752781 ADDN ALTN CUM SPECIAL RAPAIRS TO OTHER THAN MD OTM ACCN OF 300 COMPANY ASC SUP TYPE A AND CERTAIN OTHER UNITS OF NAMKUM

Amount

SCHEDULE "A" :

Item No 01:- Dismantling of AC/CGI corrugated or semi corrugated sheet roof covering complete all as specified and directed.

Item No 02:-Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and directed.

Item No 03:-Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Item No 04 : Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Item No 05 : Dismantling framed trusses incl. cutting rivets, welding, nut & bolt and erection/ refixing by reusing the same members/ section of mild steel work of roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing any description for roof truss in same or other location including cutting, welding, refebrication etc complete all as specified and directed by EIC.

Item No 06 : S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified and directed.

Item No. 07 :- M&L for MS flat iron as in wind ties or similar work conforming to Fe-290 Gde E-165 including cutting, drilling, bolting or riveting etc. complete all as specified and directed.

Item No. 08 :- M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Item No. 09 :- M&L for Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No. 10:- M&L for Pre-painted galvalume zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No. 11 :- M&L for 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixedwith L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 120 gm/Sqm complete all as specified and directed.

Item No. 12 :- All as per Item No 11 above but fixing only.

Item No. 13:- M&L for 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gm/Sqm, welded or soldered joints are provided complete all as specified and directed.

Item No. 14:- M&L for Cast iron work grade FG 150, machined, in pulleys and similar articles complete all as specified and directed.

Item No. 15:- M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W(GdeE- 250) quality, complete all as specified and directed.

Item No. 16:- S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts clamps hold fasts; wall ties hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Item No. 17:- Fixing only Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.

Item No 18:-Dismantling wall and ceilling board any thickness including cover fillet complete all as specified and directed.

Item No. 19:- M&L for Anodised aluminium snap grid frame work of size 605x605mm, using main and cross tee of size 36.5mm x 25mm x 1.4mm, weighing 0.24 kg/RM and 23.5mm x 36.4mm x 1.4mm weighing 0.191kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm weighing 0.36kg/Rm. the snap grid shall be fixed to ceilling supporting hangers consisting of 4 mm dia MS wire, J bolts, nuts and washers as per manufacturer's complete all as specified and directed.

Item No 20:-M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Item No. 21 :- Demolition of cement concrete in ground floor or paving not exc 15 cm thick(below or above Ground Level) complete all as specified and directed.

Item No 22 :- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

Item No 23 : M&L for 10 mm thick vitrified ceramic tiles, double charged in floors, area of each tile not exc 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Item No 24 : M&L for 10 mm thick vitrified ceramic tiles, double charged in riser of steps, skirting, dado, area of each tile not exc 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick screeding in CM 1:3 complete all as specified and directed.

Item No 25 : - M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exc 0.36 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match, over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Item No 26 : - M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exc 0.36 sqm in riser of steps, skirting, dado etc set & jointed in neat cement slurry and pointed with white or coloured cement to match, over and incl 10mm thick screeding in CM 1:3 complete all as specified and directed.

Item No. 27:- M&L for glazed ceramic coloured tiles 450 x 300 x 7 to 8 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and direct. Note- The size of tiles (except thickness) may be varied during execution without any price adjustment

Item No 28 : - M&L for non skid ceramic coloured tiles 300 x 300 x 7 mm thick in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match, over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Item No. 29 - M&L Machine cut Kota stone slab flooring 22-25mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, and polishing incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Item No 30 : - M&L for chequered cement concrete tiles 300 x 300 x 25 mm thick in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and incl 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Item No 31 : M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in levelling course, coping, window cill etc. complete all as specified and directed.

Item No. 32 :- M&L for 40mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor incl finishing the top surface even and smooth without using extra cement complete all as specified and directed.

Item No. 33 :- S&F 3mm thick 38mm wide glass dividing strips complete all as specified and directed.

Item No. 34 :- M&L for 100mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in hard standing finished even and fair complete all as specified and directed.

Item No 35 :- M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finished even & smooth without using extra cement laid in bays with 6mm thick construction joints filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete all as specified and directed.

Item No 36 :.Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No. 37 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Item No. 38 :- M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No. 39 :- all as per Item No 38 but except bricks complete all as specified and directed.

