Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
9 May 2025, 11:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
S AND T
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
26 conditions · 16 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Care In Submission of Tender : (In terms of Railway Board letter NO : 2017/CE-I/CT/4/GST dated : 23.06.2017)
(i) Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017 (CGST)/Integrated Goods and Services Tax Act, 2017 (IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderer will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UGST/SGST Act to railway immediately after the award of contract without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority
In case the successful tenderer is not liable to be registered under CGST/IGST/UGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority
Tender for the Balance Outdoor and Indoor Works of EI (M/s Kyosan Make) including Supply of Signalling and Telecom Materials i.c.w Replacement of signaling gears with Electronic Interlocking at SubziMandi station of Delhi division on Northern Railway
GSU_DLI_SNT_11
GSU_DLI_SNT_11
Open
Works - General
180 Days
Delhi, Delhi
₹0
₹2.4 L
9 May 2025
17 Apr 2025
47 items across 5 schedules · ₹1,35,51,954.11 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as per drg.No.(NR/S&T/CON/1. 1/97-A) so as not to form a drain, 0.3 Mtrs. Wide & 1 Mtr. deep on both side ofthe station alongside the track. It shall conform to the safe distance as per signalling and cable plan. It also includesclearance of routes of trees & bushes. Lesser/deeper depth for more number of cables will be paidproportionately. (Inspection: Site Incharge) | Metre | 2000.00 | 84.68 | 1,69,360 |
| 2 | Excavating and refilling of trench 0.3 Mtr. Wide and 0.8 Mtr. Deep on pitched/Stone/bricks pavedsurface, road crossing/platform etc. and restoring the surface to its original conditions. Lesser depth of the trench isto be paid proportionately. (Inspection: Site Incharge) | Metre | 800.00 | 132.47 | 1,05,976 |
| 3 | Supply and laying of 2nd class bricks in the trench and laying as per drg. No. (NR/S&T/CON/1.1/97 A) as per instructions of the site Engineer. Per unit means per brick. (Inspection: Site Incharge) | Per Unit | 16000.00 | 9.01 | 1,44,160 |
| 4 | All work of horizontal boring and trenchless cabling along with supply,transpotation and insertion of double wall corrugated pipe -( ISI marked ) conforming to RDSO Spec no. RDSO/SPN/204/2011 or latest, and thelaying of cable in the boring under the track / road etc as per instruction of site engg. by using pipe of size 120 mm outer dia, 103.5 mm inner dia in which required number of cables to be crossed. The depth of horizontal boring should be minimum 1.0 m from rail flange/road level. (Inspection : RITES for DWC pipe and Site Incharge for SiteWork. ) | Metre | 600.00 | 2,193.61 | 13,16,166 |
| 5 | Boring and trenchless cabling along with supply andinsertion of HDPE self lubricated pipes of 90 mm nominal dia(DN) with material classification as PE -80and nominal presserPN- 6 as per IS:4984-95 (with latest amendmennts) in the bore for the laying of signaling/ telecom/power cables under thetrack/road.Depth of Horizontal boring should be minimum 1500mm from bottom of rail flange /road level (Cable laying is coverd separately)(.(Inspection: RITES for HDPE pipe and Site Incharge for execution) ) | Metre | 500.00 | 1,911.76 | 9,55,880 |
| 6 | Supply & laying of RCC pipe including split pipe where required of size 150 mm inner dia, 2meter long with collar ( or ring at joints) as per latest IS spec. No. 458 -1988 (with latest amendments) in trenchacross the track / road & L-xing gates etc. as per Drg. No. NR/S&T/ CON/1.2/ 97 and as per instructionsof site engineer. (Inspection :Consignee/Site Engg./RITES) | Metre | 200.00 | 513.34 | 1,02,668 |
| 7 | Supply and fixing of G.I. pipe 75mm dia, 3mm thick perforated at a distance of 20 cm or less ofrequired length at culverts/ bridges/along the cuttings, suitably concreted at both ends as per drg. No.(NR/S&T/CON/1.4/97). G.I. clamps of M.S. flats bolts & nuts, cement, sand etc to be supplied by thecontractor. (Inspection: Consignee/Site Incharge/RITES) | Metre | 150.00 | 942.76 | 1,41,414 |
| 8 | Laying of signalling/Telecom/power cables of different sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by Railways. Meggering of cable before andafter its laying of all type of outdoor cables. (Inspection: Site Incharge) | Metre | 80000.00 | 9.68 | 7,74,400 |
| 9 | Testing & meggering of all types of outdoor cables after its laying and termination on both ends under supervision of Railway representative. This also includes preparation of test report for core to core and coreto earth on prescribed proforma for each core of the cable separately after termination of cable. This also includesdressing & lacing of cable on both ends. Performa for testing & material for lacing to be supplied by thecontractor. Per unit means per core. (Inspection: Site Incharge) | Per Unit | 4000.00 | 15.64 | 62,560 |
| 10 | Supply and installation of RFID Electronic Marker for S&T underground cable with programmable memory chip, later recordable by electronic marker locator during locating for saving the user specific data inside the RFID electronic marker memory chip which can be buried to depth of 5 ft. Placing in trench. (Inspection by RITES for supply part.) | Numbers | 100.00 | 2,796.06 | 2,79,606 |
| 11 | Supply and testing of electronic Cable Route Locator/Tracer equipment capable of tracing electronic markers and different types of underground signalling/ electrical cables of make: 3M Dynatel Model-2273M-iD/C-scope/ Stanlay or similar. (i) Cable avoidance tool DXL2 digital under ground cable & pipe locating receiver and cable avoidance tool. (ii) SGV2 signal generator. (iii) Signal lamp accessory ST-SC. (iv)Carry bag ST-CB or similar.(Inspection by RITES). | Numbers | 1.00 | 4,78,460.64 | 4,78,460.64 |
| Schedule total | ₹45,30,650.64 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .