Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹30.2 L+₹90,067.80 (3.07%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹31.3 L+₹2.0 L (6.67%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹32.3 L+₹3.0 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
9 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Everyday E/M maintenance for resolving complaints in Varanasi Cantt.
2024_MES_662688_1
8752/E8
Open Tender
Civil Works
Item Rate
180 days
Varanasi
As per NIT
6 documents required · 6 mandatory
₹500
GE (East) Prayagraj
₹96,000
Yes
7 Nov 2024
28 Jun 2024
16 Sept 2024
28 Jun 2024
9 Sept 2024
12 Jul 2024
28 Jun 2024 - 5 Jul 2024
Amount
Attending complaints and carrying out electrical maint work for day to day Internal electric or fans or geysers or solar water heaters complaints such as repair / rectification / replacement of defective items like wiring, service cables, switches, sockets,holders, ceiling rose, call bells, condensers,tube rods,fittings,fixtures,LED drivers,MCB's,MCCB's,DB's etc. through skilled trademen at any location complete all as specified and directed by Engr-in-Charge. (Note- Store required will be measured and paid seperately) Note :- (i) Contractor or his representative will report daily to the AGE E/M Yard VARANASI at 8:30AM to collect the complaints in the various locations of AOR of AGE Varanasi Cantt. (ii) Each complaint shall be attended / check on same day and be resolve within 48 Hrs (iii) Multiple job cards or multiple complaints on one job card may be issued at a time based on the complaints available daily. Contractor will ensure sufficient manpower to resolve the issues with in time line given above. complaint for one article (irrespective of Nos of complaints in one job card
(iv) All labour and material reqired for reoslving the complaint,excavation (including taking down and dismantling of unit/article (if reqired) shall deemed to be included in the rates quoted for each spair part here-in after as "S&F in repair" under srl item No. 1.02 to 1.82 (v) Rates quoted for this item is includes manpower/labour reqired for collection for complaints from office, reporting labour/engineer on site, reporing feedback to the authority and transportation reqired for the same. Cost of T&P reqired for execution of work shall also deemed to be included in quoted rates. (iv) Contractor or his representative will submit daily report on the status of complaint resolved and pending with reason and the store consumed. (vi) Cost of miner parts/ material i.e screw, nails, washers, gullies, fuse, minor requirement of 2/3 core wire, insulation tap, oiling greasing etc required to making the article serviceable/working at site shall deemed to be included in quoted rates.
Switch piano single pole one way 6 Amps flush button type conforming to IS complete all as specified & directed.
Socket out let 5 pin, 5 Amps flush type complete all as specified and directed.
Bell push 6 Amps piano flush type conforming to ISI complete all as specified & directed.
Switch piano single pole Two way 6 Amps flush button type conforming to IS complete all as specified & directed.
Electronic fan regulator, medium 5 step type 80/100 Watt, 240 VAC complete all as specified and directed.
Ceiling rose surface type bakelite 65x50mm three terminals complete all as specified & directed.
Angle/batten type lamp holder, PVC/Polycarbonate type with back plate complete all as specified and directed.
Lamp holder of base cap G-13 suitable for 20/36 Watt FTL complete all as specified and directed.
Switch piano single pole one way 15 Amps flush button type conforming to IS complete all as specified & directed.
Switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amps, and flush type universal complete all as specified & directed.
Electric ding dong bell AC operated on 230 Volts complete all as specified & directed.
MCB 6 to 32 Amps Single pole 'C' series, 10 KA complete all as specified & directed.
MCB 32 Amps Double pole 'C' series, 10 KA complete all as specified & directed
MCB 40 - 63 Amps Double pole 'C' series, 10 KA complete all as specified & directed.
MCB 63 Amps triple pole neutral, 'C' series, 10 KA complete all as specified & directed.
Switch modular flush type 10 Amps, single pole, one way complete all as specified and directed.
Socket modular flush type 10 Amps, 5 pin complete all as specified and directed.
Fan regulator, modular type, 5 stepped, electronic type, single phase 120 watt 2 module complete all as specified and directed.
Switch modular flush type 20 Amps, single pole, one way complete all as specified and directed.
