M and R to Murbad Water Supply Scheme Operation and Maintenance of Water Works and Water Supply Scheme at Murbad and Addl. Murbad Indl. Area.

Amount

Operation & maintenance of water works, electrical installation & maintenance of water supply scheme in Murbad & Addl. Murbad Indl. Area in shift duty.

Engaging JCB for excavation in all strata during maintenance of water supply line & distribution line as & when required as directed by Engineer -in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Hire of Diesel welding plant/set 30HP.

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

White lead

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC With fine aggregate (Crushed sand VSI Grade)

CI PIPES

Providing and supplying ISI mark C.I. S&S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. (Suitable for Tyton / Pig lead joints)

a) Class ‘LA‘

Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.

For M.S. / R.C.C. / C.I. / P.S.C.

Supply of C. I . Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Dia of Pipe : 200.00 mm (I. D.) Thickness of pipe :

Dia of Pipe : 250.00 mm (I. D.) Thickness of pipe :

Dia of Pipe : 300.00 mm (I. D.) Thickness of pipe :

Dia of Pipe : 400.00 mm (I. D.) Thickness of pipe :

Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified.

5 mm to 8 mm thick

i)) Upto 250 mm. dia.

ii)) Above 250 mm. Upto 500 mm. dia.

Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness.

ii) Above 5 mm. Upto 10 mm.

Supply of rubber packing

Supply of grease.

Supply of Gland dori.

Rebate for Old CI pipe (Wt.of 5.5m pipe)

Rebate for Old MS pipe (Wt.of 5.5m pipe). The rate of item shall not be quoted below Rs.32.00 per kg. The upset rate will be Rs. 32.00 per Kg for this item.

JUEL ELECTRICALS AND ELECTRONICS (BID ID -6942993)

Usha Engineers (BID ID -6935414)