Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹15.7 L+₹1.8 L (13.3%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹16.0 L+₹2.1 L (15.2%)Rejected-Finance VILLAGE POST PATHOLI AGRA UTTAR PRADESH INDIA | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹16.8 L+₹2.9 L (21.0%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹16.9 L+₹3.0 L (21.6%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹24.3 L
EMD Value
₹48,680
Closing Date
22 Jun 2022, 6:00 pmClosed
GE EAST AGRA
GE East Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt 282001
REPAIR TO WALL CEILING PANELLING TILING ROOF SHEET JOINERY AND CONNECTED ITEMS UNDER AGE BRII OF GE EAST AGRA.
2022_MES_526318_1
9451/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE EAST AGRA
₹48,680
Yes
5 Jul 2022
25 May 2022
1 Jul 2022
25 May 2022
22 Jun 2022
8 Jun 2022
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of cement concrete of any description and any position etc complete all as specified and directed.
Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.
Dismantling of wooden wall panelling incl. frame and make good the surface etc complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified and directed.
M&L 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
Supplied and fixed coloured non skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm (400 mm x 400 mm ) in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match etc complete all as specified and directed.
Ditto all as per item No.07above but in dado / skirting incl 10 mm thick cement plaster in C M 1: 4 etc complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300mmx200mmx7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mmx350mmx7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.
-Ditto- all as per item No. 11 but as in Skirting incl 10 mm thick cement plaster in C M 1: 4 etc complete all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:4 on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement etc complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement etc complete all as specified and directed.
M & L for two coats of cement base paint on new plastered surfaces of wall over one coat of alkali resistant primer including preparation of surfaces complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying 2 coats of OBD over one coat of primer complete all as specified and directed.
M&L for providing, PCC 1:3:6 Type C-1 (using 20mm graded stone aggregate) for embedding hold fasts roof kerbs benching , coping etc including necessary form work etc complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed.
S&F mild steel of joist channel, angle, Tee section, or hollow tubes (rectangle/square/round) fixed indepently without connecting plates confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed.
S&F Steel work in tubular/ square pipes as in trusses, purlin , rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 .complete all as specified and directed .
M & L Framed brackets of angles , tees , flat iron with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets incl fixing to wall etc , conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Dismantling of plain or corrugated Asbestos Cement sheeting any gauge, thickness roof coverings complete all as specified and directed.
S&F of Pre- painted galvanium aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall / sunshed fixed with self tapping screws as specified complete all as specified and directed.
S&F of Pre- painted galvanium aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws as specified complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M & L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
S&F in repair 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete complete all as specified and directed.
S&F in repair 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete complete all as specified and directed.
S&F hollow PVC Wall Lining for wall panelling consisting of 1mm thick Plain/ printed colour PVC sheet inclusive fixing with all accessories such as angle , T and Y at site as per specifications and drawing complete all as specified and directed.
S&F hollow PVC for ceiling panelling consisting of 1mm thick Plain/ printed colour PVC sheet inclusive fixing with all accessories such as angle , T , Y and U at site as per specifications and drawing complete all as specified and directed.
Supply & fixing in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified and directed.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.
Supply & fixing in repair PVC connections of 450mm long of suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified and directed.
Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, Brass CP waste coupling, complete all as specified andrected.
Supply & fixing in repair of Brass CP tubular towel rail, 60 cm long, 'D' type 20mm bore, complete all as specified and directed.
Supply & fixing in repair three layered rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified and directed.
S & F in repair ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (20mm bore dia of pipe ) complete all as specified and directed.
S&F in repair stop valve cast copper alloy high pressure fancy type chromium plated with long shank and cup (concealed type) 15mm dia complete all as specified and directed.
Supply and fixed in repair angle valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe completeall as specified and directed.
Supply & fixed in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified and directed.
Supply & fixing in repair bib tape fancy type cast copper alloy chromium plated with long shank, crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified and directed.
S&F in repairs Brass CP over head shower rose of dia n. exc 125 mm, fancy type with arm and wall flange complete all as specified and drected.
S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor complete all as specified and directed.
S & F in repairs plastic wc seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
S & F in repairs health jet faucet for pedestal pattern WC incl. flexible pipe and Brass Chcomium Plated nuts and blots and water pipe of size 1150 mm long between dia & fixed complete all as specified and drected.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12.5cm vide with chromium plated bracket guard and railing 50cm long complete all as specified and drected.
Supply & fixing in repairs C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.
Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified and directed.
Taking down chowkhats or frames with shutters (with out taking the shutters from the frame) not exc 1.5 Sqm each with shutters complete all as specified and directed.
Taking down chowkhats or frames with shutters (with out taking the shutters from the frame) exc 1.5 Sqm and exc. 4 Sqm each with shutters etc complete all as specified and directed.
S& F partly glazed (5.5 mm thick tinted sheet glass) and partly prelaminated board panel (min 12 mm thick) aluminum door consisting of frame of 63mm x 38 mm size with shutter fixed on frame . Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with automatic door closer equipments fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement etc complete ( wall thickness of member is not less than 1.0 mm ) confirming to IS complete all as specified and directed.
S&F aluminium windows and ventilators sliding tye consisting of frame 63mm x 47 mm shutters 39 mm x 18 mm with rollers and locking arrangements and aluminium grills ets with 4 mm thick tinted glass with rubber gasket and aluminium beading etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Wall thickness of aluminium members is min 1.0 mm) as approved by GE/ Engg-in Charge complete all as specified and directed.
S & F in repair Aluminium (Die cast) body door closer hydraulically regulated designation No.3 universal type suitable for door shutter upto 1.00 m in width etc complete all as specified and directed.
S & F in repair double action floor spring hydraulically regulated made up minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu.m, in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L PCC 1:3:6 Type C-2 ( using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Supply and fixed in repair of CP soap dish of 150 mm dia incl. fixing with cp screws on wall etc complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .