to 12 ton capacity and consolidated to required gradient and camber complete all as specified and as directed.

M&L for Water bound macadam, 75mm thick (compacted thickness) with broken stone aggregate (sand stone or quartzite) of grading 3 (50 mm to 20 mm size), spread, rolled to consolidated to required gradient & camber, complete all as specified.

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

Use and waste formwork to Edges of Concrete Flats, Treads, Breaks in Floors, Window Cills, Concrete Railings, openings in Concrete Walls, Floor and Roofs not exceeding 20cm wide and sides of RCC / PCC Bands in Walls, horizontal or sloping and similar work for fair finished surface of concrete complete all as specified and as directed

M&L Finishing surface of concrete pavements by brooming complete all as specified and directed.

M & L for forming 20mm wide expansion joints filled with per-formed bitumenous filler board upto approx 35 to 40mm below top of slab for thinkness of concrete pavements 150mm thick complete all as specified and directed.

M & L for forming contraction(Dummy) joints 65mm deep x 10mm wide and filled with per-formed bitumenous filler board upto approx 30 to 35mm below top of slab complete all as specified and directed.

M&L for Preparation old painted concrete/bituminous pavement surfaces and Painting lines, dashes, arrows, letters etc., exceeding 10 cm width or girth and applying road marking paint white or golden yellow colour all as specified and directed

Removal of excavated/demolished materials out side MD land to a distance exceeding 5KM and not exceeding 10.00 KM and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed.

Taking down carefully any type of point wiring and description and removing the un serviceable material out of site including seperating the serviciable fitting/ fixtures of light / socket / switch etc complete all as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made of MS Sheet of suitable size as recommended by manufacturer and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified. Note : Wherever point wiring is to be provided over concrete surface like ceiling/Columns/ Beams etc., the point wiring shall be provided with PVC conduit.

All as per item No. 105 here-in-above but for one light point controlled by 2 way switch

All as per Item No. 105 here- in- above, but for 5 pin 6/16amps socket outlet independently, with 1100 Volts, FRLS Grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 and including 1100 Volts, FRLS Grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

S& F switch modular type 6 amp 240 volts single pole one module complete all as specified and directed.

S & F Switch, Modular Type, One Module, Single Pole, two Way, 6 Amps, 240 Volts complete all as specified and as directed.

Material and Labour switch modular type 16 amp 240 volts one module, single pole complete all as specified and directed.

Material and Labour for modular type socket multipurpose 6/16 amps 2/3 pin two module complete all as specified and directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, One Module, 100 W, AC, 230 Volts, Single Pole complete including removing old regulator any type all as specified and as directed.

S & F Ceiling Rose, PVC/ Polycarbonate,Isolated body, Three Terminals, 230 Volts complete all as specified and as directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated triple pole & Neutral 12 way 415 volts, three phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old DB complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated triple pole & Neutral 6 way 415 volts, three phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old DB complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated triple pole & Neutral 4 way 415 volts, three phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old DB complete all as specified and directed.

Supply and fix Double pole sheet matel enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp Capacity including taking down of old enclosure complete all as specified and directed.

S&F of MCB , TPN, 240 Volts, 'C' series, breaking capacity 10 KA of rating 100 Amps complete all as specified and as directed.

S&F of MCB , TPN, 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed.

S&F of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 40Amps complete all as specified and as directed.

S&F of MCB DP 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed.

S&F of MCB TP 240 Volts, 'C' series, breaking capacity 10 KA of rating 40Amps complete all as specified and as directed.

S&F of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6 to 32Amps complete all as specified and as directed.

M & L for Sub main wiring with 4 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non metallic rigid conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including two run of 10 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor including taking down existing wiring complete all as specified and as directed. Note: 6 runs of 10 Sq.mm & one run of PVC conduit accessories will be measured as RM.

M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non metallic rigid conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of PVC conduit accessories will be measured as RM.

M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts with colour code , FRLS Grade, ISI Marked, drawn through and including PVC conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of PVC conduit accessories will be measured as one RM.

Supply & Fix multi core round sheathed 6 Sqmm copper conductor flexible industrail cable 1100 volt conforming to IS 694, FR PVC sheathed cable with multi stranded copper conductor ISI marked and drawn for AC out door units cable green in colour as continuous earth continuity conductor and connecting to earth dolly complete all as directed.

Taking down ceiling fan of any make & sweep dismantling ,cleaning, greasing/overhauling, adjustament of down rod and provision of new canopy, clamp, rubber reel and refixing to its existing place including painting and marking MES number of the same all as specified and connections with new flexible cable complete all as directed.

Taking down old Exhaust fan upto 400mm sweep and refixing to its existing place including painting and marking MES number of the same all as specified and connections with new flexible copper cable complete all as directed.

Earthing complete with galavanised steel plate electrode 600x600x6 mm thick buried directly in ground vertically ( earth pit to a depth of not less than 2.25 meter deep below ground level) with the tope edge of earth place at a depth of not less than 1.5 meter below normal ground level connected to GI earth lead of 4.0mm dia, by means of bolts & nuts connected to earthing test point all as shown in elecrical plate No-5 of SSR Part -1 of 2009 specified or indicated and testing on completion including excavation / earth work in any type of starta PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1 : 2 : 4) type B1, Reinforced with welded steel wire fabric (XPM) weight not less than 4 KG /sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medioum grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete all as specified. Note: Quoted rate deemed to include the cost of excavation and earth work, PCC pit, funnel and cover etc.

Material and Labour in repair 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to pole or any other indicated situation for loop earthing etc. as required complete and all as specified and directed.

S & F Recess mounted full panel LED luminaire 35/36 watt fitting 2'x2' with white powder coated housing & frame in CRCA sheet, high effiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED colour temparature - 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temparature - 0 to 50 Deg C, Driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, Multistage isolated constant current, Constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level< 60V DC as per IEC standard complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver twin core flexible copper conductor cases of suitable size complete all as specified and directed

S & F LED batten Luminaire not less than 22 Watt fitting 4' long with white powder coated housing & frame in CRCA sheet, High efficiency LED grade diffuser, eletronic driver duly wired upto terminal block, CRI>80, LED colour temparature - 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temparature - 0 to 50 Deg C, Driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, Multistage isolated constant current, Constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level< 60V DC as per IEC standard including batten/suspension system complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Supply and Fix LED recess Mounting square down light, 18Watt, 210x210mm, 230V TDH ≤ 20% CCT 5700K, CRI ≥80 system lumens out put complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed.

Supply and fix at the place as directed LED flood light fitting 180 watts made oute of pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection at any height in hangers/Work shops closed version with TDH ≤ 10% CCT 5700K, CRI ≥80 system lumens output 18750lm Energy saving, environment friendly & aluminium alloy pressure die cast housing with epoxy powder coated complete and with in built surge voltage protection of 10 KV complete all as specified and as directed. Note: 1. All necessary fixing/ connecting arrangements of nut, bolt, MS rod, to be provided by the contractor with out any extra payment from department . 2. Quoated rate is to be deemed the charges of necessary boom lift.

Supply and fix LED street light 70 watts IP 66,street light with including wall mounting MS bracket and clamps complete all necessary fitting accessories and pre wired complete

Supply & Fix Modular telephone socket RJ 11 (jack type) one module cutting chasis to walls/floors/ceiling including metal box with modulure plate of one module & making surface good complete all as specified and directed

S & F in repairs LAN Outlet, RJ 45, cat 6 twisted operation computer socket outlet cutting chasis to walls/floors/ceiling including metal box UTP information outlet tool less, Modular Type, one Module, complete all as specified and as directed. Note: Only sockets will be provided by MES

Supply & fix 15mm dia low density polyethylene pipes rating 6kgs/cm2 for inserting of telephone & lan wires in wall/ceiling/floor with all necessary fittings concealed / surface with required clamps to fit in ceiling all as specified and directed

Supply & fix 20mm dia low density polyethylene pipes rating 6kgs/cm2 for inserting of telephone & lan wires in wall/ceiling/floor with all necessary fittings concealed / surface with required clamps to fit in ceiling all as specified and directed

Supply & fix 32mm dia low density polyethylene pipes rating 6kgs/cm2 for inserting of telephone & lan wires in wall/ceiling/floor with all necessary fittings concealed / surface with required clamps to fit in ceiling all as specified and directed

Supply & fix 50mm dia low density polyethylene pipes rating 6kgs/cm2 for inserting of telephone & lan wires in wall/ceiling/floor with all necessary fittings concealed / surface with required clamps to fit in ceiling all as specified and directed

C R R CONSTRUCTIONS