SPL REPAIR TO BLDG NO. P-163 (COVERED SHED FOR 2.5 TON) OF ENGR REGT AT LMS.

Amount

Schedule 'A'

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

Ditto all as per Sl item No. 2.00 here-in-above but except brick complete all as specified and directed. (NOTE: Seviceable brick obtained from demolition under Sl item No 1.00 here-in-above shall be reused under the item)

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed. Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account. (iii) Using Dimapur sand for plastering.

Supply only intergral water proofing compound complete all as specified and directed

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. (Using dimapur sand)

M & L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. (Using dimapur sand)

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of surfaces plastered or unplastered new surface on wall and applying three coats of white washing complete all as specified and directed.

M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all as specified and directed.

Demolition Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Removing building materials etc. to a distance of 400m, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

M & L for 100 mm thick cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as using in mass concrete finishing cement concrete surfaces even and smooth without using extra cement , including waterproof topping 15 mm thickness as specified (incorporating an approved metallic floor hardner) laid on concrete floors and pavings using metalic hardner @ 5% by wt of cement complete all as specified and directed. Note: Metallic floor hardener will be measured and paid separately)

Supply only Metallic floor hardener complete all as specified and directed (Make: STP/ fosroc/ SIKA )

M&L for finished concrete surface by making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ (UV resistant polysulphide sealent of make STP limited) complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' (UV resistant polysulphide sealent of make STP limited) complete all as specified and directed.

M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' (UV resistant polysulphide sealent of make STP limited) complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frame, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including pintel hinges,stops,sliding bolt,monkey bolt etc complete all as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to distance 50 mtrs complete all as specified and directed

M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Material only for applying one coat of bitumen primer confirming to IS - 3384@ 1.20 Kg/Sqm complete all as specified and directed.

Labour only for applying one coat of bitumen primer on finished plastered surface complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing not less than 3.50kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) laying on primed surface using torch application, overlaping shall be miniumum 75mm in transverse and 100mm in longitudnal direction complete all as specified and directed.

M&L for one coat of Aluminium paint over APP based polymeric membrane or surfaces of any description , over 10 cm width or girth not otherwise described all as specified and directed.

Taking up or down 15mm dia of steel/ CPVC tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Taking up or down 20mm dia of steel/ CPVC tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.

Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.

Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm pvc rigid conduit all fixing accessories and suitable including 1.6 mm thick size sunk MS pressed steel terminal modular box for mounting modular switches,sockets and regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light/fan point controlled by one, one way switch

One socket outlet 5 Amps 5 pin on independent board

One socket outlet 5 Amps 3 pin on same board with other switch

All as per item No. 42.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand insulator copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

Supply and fixing modular Socket 6/16 , 2/3 pin combined 2 module complete all as specified and directed.

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.

S&F Sheet metal enclousre(for DB's when MCB to be used) single pole and neutral double door with rated bus bar 200 Amps, 4way, 240 Volts without MCB complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

Taking down / dismantling old unserviceable LED tube light fittings complete all as specified and directed.

S&F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable service cable including batten/suspending wires complete all as specified and directed.

S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.

S&F LED flood light 70 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and incl eassy to instl with base plate connection complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)

L BINOD CONSTRUCTION CO (BID ID -3407608)

SUBHASH CHAND GUPTA (BID ID -3404883)

M/S BIJOYA LAXMI ENTERPRISE (BID ID -3407567)

Ms SATISH CHAND AGARWAL (BID ID -3404768)

MANI PRASAD GUPTA (BID ID -3407005)