Item No. 40 :- M&L for Brick work using old size bricks with sub class 'B' bricks straight or curved on plan built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

Item No 41 : M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml /50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Item No 42 : M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed

Item No 43 - Supply only liquid water proofing compound, ISI marked.

Item No 44:- M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Item No 45 & 46:- BLANK

Item No 47:- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Item No 48 :- Demolition of reinforcement cement concrete above ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

Item No. 49 :- M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in shelves and similar work incl form work complete all as specified and directed. Note - Reinforcement shall be measured and paid separately.

Item No. 50 :- M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 51 :- Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Item No. 52 :- Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Item No. 53 :- S&F galvanised steel water tubing medium grade with & including all fittings (ISI marked), 15 mm bore, fixed on/ concealed in walls, laid in floor, ceiling, etc, complete all as specified and directed. .

Item No. 54 :- S&F galvanised steel water tubing medium grade with & including all fittings (ISI marked), 20 mm bore, fixed on/ concealed in walls, laid in floor, ceiling, etc, complete all as specified and directed. .

Item No. 55 :- Fixing only galvanised steel water tubing with & including all fittings (ISI marked), 15 mm bore, fixed on/ concealed in walls, laid in floor, ceiling, etc, complete all as specified and directed.

Item No. 56 :- Fixing only galvanised steel water tubing with & including all fittings (ISI marked), 20 mm bore, fixed on/ concealed in walls, laid in floor, ceiling, etc, complete all as specified and directed.

Item No. 57 :- S&F in repair bib tap 15 mm bore, chromium plated, fancy type long shank with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Item No. 58 :- S&F bib tap 15 mm bore, chromium plated, fancy type long shank with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Item No. 59 :- S&F in repair stop valve 15 mm bore, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Item No. 60 :- S&F stop valve concealed type, 15 mm bore, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Item No. 61 :- S&F in repairs pillar tap cast cooper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" pressure with long screwed shanks & fly nuts screwed for iron pipe etc. complete all as specified and as directed.

Item No. 62 :- S&F pillar tap cast cooper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" pressure with long screwed shanks & fly nuts screwed for iron pipe etc. complete all as specified and as directed.

Item No. 63 :- S&F in repair brass chromium plated shower rose 125 mm size fancy type with or without swivel joint fixed to iron pipe etc complete all as specified and directed.

Item No. 64 :- S&F brass chromium plated shower rose 125 mm size fancy type with or without swivel joint fixed to iron pipe etc complete all as specified and directed.

Item No. 65 :- S&F Plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Item No. 66 :- S&F Vitreous china Urinal, Half stall type, white, with grating and union for discharge pipe including 15 mm bore chromium plated Push tap, 450mm PVC connector, coupling and waste pipe complete all as specified and directed.

Item No. 67 :- S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x400 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and directed.

Item No. 68 :- S&F vitreous china squating pan 'Orissa' pattern WC size 580x400 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and directed.

Item No. 69 :- S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

Item No. 70 :- S&F vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

Item No. 71 :- S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. Make: Prayag

Item No. 72 :- S&F PVC connection 15mm dia size and 600 mm long with 2 Nos check nuts its washers complete all as specified and as directed. Make: Prayag

Item No. 73 :- S&F in repair 10 Ltr capacity PVC valveless symphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and as directed.

Item No. 74 :- S& F CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.

Item No. 75 :- S&F 32mm bore waste coupling of PTMT (half or full threaded) min wt 45gm complete all as specified and directed.

Item No. 76 :- S & F 32mm bore low density polyethylene (LDPE) pipe of pressure rating 6kgf/sqcm complete all as specified and directed.

Item No. 77 :- S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia oultelt complete all as specified and directed.

Item No. 78 :- Dismatling water tanks of capacity exc 500 and n exc 1000 ltrs all as specified and directed.

Item No. 78A :- S & F rotational moulded polyethylene triple layer water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed.

Item No. 79 :- Dismatling water tanks of capacity exc 250 and n exc 500 ltrs all as specified and directed.

Item No. 79A :- S & F rotational moulded polyethylene triple layer water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Item No. 80 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both, screwed both ends for iron pipe complete.

Item No. 81 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both, screwed both ends for iron pipe complete.

