Renovation converting of boys and girls hostel facilities to family accn Block A at SF accnDwarka New Delhi

Demolition and masonry work M&L of demolishing R.C.C. slab work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

M&L of demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

M&L of 20mm cement plaster of mix 1:4(1 cement:4 fine sand) on half brick wall.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for RCC slab. Mild steel and Medium Tensile steel bars.

Periodical services M&L of repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, incl cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, incl disposal of rubbish to the dumping ground within 50 mtrs lead: with cement mortar 1:4(1 cement:4 coarse sand)

M&L of removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth incl necessary repair to scratches etc complete.

M&L of providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incl distempering two or more coats with 1st quality acrylic distemper.

M&L of providing and applying one or more coats 1st quality acrylic distempering of approved brand and manufacture.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work.

M&L of apply one or more coats of painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work of steel & wooden surfaces.

Joineries work Providing and fixing of ISI marked flush door shutters confirming to IS;2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both facesof shutters, 35mm thick including stainless steel butt hinges with necessary screws in all complete.

M&L of fly proof stainless steel grade 304 wire gauge with 0.5mm dia wire and 1.4mm wide aperture with matching wood beading.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10 mm

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete, 100x85x5.5mm (Heavy type)

Providing and fixing bright finished brass handles with screws etc.complete: 125mm

Providing and fixing of aluminium sliding door bolts ,ISI marked anodized(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc complete 300X16mm

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete

Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty, float glass panes of thickness 4mm.

Providing and fixing of three track three panels sliding window with fly proof S.Swire mesh (Two nos. glazed & one no. wire mesh panels)made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazingbead / double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) with EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size.

Providing and fixing chromium plated brass curtain rod 20mm dia having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary in complete

Providing and fixing of kitchen cub board with pre-laminated flat pressed three layer particle board 18mm thick having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping with partition shelves as required including necessary screws and bright finished stainless steel piano hinges complete as per direction of Engr-In-Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Providing and fixing CPVC pipes 15 mm dia internal work-exposed on wall having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps, jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engr-In-Charge.

Providing and fixing CPVC pipes 15 mm dia concealed work including cutting chases and making good the walls having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps, jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engr-In-Charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ,15mm nominal bore

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete,32mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make of rectangular shape 1500x 450mm.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass two way bib taps long body approved quality including cutting and making good the walls wherever required.

Providing and fixing of Health Faucet for EWC, approved quality.

Providing and Fixing, S.STEEL Soap Dispenser (Heavy Traffic) liquid soap dispenser with push lever assembly Euronics Cat. No. ES 09 make or approved equivalent.

Providing and fixing of SS towel rack approved quality.

Providing and fixing of shower head with SS wall hanging rod approved quality.

Providing and fixing of PVC connection pipe

Bath room corner glass (three shelves)

Wall mounted glass shelve on wash basin

Tiling work Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying rectified Glazed Ceramic wall tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Granite work Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Electrical work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loopearthing as required.

Wiring for circuit/ sub main wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRPVC insulated copper conductor, single core cable in casing capping as required.

Wiring for circuit/ sub main wiring along earth wire with the 2x4 sq mm+1x4 sq mm earth wire of FRPVC insulated copper conductor, single core cable in casing capping as required.

Supplying and fixing following modules switch/ socket on the existing modules plate & switch box including connections but excluding modules plate etc as required. (a) 15/16ampswitch

Supply and fixing of –ditto- but (b) 5 pin 5/6 amp socket outlet

Supply and fixing of –ditto- but (c) 5 pin15/ 16 amp socket outlet

Supply and fixing of –ditto- but (d) 5/6 amps switch

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. (a) 1 or 2 Module (75mmX75mm)

Supply and fixing of –ditto- but (b) 3 Module (100mmX75mm)

Supply and fixing of –ditto- but (c) 4 Module (125mmX75mm)

Supply and fixing of –ditto- but (d) 6 Module (200mmX75mm)

Supply and fixing of –ditto- but (e) 8 Module (125mmX125mm

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (a) 1 or 2 Module

Supply and fixing of –ditto- but (b) 3 Module

Supply and fixing of –ditto- but (c) 4 Module

Supply and fixing of –ditto- but (d) 6 Module

Supply and fixing of –ditto- but (e) 8 Module

Supply and fixing of batten/angle holder including connection etc as required.

Supply and fixing of exhaust fan, Make-Phillips/Havells/Bajaj/Standard or equivalent

CHANDAN KUMAR THAKUR

GIRI AND SONS