Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.6 LAccepted-AOC PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹49.9 L+₹6.2 L (14.1%)Rejected-Finance AT PO CHANDIPUR BALASORE 756025 | BALASORE | BALASORE | ODISHA | 756025 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹50.9 L+₹7.1 L (16.3%)Rejected-Finance 28 GREEN PARK PO BELGHARIA KOLKATA WEST BENGAL 700 056 | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹52.0 L+₹8.2 L (18.7%)Rejected-Finance AT SRIKONA PS CHANDIPUR DIST BALASORE ODISHA 756 025 | CHANDIPUR | BALASORE | ODISHA | 756025 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹53.2 L+₹9.4 L (21.5%)Rejected-Finance KACHERY ROAD BALASORE 756001 ODISHA | BALESHWAR | ODISHA | 756001 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jun 2023, 6:00 pmClosed
GE I R AND D CHANDIPUR
GE I R and D Chandipur Post Chandipur PIN 756025
REPAIR RESURFACING OF ROAD AT CERTAIN PLACES FROM SITE A TO NINE MILE SQUARE SITE B, OP, NEAR ARUHABAD VILLAGE AT CHANDIPUR UNDER AGE BR II CHANDIPUR
2023_MES_600358_1
8850/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
Chandipur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandipur
₹90,000
Yes
30 Jun 2023
1 Jun 2023
23 Jun 2023
1 Jun 2023
21 Jun 2023
15 Jun 2023
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.
Scarifying or picking graveled or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 100mm removing material and stacking complete all as specified.
M&L for laying and compacting 75mm thick (compacted thckness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and roling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specification for Road and Bridge works 2013.
Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth,making good by filling in screened & graded road metal , watering and well ramming (including supply of road metal) complete all as specified and directed.
Preparation of unsurface WMM by brushing with wire brushes form removing caked, mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming tack coat with bituminous primer at 10 kg/10 Sqm
Preparation of Black top surfaces by brushing with wire brushes form removing caked, mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming tack coat with bituminous primer at 5 kg/10 Sqm
M&L Premix bituminous macadam using paving bitumen laid/rolled and compacted to required gradient and camber using 4% paving bitumen (VG-30) by weight of total mix shall be hot mix plant and laid by mechanical paver (consolidated thickness 75mm or less)
M&L applying evenly a priming / tack coat on bituminous macadam surfaces with bitumen primer @ 3Kg / 10 Sqm complete all as specified and as directed.
Providing and laying 40mm thick (Consolidated thickness) bituminous premix semi dense asphaltic concrete (SDAC) with 5.5% binder content (VG-30) by weight of total mix, shall be hot mix plant and laid by mechanical paver rolled and compacted to required camber and gradient by 8-12 ton vibrating (Tendom) roller complete all as specified and directed by Engr-in-Charge
Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth, making good by applying tack coat @ 5 kg /10 Sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder(paving bitumen) 9.8 kg per/10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed mecadam, binder and chipping), depth of pot holes exceeding 30 mm .
M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.
DS ENTERPRISES
J B NATH AND SON
M/s Manas Ranjan Bera
R.B.Construction
bholanath bera
Sagar Electricals
chauhan syndicate
MS SUBHAM ENGINEERING AND CO
Bidder Name
RANA ENTERPRISES
DS ENTERPRISES
J B NATH AND SON
Sagar Electricals
chauhan syndicate
R.B.Construction
MS SUBHAM ENGINEERING AND CO
bholanath bera
M/s Manas Ranjan Bera
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .