Providing and installation of Fire Fighting System at Police Station at Sector 17, U.T., Chandigarh

providing and fixing in position cement concrete of specified grade excluding the cost of centring and shutring -All work up to plinth level . DSR 4.1

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size DSR 4.1.3

Centring and shuttring including strutting , proping etc. and removel of form DSR 5.9

suspended floor ,roofs , landings , Balconies and Access platform DSR 5.9.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in DSR 6.1

Cement mortar 1:6 (1 cement : 6 coarse sand ) DSR 6.4.2

12 MM Cement plaster of mix DSR 13.1

1:4( 1 cement; 4 fine sand) DSR 13.1.1

providing and fixing G.I Pipes complete with G.I Fittings and clamps i/c cutting and making good the walls etc.(Exposed on wall). DSR 18.10

32mm dia, nominal bore : DSR 18.10.4

providing and fixing G.I Pipes Union in G.I PIPE Including cutting and threding the pipe and making long screws etc. complete DSR 18.46

32mm dia, nominal bore : DSR 18.46.1

providing and fixing gun metal gate value with c.i wheel of approved quality DSR 18.17

32mm dia, nominal bore : DSR 18.17.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR 18.48) DSR 18.48

supplying, installation testing and commissioning of Electric driven terrace pump suitable for automatic opretion and consisting of following complete in all respect as required A . Horizontol type multistage centrifugsl , end suction pump of cast iron body and bronze impeller with stainless steel shaft and flow of 450 LPM at 35 M head confirming to IS 1520 B. 7.5HP/11 KW CAGE induction moter ,tefc, suitable for opretion on 415 voltes,3 phase 50hz ac with IP 55 Protection for enclocsure, horizontal foolt mounted type with class-F "Insultion, confirming to IS-325C. M.S common fabricated base palte,coupling guard ,foundation bolts as per specifiction DSR 27.4

Electric driven terrace pump 450 lpm at 35 mm head DSR 27.4.2

Providing ,installation, testing and commisioning of 'c' CLASS HAEVY DUTY MS PIPE confirming to is 1239/3589 ( all pipes shall be ISI marked and shell be one of approved makes) including fitting like elbow.tees,flanges,tapers,nut bolts, gaskets etc.fixing the pipe on wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as per specification and as required , DSR 27.7

100 mm DSR 27.7.7

Providing ,fixing, testing and commisioning of BUTTER FLY VALUE of PN;1.6 with SS Disc and stem with nuts ,bolts,washers and gaskets confirming to IS 13095 Complete of following sizes as required DSR 27.11

100 mm dia DSR 27.11.5

Providing ,fixing, testing and commisining of DUAL PLATE NON RETURN VALUE of PN.1:6 Of following sizes compete with rubbe gasket, G.I Bolts ,nuts and washers etc: DSR 27.14

100 mm DSR 27.14.5

Supplying and fixing SINGLE HEADED INTERNAL HYDRANT VALVE with instantaneous stainless steel coupling of 63mm dia with cast iron wheel ISI marked confirmming to IS 5290 (TYPE-A) With blank gun metal /Stianless steel cap and chain as reqiured : DSR 27.10

Single headed Stainless steel DSR 27.10.2

Providing , fixing and testing of 63 mm Dia ,15 mtr Long RRL HOSE PIPE WITH 63 mm dia Male and Female Gun Metal / Stainless steel (SS) Wire,Rivets etc. confirming to IS 636 ( Type-A) AS Required make: newage / minimax/omex /safeguard . DSR 27.16

15 mtr long rrl hose pipe with 63 mm dia male and female GUN METAL DSR 27.16.1

Providing ,fixing and testing of FIRST AID HOSE REEL fabricated out of MS sheet ,spray painted in post office red,confirming to IS 884 With upto date amendants complete with the following as required : DSR 27.17

(a) 30mtr Long 20mm (nominal internal dia water hose Thermoplastic ( textile reinforecd ) TYPE -2 AS Per IS 12585 DSR 27.17.1

(B) 20MM (Nominal internal dia) gun metal /stainless steel globe value and nozzle.

(C) Drum and barckets for fixing the equipments on wall.