Socket modular flush type 20 Amps, 6 pin complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 0.75 Sqmm or 24/0.20, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 1.5 Sqmm or 22/0.30 or 48/0.20 or 30/0.25, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 2.5 Sqmm or 36/0.30 or 80/0.20 or 50/0.25, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 4.0 Sqmm or 56/0.30 or 128/0.20, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 6.0 Sqmm or 84/0.30, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 10.0 Sqmm or 140/0.30, 1100 Volt grade, ISI marked complete all as specified and directed.
FRLS PVC insulated, unsheathed flexible copper conductor wire of nominal size 25.0 Sqmm , 1100 Volt grade, ISI marked complete all as specified and directed.
PVC insulated, unsheathed twin twisted copper conductor wire of nominal size 23/0.0076, 1100 Volt grade, ISI marked complete all as specified and directed.
PVC insulated, unsheathed twin twisted copper conductor wire of nominal size 40/0.0076, 1100 Volt grade, ISI marked complete all as specified and directed.
S&F PVC insulated aluminium conductor cable service wire multi stranded of size 10 Sqmm 2 core
S&F PVC insulated aluminium conductor cable service wire multi stranded of size 6 Sqmm 2 core
Condenser of 2.5 MFD, 440 Volt AC, conforming to IS-1709 suitable for fans complete all as specified and directed.
Condenser of 3.15 MFD, 440 Volt AC, conforming to IS-1709 suitable for fans complete all as specified and directed.
Condenser of 4.0 MFD, 440 Volt AC, conforming to IS-1709 suitable for fans complete all as specified and directed.
PVC insulation tape of width- 18mm, thickness- 0.125mm in length of 7 mtr, ISI marked for proper insulation of joints in wire as required complete all as specified and directed.
Energy efficient LED bulkhead in high pressure die cast aluminium housing of system wattage- 6.5 Watt, Lumen output- 700 Lm, colour Temp- 6500 K having ingress protection- IP 65 for dust, water & IK 08 for external impact complete all as specified and directed.
LED tube light fitting with energy efficient/ saving in polycarbonate housing of nominal wattage- 20 Watt, Lumen output- 2100 Lm or above, Colour Temp- 6500 K, operating voltage - 230 Volt AC, THD < 20 % with integral/ in built driver, having short circuit and surge protection upto 4 KV and other safety test as per IS 15885 Part 2/ Section 13 including making minor addition/ alteration in existing circuit as required fixed in replacement of existing tube light complete all as specified and directed.
Supplying & Fixing GI electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should be crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 25 x 4 mm GI strip extra,and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.)
Spot light with recessed mounted adjustable LED downlights made of extruded due cast aluminium housing and high power LED as a light source of system wattage - 12 Watt, Colour Temp - 6000 K, Minimum Lumen output- 800 Lm, cutout dia - 125mm, complete with including separate independent electronic LED driver and accessories pre-wired upto terminal block including making connection and testing complete all as specified and directed.
LED retrofit Inverter lamp of capacity 9 watt,power backup upto 4 hrs B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.
LED tube light fittings of 20 wattage with inbuilt battery backup including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly, complete all as specified and directed.
Decorative wall light fixture made up of Polycarbonate, suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.
Ceiling light with recessed mounted LED light luminaries of size 600 mm x 600 mm an independent isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage- 36 watt maximum, Colour Temp - 3000 to 6500 K, Lumen output- 4200-4400 Lm, THD < 10%, PF > 0.95, having short circuit and surge protection upto 4 KVA with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.
LED ceiling mounted light fitting 12 W ,230 volt LED 6000 K surface decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling/wall complete all as specified and directed.
Spot light with recessed mounted adjustable LED downlights made of extruded due cast aluminium housing and high power LED as a light source of system wattage - 6 Watt, Colour Temp - 6000 K, Minimum Lumen output- 800 Lm, cutout dia - 125mm, complete with including separate independent electronic LED driver and accessories pre-wired upto terminal block including making connection and testing complete all as specified and directed.
