Repairing of 6000 M.T. Capacity PCF Godown at Nagla patti Distt.Kasganj

Repairing of 6000MT Capacity PCF godown at Nagla Patti Distt. Kasganj (U.P.)

Dismentling of corrugated A.C. roof Sheetincluding stacking of dismentled materials as directed by Engineer Incharge with in a distance of 60 metres.

Dismentling of corrugated A.C. ridgeincluding stacking of dismentled materials as directed by Engineer Incharge with in a distance of 60 metres.

Supply & Fixing 6 mm thick gray corrugated A.C. Sheet roofing in position including supply of all materials, labour & T and P etc. required for proper completion of the work.

Supply and fixing of 0.69mm thick 1.0mm wide G.I. plain sheet in shape of ridge over A.C sheat roofing and also supply and fixing of 40x5mm flat iron as wind tie over G.I. ridge including drilling of holes, welding, cutting rebetting etc. required for proper completion of the work.

Supply & laying one layer of Tarfelt S.T.P grade III of the junction of wall & roof as per direction of E/I including necessary overlap, given a coat of approved Mastic paint/bitumin 85/25 below the Tarfelt & including supply of all materials, labour T&P etc. required for proper completion of work.

Dismentelling of grids trusses and other steel work inluding stacking of material as directed by E./I with in a distance of 60 m.

Fabrication and supply of tubler trusses & purlins holding down bolts and bearing plate of section and size as directed by Engineer in charge and as per drawing.

Assembling at site hoisting & fixing in position of the tubular plat-form trusses with holding down bolts and fixing of purlins and bracings of trusses including supply of all materials, labour, T&P etc. required for proper completion of work but excluding supply of trusses and its all accessories.

M.S. Steel or iron work of heavy sizes and section wind ties etc. wrought to required form including drilling holes rivetting and welding where necessary and also including supply of steel bolts nuts wastage etc. and their fixing required for proper completion of work including providing one coat of steel prime work ties of 40x6mm. flat.

Making of Golai of size 15cm at Parapet wall and 25 cm over A.C.sheet of P.C.C 1:2:4 (1 cement, 2 coarse sand, 4 stone grit 10 mm gauge) with floating coad in joint of parapet walls & A.C. sheets and also dismentling of old plaster and cleaning the surface including supply of all material, labour T&P etc. required for proper completion of the work.

Supply and fixing of rolling shutters of approved make of 80x125 mm (3"x18gauge) cold rolled M.S lath inter locked through their entire length joined together at the end by lock & mounted on specially disigned pipe shafts with brackets, side guiders & arrangement are inside and outside locking with push & pull operation complete but excluding the cost of top cover & spring .

Providing & fixing 27.5cm long wire spring grade two for rolling shutters.

Providing and fixing of top cover for rolling shutters made of 18 guage M.S sheet .

Painting two coats on steel and other metal surface up to 10 cm width are grith not exceeding 0.10 sqm. in area with superior synthetic Enamel paint such as Luxol 3, higloss apcolite superlac deluxe specified brusing to give an even shade & including the cleaning the surface of all dust, durt and other foreign matter sand papering and stopping including cost of all materials labour T&P etc. required for proper completion of the work.

Providing & Applying leak proof compound over j hooks including supply of all materials, labour T&P etc. required for proper completion of work.

Dismantling of existing plaster including disposal of refuse material as directed by E./I with in a distance of 60 m.

First class brick work in 1:6 cement and coarse sand 2.20 fineness modulus mortar in B/W including supply of all materials, labour, T&P etc. required for proper completion of work.

Dismentelling cement concrete floors inluding stacking of dismenteled material as directed by E./I with in a distance of 60 m.

R.C.C work with cement, approved coarse sand and 2 cm. gauge approved stone ballast in the proportion 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. binding wire and including necessary centering and shuttering etc. and including supply of all materials, labour, T&P etc. required for proper completion of work. (Binding wire to be supplied by contractor free of cost.)

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in overall rate) wrought to required shape as necessary including bending for proper completion of work including supply of steel and its wastage bend. Hook & authorized overlapping shall be measured up to floor two level.

12 mm. thick plaster in 1:4 and coarse sand mortar including supply of all materials, labour, T&P etc. required for proper completion of work including proper curing of plaster.

40 mm thick cement, concrete flooring 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm nominal size) laid in one layer finished with floating coat of neat cement.including supply of all materials, labour, T&P etc. required for proper completion of work.

Finishing walls with two coat of waterproof cement paint of approved make such as super snowcem, durocem, robiacem, gutlucem quality on previously old treated surface to give an even shade after throughly brushing to remove all durt and remains of loose powdered materials including curing and cost of all all materials labour T&P etc. required for proper completion of the work.

First class brick work in 1:6 cement and coarse sand 2.20 fineness modulus mortar in B/W including supply of all materials, labour, T&P etc. required for proper completion of work.

12 mm. thick plaster in 1:4 and coarse sand mortar including supply of all materials, labour, T&P etc. required for proper completion of work including proper curing of plaster.

Finishing walls with two coat of waterproof cement paint of approved make such as super snowcem, durocem, robiacem, gutlucem quality on previously old treated surface to give an even shade after throughly brushing to remove all durt and remains of loose powdered materials including curing and cost of all all materials labour T&P etc. required for proper completion of the work.

Earth filling including watering, rammming consolidation and dressing etc. including cost of material, labour, T&P etc. required for proper completion of the work.

TOTAL (Sr. No. 1 to 27)

ADD 18% GST