Item No. 82 :- S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

Item No. 84 :- S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

Item No. 85 :- S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed.

Item No. 86 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 87:- S&F PVC (SWR) vent cowl of 110 mm bore complete all as specified and directed.

Item No. 88:- S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Item No 89 - Taking down chowkats or frames with shutters not exc 1.5 Sqm each (with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 90 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No.91 :- S&F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock complete all as specified and directed.

Item No.92 :- S&F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock complete all as specified and directed.

Item No 93 : M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

Item No. 94 - S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No. 95 :- BLANK

Item No. 96 :- S&F 1.25 mm thick Mild steel, corrugated, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Item No. 97 :- S&F steel windows with side hung shutters incl projecting type hinges with steel handle, and two nos. MS tower bolts 150mm long complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed.

Item No. 98 :- S&F steel windows with side hung shutters incl projecting type hinges with steel handle, and two nos. MS tower bolts 150mm long complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed.

Item No. 99 :- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No. 100 :- S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Item No. 101:- S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Item No. 102 :- S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified.

Item No. 103 :- S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and directed.

Item No. 104 :- S&F Cast brass Fanlight pivot with plate size 25mmx 65mm and suitable for shutter of 35mm thickness and fixed complete all as specified and directed.

Item No. 105 :- S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

Item No. 106 :- S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Item No. 107 :- S&F 5 mm thick plain/tined sheet glass in squares exc 0.5 sqm in each pane fixed to aluminum frame work complete all as specified and directed.

Item No. 108 :- S&F 5 mm thick plain/tined sheet glass in squares not exc 0.5 sqm in each pane fixed to aluminum frame work complete all as specified and directed.

Item No. 109 :- S&F 4 lever brass Mortice lock,vertical type, size 65 mm complete all as specified and directed.

Item No 110 :- Blank

Item No 111 : Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Item No. 112 : S & F Solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed.

Item No. 113 : S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.

Item No. 114 :- S&F in repair 18/19 mm thick prelaminated particle board of exterior grade one side decorative and other side balancing white complete all as specified and directed.

Item No. 115 :- M&L 1st class hard wood Beads, straight (any size) for glazed or gauzed joinery,renewed, including mitres etc.and removing old beads to Store complete all as specified and directed.

Item No. 116 :- S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright complete all as specified and directed.

Item No. 117 :- S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Item No. 118 :- S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

Item No. 119 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.

Item No. 120 :- S&F aluminium anodised, barrel tower bolts of extruded section 200 mm long, dia of bolt 12mm complete all as specified and directed.

Item No. 121 :- S&F extruded aluminium alloy handles fabricated type anodised of 125 mm size, complete all as specified and directed.

Item No. 122 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt & 16mm dia complete all as specified and directed.

Item No. 123 :- S&F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Item No. 124 :- S&F in repair galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Item No. 125 :- Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

Item No. 126 :- S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Item No. 127 :- M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

Item No. 128 :- M&L for applying three coats of white wash(lime) on newly plaster surface of wall complete all as specified and directed.

Item No. 129 :- M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Item No. 130 :- M&L for preparing newly plaster surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Item No. 131 :- M&L Preparing old wooden surfaces exceeding 10CM in width or girth and applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 132 :- M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 133 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 134 :- M&L Preparing old steel surfaces exceeding 10CM in width or girth and applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 135 :- M&L form work to sofit and sides of lintel, beam, chajja etc complete all as specified and directed.

Item No. 136 :- M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintel, beam, chajja etc complete all as specified and directed.

Item No. 137 :- S&F Mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 138 :- S&F Mild Steel TMT bar 8mm dia as in stirrups, cut to length, bent to shape required including hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 139 :- Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Item No. 140 :- S&F Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and directed.

Item No. 141 :- Excavation in trenches not exc 1.5m wide and not exc 1.5m depth incl getting out in any type of soil complete all as specified and directed.

Item No. 142 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed.

Item No. 143 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 144 :- Blank

Item No. 145 :- M&L for DPC in cement concrete 1:2:4, type B-0, 40mm thick to horizontal or vertical surface including necessary formwork complete all as specified and as directed.

Item No. 146 :- S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) including fixing bolts & excluding flushing cistern and flush pipe complete all as specified and as directed.

Item No. 147 :- S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed.

