REPAIR AND MAINTENANCE TO JOINERY, ROOF COVERING, FALSE CEILING AND CONNECTED WORKS AT MD/OTM ACCN AT AFS DINJAN UNDER GE AF MOHANBARI

Amount

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down shutters of any description n exc 1 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkats or frame n.exc 1.5sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Refixing the shutter of any description n.exc 1 sqm in the same opening complete all as specified.

Refixing shutters of any description exc 1 sq.m and n exc 2 sq.m each in the same opening complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section,unframed work in any position including removing of unserviceable material from work site all as specified and as directed.

Material and Labour for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed.

Supply and fixing 35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars) ,edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc;size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified.complete all as specified.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided into square with plain , chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified.

Supply and fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Material and labour for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Material and labour for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified.

Supply and fixing for Steel ventilator with top hung shutter including hinges steel peg stay, steel handle complete including taking down existing old steel ventilator all as specified.

Supply and fixing rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing quality conforming to Fe-410W(Gde E 250)quality B complete all as specified.

Supply and fixing Galvanised steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Supply and fixing in repairs Galvanised steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Supply and fixing 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified.

Supply and fixing in repair 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified.

Supply and fixing Aluminium handles, cast type anodised, 150 mm long all as specified.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Material and labour for preparation of new untreated wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coat with synthetic enamel paint over a coat of pink primer including cleaning, stopping and rubbing down and removing all dropings etc. complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide primer including cleaning, stopping and rubbing down and removing all dropings etc. complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing of rubbish material from work site complete all as specified.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint of any tint/shade including washing floors, etc. , of drops and splashes complete all as specified.

Material and labour for preparation of newly plastered surfaces of walls by applying wall care white putty and sand papering surfaces to achieve smooth surfaces and applying oil bound distemper, two coats, white or any tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises outside MD land at any distance complete all as specified.

Material and labour glazed ceramic coloured (Printed) tiles, 300 mm x 200 mm x 7mm thick, in dado skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including rendering 10 mm thick in cement morter 1:4 for laying tiles complete all as specified. Note : Screed bed/Bedding layer shall not be measured and paid seperately.

Material and labour for Non skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including screed bed or bedding layer 15 mm thick in cement morter 1:4 for laying tiles complete all as specified. Note : Screed bed/Bedding layer shall not be measured and paid seperately.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but nexc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including screed bed or bedding layer 20 mm thick in cement morter 1:6 for laying tiles complete all as specified. Note : Screed bed/Bedding layer shall not be measured and paid seperately.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance complete all as specified.

Material and labour for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified.

Supplying and fixing Aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified.

Supply and fixing of 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface over metal framework including frame and reinforced with wire mesh including preparation of new POP ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified complete all as specified.

Taking down shutters of any description n exc 1 sq.m each and refixing the same after rescuring / easing complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and refixing the same after rescuring / easing complete all as specified.

Material and labour for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of cement base paint of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified.

Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of oil emulsion distemper(OBD) of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified.

Material and labour for anodised aluminium frame with powder coating of min thickness 50 micron for doors, windows,ventilators wih one or more rebates joining cleat for fixing etc complete all as specified.

Material and labour for anodised aluminium door shutter with power coating of min thickness 50 micron, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips,rubber neoprene packing, handle 4 no. in each door ,hinges, anodised aluminium snap beading screws etc. complete all as specified.

Material and labour for anodised aluminium window and ventilator shutters with power coating of min thickness 50 micron, side hung type without sash, aluminium section weighting 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing,anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long(1 no.), hinges type B-21 100 mm long(2no.), suitable handle (4 no.) complete all as specified

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified.

Supply and fixing 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with oil putty complete all as specified.

Material and labour for aluminium grill of thickness 5mm and opening not exceeding 75mm*100mm complete all as specified

Supply and fixing in repair Mortice lock , 2 lever ,vertical type , size 100mm, complete all as specified

Supply and fixing in repair Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in kitchen cabinet shutter complete all as specified.

Taking out existing aluminium frame with shutter and repair of all necessary items i.e. hinge aluminium snap beading, rubber packing, glazing clip, door closer,door closer screw etc, any type of repair and refixing the same and making good distrubed portion of wall/floor incl. complete all as specified. (note.- cost of hinge aluminiium snap beading, rubber packing, glazing clip, door closer,door closer screw ,etc are inclusive in quoted rate)

Repair/Replacement of hinges ,window stays,handles etc, welding of hinge of steel window, complete all as specified. (note- cost of hinges ,window stays,handles etc, are inclusive in quoted rate.)

Material and labour for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified.

Supply and fixing of bands, straps,hold fast etc conforming to Fe-290 Gde-E-165

S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

Dismantling of asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings including removing of unserviceable material from work site all as specified and as directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

M/s Sashi Enterprise