(d) connections from riser with 25mm dia stop /ball value ( gun metal/stinless steel),M.S PIPE and including pressure reducing value

Providing and fixing, testing of 63mm dia STAINLESS STEEL BRANCH PIPE With 20mm (Nominal internal diameter) Size of nozzel confirming to IS 903, suitable for intaneous connection to interconnect hase pipe coupling as required . DSR 27.18

Branch pipe with 20mm dia gun metal DSR 27.18.1

Providing and fixing ,testing of FIRE BRIDGE INLET CONNECTION of cast iron body with 4 nos. Gun metal / satinless steel male instantaneous inlet .coupling complete with cap and chaoin as required for 100mm dia ms pipe connection ,confirming to IS 904 As required .Make: newage /minimax /omex /safegurd. DSR 27.19

2 way fire bridge inlet connection 100 mm pipe DSR 27.19.1

Providing and fixing HOSE CABINAT of size (600mm*600*450mm) made of 16 gauge MS Sheet with glazed glass door i/c necessory locking arrangmrnt suitable to accommodate 15mtr long hose pipe and raised branch pipe mounted on wall or raised bric platform and duty painted with post office red externally and white internally with syntehtic enamel paint complete in all respect as required .

Hose Cabinat size (600mm*600mm*450mm)

Providing and fixing of ABC (Power type) ABC FIRE EXTINGUISHER/ 4KG HP mild steel cylinders ISI marked approved fitted with pressure indicating gauge capacity complete with discharge horn and mounting it on the wall with a suitable MS bracket 9INCLUDING S/F bracket) minor civil works etc complete as required.

4kg ,ABC Fire extinguishers

Supplying and installing of 3 nos set of fire buckets of 24 gauge galvanized steel sheet , standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters "fire" in black and gold.

Fire bucket 3 no's set

Supplying and fixing carbon -di-oxide fire extinguishers consisting of welded M.S Cylindrical body, squeenze lever dischage value fitted with internal discharge tube, DISCHARGE NOZZLE SUSPENSION BRACKET, CONFIRMIMG to IS 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fastenrs complete with internal charge. capacity 4.5 kg. ISI MARKED.

Carbon -di-oxide fire extinguishers

supplying ,laying ,testing and commissioning of MS made cubicle panel made out of 1.6mm CRCA sheet powder coated with siemens colour ,the panel is design for wall mointing type with cable incoming and out goings from bottom. MCB TP 32A,CONTRACTOR MNX-12A, over load relay 4,5-7 5A ON/OFF Indection , STOP/ START push button,Auto/mannual switch terminal strip MBC 1 POLE 6amp,aux,cont,SDS TIMER,SPPR ,ENCLOUSE And Accessories fabrication in 1.6mm crca sheet powder coating in slemens gray shade 75*40mm channel base frame cable entry will be TOP AND BOTTOM Suitable for cable lock rubber, gasket,hardware etc wiring and accessories power and control wiring will be (ISI 1100V) Flamo smoke FRLS PVC Singte core copper wire ,cooper lugs,PVC STEEVE ,FERRULS number ,hardware and Lbour etc including starter suitable for 7.5 Hp morter

Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC

3.5 Core x 25 Sqmm

2C x 1.5 Sqmm

Supplying & fixing of Battery Operated Auto Glow LED Exit signs Board of size 18''*6"" complete in al respect ( Extra payment will be made if electrical point required).

LED Exit signs Board of size 18''*6"" complete in al respect

Providing and fixing of air vessel of the following specification fabricated with MS PIPE of thickness specified.

specification

a. Diameter : 250 mm

b. Shell Thickness : 6mm

c. Dish Ends : 8mm

d.Height :1200mm

e. Finishing : two caots of red enemal paint over primer out side and two caots of epoxy caoting caoting inside.

f. Matrial of construction : M.S

g. Test pressure: 20kg/sq.cm.

h. Height of supporting legs : 400mm

I. Quantity

Air vessal above following specification .

providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station Dial type pressure gauge with isolation caok

Providing and fixing of cover for all terrace pumps made up of corrugated pvc fiber sheet with 35*35*5 MS Angel frame with openable door having lockable facility and painting the ms angel with 1 caot of red oxide primer and 2 caot of black enemal paint complete in all respects.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. DSR 18.22

Please Enable Macros to View BoQ information