Item No. 148 :- S&F brass toilet paper holder fixed to wall with plugs and brass CP screws complete all as specified and directed. Make: Jaquar or equivalent as approved by GE.

Item No. 149 :- S&F in repair brass chromium plated soap dish, of 150 x 150 mm size fixed to wall with plugs and brass CP screws complete all as specified and directed. Make: Jaquar or equivalent as approved by GE.

Item No. 150 :- S&F 15mm bore chromium plated nozzel for RO connection as approved by GE complete all as specified and directed.

Item No. 151 :- S&F in repair angle cock 15 mm bore brass chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

Item No. 152 :- S&F brass CP Mixer for basin mixing for hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.

Item No. 153 :- M&L PCC 1:2:4 type B1 using 20mm graded stone aggregates in bed block complete all as specified and directed.

Item No. 154 :- Excavation over area not exc 1.5m depth incl getting out in any type of soil complete all as specified and directed.

Item No. 155 :- Excavation over area not depth exc 1.5m depth but not exc. 3M in depth incl getting out in any type of soil complete all as specified and directed.

Item No. 156 :- Removal of excavated materials to a distance exceeding 250 m & not exc 500 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No 157:- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete for manholes complete all as specified and directed.

Item No 158:- M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping incl necessary form work complete all as specified and directed.

Item No. 159 :- M&L for laying ultra plus PE, DWCPE(doble wall corrugated) conforming to IS 16098 (Part-2):2013pertaing to structural wall plastic pinning system for non pressure drainage and sewerage, 150mm bore pipe & fittings with non smooth surface, type B complete all as specified and directed

Item No. 160 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No 161:- M&L for Precast Cement concrete 1:2:4 type B1 as in landing, cover slab for manholes etc set in CM 1:4 incl necessary form work complete all as specified and directed.

Item No. 162 : M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and finished even and smooth with out using extra cement complete all as specified and directed

Item No 163:-- M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel and drains complete all as specified and directed.

Item No. 164 :- M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Item No. 165 :- Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick(Horizontal or sloping) for fair finish surface of concrete complete all as specified and directed.

Item No. 166 :- M&L for RCC M-25(design mix) using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Item No. 167 : M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 mixed with water proofing compound as per manufacture's instruction and finished even and smooth using extra cementcomplete all as specified and directed. Note: WPC shall be paid seperatel as supply only

Item No. 168 :- S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

Item No. 169 : S&F PVC (SWR) 110 mm dia junction single(single T) equal or unequal complete all as specified and directed.

Item No. 170 :- M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.

Item No. 171 :- M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Item No. 172 :- Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finish surface of concrete complete all as specified and directed.

Item No. 173 :- M&L for RCC M-30(design mix) using 20mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Item No. 174 :- Use & waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

Item No. 175 :- M&L for RCC M-30(design mix) using 20mm graded stone aggregates as in Walls, retaining walls,asement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Item No. 176 :- M&L for RCC M-30(design mix) using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Item No. 177 : M&L for rendering on concrete surface in ceiling 10mm thick in CM 1:4 finished even and smooth without using extra cementcomplete all as specified and directed.

Item No 178 & 179 BLANK

INTERNAL ELECTRIFICATION

Item No. 180 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Item No. 181 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed.

Item No. 182 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials from site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No. 183 :- Taking down carefully existing gysers of any capacity after disconnecting all necessary electric and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 184 :- Taking down existing ceiling/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 185 :- M&L for point wiring with multistranded copper conductor 1.5 Sq mm (nominal area), PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunk in anodized pressed steel box 1.6mm thick, 60mm deep for housing switch socket etc with white laminated 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(e) One bell point controlled by one, bell push 5 Amps

Item No. 186 :- All as per item No 185 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 187 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm(nominal area), single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with GI sunken boxes 1.2mm thick, 60mm deep for housing switch socket etc duly covered with modular white cover plate with inner frame suitable for modular switches including PVC insulated multi stranded copper conductor 1.5 Sq mm(nominal area) single core FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(e) One bell point controlled by one, bell push 5 Amps

Item No. 188 :- All as per item No 187 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 189 :- All as per item No 187 but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

Item No. 190:- S&F switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed.

Item No. 191:- S&F switch Piano type single pole 15/16 amp, complete all as specified and directed.

