DRILLING OF BOREWELL AND FIXING MOTOR IN WARD NO 04 IN INDI TOWN (CAT-I RESERVED)

DRILLING OF BOREWELL AND FIXING MOTOR IN WARD NO 04 IN INDI TOWN (CAT-I RESERVED)

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG above 900 CFM above in all strata including over burden upto 20mtrs. Fixing of casing pipes, collars cap wi...

Above 50 mtr upto 100 mtr

Borewell depth of 100 to 150 Mtrs

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 part II 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum The...

Geophysical Investigation of site for sinking Borewell Geophysical Investigation of site for sinking Borewell for supplying drinking water to the habitation either through a hand pump, Mini Water Supp...

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG above 900 CFM above in all strata including over burden upto 20mtrs. Fixing of casing pipes, collars cap wi...

Above 50 mtr upto 100 mtr

Borewell depth of 100 to 150 Mtrs

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 part II 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum. Th...

Geophysical Investigation of site for sinking Borewell Geophysical Investigation of site for sinking Borewell for supplying drinking water to the habitation either through a hand pump, Mini Water Supp...

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia 4 inch suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of enginee...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984 2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

SubmersibleCable: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest ame...

Pressure Guage Supply and Delevery of brand new best make pressure guage Bourdon Type size confirming to IS 3624 87 with latest amendments with ISI mark as provided in SPD rate contract.

Supply and delivery best indegeneous brand new power capacitor as per IS 283 86 with latest amendments with ISI mark of required capacity tested and approved by one KEB aouthorities and erection. Elec...

Supply and delivery at site delivery of best indigenous brand new MCB Miniature Circuit Breakers of required capacity as per IS 88228 1978 and its latest amendments and with ISI Mark of 6 10 16 20 25 ...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundationbed etc,complete as pe...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Supply and delivery at site of brand new best make non-return valve as per IS 778 1984 with ISI Mark and as per its latest amendments 65 mm dia non return valve

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...