REPAIR OF ROOF CEILING PLASTERING JOINERY AND MISC WORKS INCL PERIODICAL SERVICES AT RHENOCK AND RONGLI UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work position, complete all as specified and as directed.

M&L for second class hard-wood in scantling fixed in clean swan, complete all as specified and as directed.

Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in unframed work position, complete all as specified and as directed.

M&L for second class hard-wood plain fillets sectional area exc 13 but n. exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness including cover fillet, complete all as specified and as directed.

S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed.

M&L 4 mm thick E Board (Everest) non combustible moisture resistant plain building boards, fixed to timber/GI aluminium frame work with screws as in ceiling, complete all as specified and as directed.

M&L preparing new surfaces,plastered or unplastered and applying three coats of white wash on undecorated surface of ceiling for AC boards, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off, complete all as specified and as directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L 300 x 200 x 7 mm thick coloured glazed ceramic tiles in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick screed bed or bedding layer in CM (1:4) finished even and rough, complete all as specified and as directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in CM (1:4), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, path/steps etc, complete all as specified and as directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement, complete all as specified and as directed.

M&L for 38mm wide glass dividing strips 3mm thick as in floor, complete all as specified and as directed.

Demolition of Brick/PCC/ Stone wall built in cement motar, complete all as specified and as directed.

M&L Precast cement concrete block masonry with solid blocks of (1:3:6) type C-1, (using 20mm graded crushed stone aggregate), exc 10cm in width and setting in CM (1:6), complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in (1:4), finished even and smooth without using extra cement with water proofing compound, complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in (1:6) finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in (1:4) finished even and smooth without using extra cement with water proofing compound including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting as priming coat , complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting as priming coat, including a thick layer of wall care putty (Birla white or equivalent), complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of chalk whiting as priming coat, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash on walls, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.50 sqm but n. exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down shutter of any description area exc 1.0 sqm but n. exc 2.0sqm each leaf, complete all as specified and as directed.

Taking down shutter of any description area n. exc 1.0sqm each leaf, complete all as specified and as directed.

S&F pressed steel frame of size 165 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc, complete all as specified and as directed.

S&F for second class hard-wood plain, solid, straight chowkats and frames wrough framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed.

S&F 30mm thick second class hard wood, plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density wood particle board with commercial face veneers, complete all as specified and as directed.

S&F 30 mm thick second class hard wood, glazed and skeleton shutters for door, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), complete all as specified and as directed.

S&F 30 mm thick second class hard wood, glazed and skeleton shutters for window, ventilator etc, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b), complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in openings, complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F mild steel work as in window frames, window guard bars, plain, let in and fixed idependently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and as directed.

M&L Preparation new steel surfaces, of any description, over 10cm width or girth and applying two coat of synthetic enamel paint (Corrugal paint) over one coat of red oxide primer, complete all as specified and as directed.

M&L Preparation new steel surfaces, of any description, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed.

M&L Preparation new wooden surfaces of any description, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

S&F 75mm size butt hinges, medium weight, cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F in repair 75mm size butt hinges, medium weight, cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F in repair 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F of 150mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F of in repair 150mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F of 200mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F of in repair 200mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed , complete all as specified and as directed.

S&F 125mm size aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.d

S&F in repair 125mm size aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F in repair 150mm size aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F in repair 300mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F in repair drapery curtain rod dia 18-20mm dia powder coated in colour with fixing brackets, stops, rollers etc, complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of synthetic enamel paint (Corrugal), complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth (Other than roof) not other wise specially described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description and applying one coats of synthetic enamel paint over 10cm width or girth, complete all as specified and as directed.

M&L for preparation of surfaces of old wood and wood based materials, of any description and girth, not otherwise described and treated with creosote oil, complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.

M&L for complete removal of exisiting treatment on old plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistan primer, complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of coats of cement base paint, complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of oil bond distemper, complete all as specified and as directed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

PRASAD PRADHAN AND SON (BID ID -3319451)

M/S JAYSHREE CONCERN (BID ID -3319465)

MS BRAHMA CONSTRUCTION (BID ID -3319443)

GYANENDRA THAPA (BID ID -3319749)

MANOJ JINDAL (BID ID -3319463)

SANJAY MITTAL (BID ID -3319447)

G K SUTHAR (BID ID -3319479)