Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹81.0 LAccepted-AOC | L2 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L2₹85.9 LRejected-Finance | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹87.3 LRejected-Finance MAIN ROAD OBEDULLAHGUNJ RAISEN M P 464993 | OBEDULLAHGUNJ | RAISEN | MADHYA PRADESH | 464993 | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹94.9 LRejected-Finance | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹95.3 LRejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹1.1 Cr
EMD Value
₹1.8 L
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) LEH
HQ CWE (AF) Leh PIN - 194101
PROVN OF WORK SERVICES FOR COVERING OF OPEN PENS INTO SOFT PENS AND ASSOCIATED WORK AT AF STN LEH
2022_MES_541215_1
81142/E8
Open Tender
Civil Works
Item Rate
180 days
HQ CWE (AF) Leh
Please Refer Tender Documents
7 documents required · 7 mandatory
₹1,000
GE (AF) Leh
₹1.8 L
Yes
14 Sept 2022
27 Jul 2022
2 Sept 2022
27 Jul 2022
31 Aug 2022
17 Aug 2022
Amount
Excavation in over areas not exceeding 1.5m in depth and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.
Removing excavated material (rocks) a distance exceeding 250 metre but n.exc 500 metre and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
Dismantling of brick or block masonry built in any mortar, complete all as specified and directed.
Supply and fix, rolled mild steel (structural steel) in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. FE-410-W, Gde E-250, complete all as specified and directed.
Supply and fixing, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and directed.
Supply and fixing, Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 22.5cm and not exceeding 30cm complete all as specified and directed.
Supply and fix, mild steel flat iron of size 40x6mm or as directed as in wind tie for roof covering including all necessay drilling, bolting and similar work conforming to. FE-290, Gde E-165 complete all as specified and directed.
Material and labour, two coat of synthetic enamel paint on newly / perviously untreated surface over one coat of Red oxide, zinc chrome surface of any description over 10 cm in width or girth, not otherwise described.
Supply and fixing, pre-painted galvalume aluminium zinc coating mild steel corrugated sheets 0.50mm thick, having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing, pre-painted galvalume aluminium zinc coating mild steel plain sheets 0.50mm thick, having tensile strength of 550 Mpa as in ridge of roof, fixed with self tapping screws, complete all as specified and directed.
Material and labour, plain cement concrete 1:2:4 type B-1using 20mm graded crushed stone aggregate as in fixing of MS bed plate etc including necessary formwork, complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting, with power road roller 8 to 12 tonne capacity , complete all as specified and directed.
Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
Material and labour, 150mm thick Dry lean concrete (DLC) cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of floor, complete all as specified and directed.
Material and labour for cement concret 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in hard-standing/mass concrete thickness of concrete 200 mm.complete all as specified and directed.
Material and labour for Forming contraction (Dummy) joints 65 mm deep X10 mm wide primed & filled with sealing compound grade "A"complete all as specified and directed.
Material and labour, for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ , thickness of slab 200mm complete all as specified and directed.
M/S RIGDOL CONSTRUCTION
M/S KAMLA CONSTRUCTION CO.
kulwant singh govt contractor
singh traders
M/S GLOBAL ENGINEERS
ALCO ENGINEERSPVT LTD
M/S ZAHOOR AHMAD KHAN
NARINDER KUMAR SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .