Construction of 01 No. 132KV Avaada Solar Feeder Bay alongwith associated works at 220KV Substation Dataganj under ETD, Budaun

Amount

Construction of 01 No. 132KV Avaada Solar Feeder Bay alongwith associated works at 220KV Substation Dataganj under ETD, Budaun , with all cost of men, misc. consumables, normal & special t&ps etc required to be arranged by agency for satisfactory completion of the work, with all due care of safety & precautions as per technical specifications and direction of the supervising engineer, as per details below :

Dismentalling of following equipments & structure:-

145KV CT alongwith opening their jumper

145KV PT alongwith opening their jumper

BCT structure

120KV LA alongwith opening their jumper at 220KV Substation Dataganj

ALP structure at 220KV Subatation Dataganj

Meter cubicle with 02No ABT energy meter

Loading, unloading & safe carriage of above dismentalled material from 132KV Substation Usawan to 220KV Substation Dataganj.

Erection of following equipments & structure:-

145KV CT alongwith re-jumpering

145KV PT alongwith re-jumpering

BCT structure

120KV LA alongwith re-jumpering at 220KV Substation Dataganj

ALP structure at 220KV Subatation Dataganj

Meter cubicle with 02No ABT energy meter

145KV CT juction box

145KV PT juction box

Laying of following size control cable in cable trunches from ABT meter cubicle in control room to CT/PT, their juctionm boxes etc. in switchyard as per cable schedule including shifting of cables drums from sotres place at the substaion to erection site and shifting back balce cables to store at the substation to erection site.

2Cx2.5Sq. mm.

4Cx2.5Sq. mm.

Providing & laying of following size GI Pipes from CT/PT juction boxes in switchyard to meter cubicle box in control room for laying of control cables through GI Pipe as per site requirment alongwith associated work such as cutting making threads for fitting of sockets, elbows, drassing etc. with due earthing of laid GI Pipe at each end.

2” Dia GI Pipe

1” Dia GI Pipe

Termination of various sizes above laid control cable from CT/PT to their juction box and juction box to meter cubicle including dralling of holes providing & fixing of cable galnds, farrules and Cripping type lugs.

Making of sheilding Mesh for 132 KV LA By Fabrication of 3 meter long electrodes with 36 mm dia ms rod bar having 150mm long conical shape and then piercing vertically in the groung with top 500mm below groung level jointing electrocs with 75x10mm size MS Flat by welding for making mesh and finally painting of the shelding mesh/earthing strip witk anticorrsive paint with the digging of earth/trunch and its back filling.

Providing, Cutting, Straightening & Laying 500 mm below inside Ground and above the Ground of M.S. Flats for Earthing of the Aux. Structures, Equipments to Connect the same with Main Earth Mat & with the Object to be Earthed including Excavation of Trenches & its Back Filling etc. as per details below :

Earthing of Aux. Structures and Equipments ( CTs, PTs, LA etc. with 75 × 10 mm size M.S. Flat.

Earthing of Aux. Structures and Equipments Junction Boxes, Energy Meter Cubical etc. with 50 × 6 mm size M.S. Flat.

Painting of M.S. Earthing Strips with 1 coat of Red Oxide Primer & 2 coats (The 2nd coat of Paint shall be applied at the gap of 48 hrs. when 1st coat of Paint is done & Checked by concerned A.E. / J.E.) of 1st quality Synthetic Enamel Paint of Asian / Berger / Nerolac make in Bus Green / Black Colour with all Cost of Materials after due Rubbing with Sand Paper & Wire Brush, as per details below :

Painting of 75 × 10 mm size M.S. Earthing Strip in Bus Green Colour.

Painting of 50 × 6 mm size M.S. Earthing Strip in Bus Green Colour.

M/s S.S. Refregeration (BID ID -4686612)

SHRI BALAJI ENGG. WORKS (BID ID -4682780)

M/S DHIRENDRA SINGH (BID ID -4689003)

Hi-tech power transmission (BID ID -4687339)