Item No. 192 :- S&F switch bell push piano type 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 193 :- S&F socket outlet 2 in 1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 194 :- S&F socket outlet multipurpose having provision for 3 pin, 15/16 amp and 3 pin, 5/6 amp, flush type complete all as specified and directed at site.

Item No. 195 :- S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fiffing complete all as specified.

Item No. 196 :- S&F stepped type electronic fan regulator flush Type complete all as specified and directed at site.

Item No. 197 :- S&F Modular switch Piano flush type, single pole, one way, 5/6 amp single module complete all as specified and directed at site.

Item No. 198:- S&F Modular switch Piano flush type, single pole, one way, 15/16 amp single module complete all as specified and directed at site.

Item No. 199 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 5/6 amp and 2 pin, 5/6 amp, 2 module piano flush type complete all as specified and directed at site.

Item No. 200 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 15/16 amp and 3 pin, 5/6 amp, 2 module piono flush type complete all as specified and directed at site.

Item No. 201 :- S&F modular step type electronic fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed at site.

Item No. 202 :- S&F Bell Push modular 6 amps single module complete all as specified and directed.

Item No. 203 :- S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.

Item No. 204 :- S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

Item No. 205 :- M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and direced. (Note:- Two runs of conductor cable, one run of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 206 :- S&F Sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.

Item No. 207 :- S&F Sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and directed.

Item No. 208 :- S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 209 :- S&F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 210:- S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 211:- S&F Metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

Item No. 212 :- S&F water heater storage type (Geyser) vertical/Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star reted, ISI marked including 04 Nos of hold fechner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed.

Item No. 213 :- Fixing only ceiling fan/exhaust fan (obtained from taking down) incl cleaning and overhauling of fan, spray painting two coats with synthetic enamel paint incl filling cavities with filler& provn of 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal complete all as specified and directed.

Item No. 214 :- S&F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL diect fir lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No. 215 :- S&F Decorative wall mounted luminaire made our of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 Watts complete all as specified and directed. Make:- Havells Cat Part No LHDLO6160099 or its equivalent in specified make.

Item No. 216 :- S&F LED 10 watts batten aluminium etruded with decorative end caps with warranty option of 5 years from date of installation complete all as specified and as directed. Make:- Bajaj Cat Part No BCLSB 10 NW or its equivalent in specified make.

Item No. 217 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting complete all as specified and directed. Make:- Bajaj Cat Part No BIBWP 10W LED or its equivalent in specified make.

Item No. 218 :- S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen etc with warranty option of 5 years from date of installation complete with all accessories internally pre-wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Bajaj Cat Part No BCLAB 20 W WH LED P, Wipro Cat Part No. LL20-281-XXX065-ALI or its equivalent in specified make.

Item No. 219 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements with warranty option of 5 years from date of installation/completion and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make :- Bajaj Cat Part No ENXT P 24L WH CR PC SD or its equivalent in specified make.

Item No. 220 :- S & F for Energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed included in quoted rate).

External ELECTRICAL SUPPLY

Item No. 221 :- Supply & laying un-reinforced precast concrete cable cover, class LV type 1 ,flat, size 250 mm x 150 mm x 40mm sizes over the HT cable for protection of cable complete all as specified and directed.

Item No. 222 :- M & L Sand cushioning to under ground cable with screened river sand unwashed and gently punning to provide require cover complete all as specified and directed.(Punned thickness will be measured and paid)

Item No. 223 :- Supply & lay GI tubing light grade in protection of cable at road crossing / hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

(a) 40 mm dia bore

(b) 25 mm dia bore

Item No. 224 :- Taking down existing old unserviceable LT UG / Service cable of any description and size and removal from site complete all as specified and directed.

Item No. 225 :- Supply, laying and testing and commisioning LT underground cable 1100 Volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi standard aluminium conductor laid in pipes, trenches/ducts, on poles etc of following size complete all as specified and directed :-

(a) 4 core X 25 Sqmm

(b) 4 core X 16 Sqmm

(c) 2 core X 10 Sqmm

Item No. 226 :- M & L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part-I including excavation and earthwork in any type of soil / strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 823046.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

M/s Deepak kumar sinha

Associated Engineers

MS SHRI B.C. DAS

Nand Lal and Sons