52/2024-25/TCD/BSNL/MT

Amount

Deduct for not providing hinges in doors, windows or clerestory window shutters with : a) ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws:( i) For 2nd class teak wood and other class of wood shutters

Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): a) 18 mm thick

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : a): 30 mm thick shutters : (i) with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated hollock wood

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessaryscrews etc., complete: a) Overall width 35 mm

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) : a) 250 mm weighing not less than 280 grams

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 100 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: a) Twin rubber stopper

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete: a) Double strip (horizontal type)

Providing and fixing door seal of approved quality with screws all complete as per direction of Engineer in charge.

Providing and fixing 25 mm diameter fency curtain rods of approved design with required number of brackets fixed with stainless screws and wooden plugs etc. wherever necessary along with end caps all complete as per the direction of Engineer-in-Charge.

Providing and fixing 100 mm M. S. handles in steel glazed windows with necessary nuts and bolts etc. complete as per direction of Engineer-in-Charge:

P/F fly proof galvanized M.S. wire gauge to window / door shutter using galvanized. M.S. wire gauge with avg. width of aperture 1.4mm in both directions with wire of dia. 0.63 mm with required nails, screws etc. complete as per direction of Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: a) Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) One or more coats on old work.

French spirit polishing : a) One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade : a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge: a) With cement mortar 1:4 (1cement: 4 coarse sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: a) Of area 3 sq. metres and below

Credit for taking away unserviceable dismantled materials: a) Unserviciable PVC Items

Credit for taking away unserviceable dismantled materials: a) Unserviceable wooden doors

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing Steel Chrome Finish Health Faucet hand shower for toilet with flexible tube upto 1 metre long with wall hook and fixing with S.S. screws all complete as per direction of Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: a) 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: a) Flexible pipe : (i) 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : a) 100 mm diameter .

Repairs to side hung steel window leaves of size upto 600x1200mm approx. against improper functioning including replacing the existing faulty hinges by box type hinges, making good the jambs and soffits for free movement of window leaves complete as per of direction Engineer in charge.

DEVESH AGARWAL (BID ID -3123807)