Non metallic Rigid PVC conduit of 20mm nominal dia, ISI marked, conforming to IS 9537 Part III, medium grade including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc, complete all as specified and directed. (replacing worn out wooden batten/PVC conduit)
Non metallic Rigid PVC conduit of 25mm nominal dia, ISI marked, conforming to IS 9537 Part III, medium grade including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc, complete all as specified and directed. (replacing worn out wooden batten/PVC conduit)
Pressed MS/GI steel terminal boxes of depth not less than 50mm, flush type, of thickness not less than 1.6 mm of 4"x4" size alongwith new 3mm thick plastic laminated sheet cover of suitable size including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Hylem sheet 3mm thick plastic laminated sheet cover for 5"x5" size shunken box size including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Pressed MS/GI steel terminal boxes of depth not less than 50mm, flush type, of thickness not less than 1.6mm of 7"x4" size alongwith new 3mm thick plastic laminated sheet cover of suitable size including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Pressed MS/GI steel terminal boxes of depth not less than 50mm, flush type, of thickness not less than 1.6mm of 8"x10" size alongwith new 3mm thick plastic laminated sheet cover of suitable size including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Pressed MS/GI steel terminal boxes of depth not less than 50mm, flush type, of thickness not less than 1.6mm of 8"x12" size alongwith new 3mm thick plastic laminated sheet cover of suitable size including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Single phase & neutral MCB distribution Box of 2 way, single door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, din rail, earth barconfirming to IS 13032 & 86234 complete all as specified and directed. (Replacing Existing worn out Kit Kat DB/MCB DB/switch fuse unit)
Three phase & neutral MCB distribution Box of 4 way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, din rail, earth barconfirming to IS 13032 & 86234 complete all as specified and directed. (Replacing Existing worn out Kit Kat DB/MCB DB/switch fuse unit)
Single phase & neutral MCB distribution Box of 4 way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, din rail, earth barconfirming to IS 13032 & 86234 complete all as specified and directed. (Replacing Existing worn out Kit Kat DB/MCB DB/switch fuse unit)
Single phase & neutral MCB distribution Box of 6 way, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, din rail, earth barconfirming to IS 13032 & 86234 complete all as specified and directed. (Replacing Existing worn out Kit Kat DB/MCB DB/switch fuse unit)
Single phase & neutral MCB distribution Box of 8 way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, din rail, earth bar confirming to IS 13032 & 86234 complete all as specified and directed. (Replacing Existing worn out Kit Kat DB/MCB DB/switch fuse unit)
Sheet metal enclosure for VTPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp MCCB as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.
Sheet steel enclosure in single pole and neutral fitted with two pin and earth plug and socket of current rating 20 Amps complete with fixing one single pole MCB. 'C' series of current rating 25 Amps complete all as specified and directed.
Modular MCB one module single pole MCB. 'C' series of current rating 25 Amps fixing as per site requirement complete all as specified and directed.
Heating element threaded/ screwed/ triangular or cup style type 2000 Watt ISI marked of suitable make , complete all as specified and directed.
Thermostat suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, without taking down geyser, fixed in repair, complete all as specified and directed.
PVC connection cotton braided heavy duty with brass union/ coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, without taking down geyser, fixed in repair, complete all as specified and directed.
Hylem sheet 3mm thick plastic laminated sheet cover for 5"x5" size shunken box including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Hylem sheet 3mm thick plastic laminated sheet cover for 5"x8" size shunken box including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Hylem sheet 3mm thick plastic laminated sheet cover for 9"x11" size shunken box including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Hylem sheet 3mm thick plastic laminated sheet cover for 8"x12" size shunken box including cutting/ drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer all respect as specified and directed. Note: New switches, sockets, fan regulator required will be measured and paid separately under respective items of schedule.
Bib taps,15mm bore dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule
service cable un armoured of size 4 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.
service cable un armoured of size 6 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.
service cable un armoured of size 10 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.
LED street light luminaires 25 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Crompton Greaves cat No- LSTO-25- CDL ,Havell- LHETAXU7UN6W024, Orient -LSFS-025-CF-PC
LED street light luminaires 35 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Crompton Greaves cat No- LSTO-35- CDL Or Equivalent make in Havells/Bajaj
LED street light luminaires 60 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Crompton Greaves cat No- LSTO-60- CDL Havell- LHETAXU7PN6J060
LED street light luminaires 90 watt with pressure aluminium -die- cast powder coating housing & frame with heat resistant,high efficiency toughned glass with EPDM gasket for IP66 protection complete assembly with LED ,driver& accessories pre-wiredup to terminal block including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Crompton Greaves cat No- LSTO-90- CDL Havells- LHETAXU7IN6J090,C&S-LTESS40X2.5HPLED/LS
Hot press moulded PVC junction box of size 230mm x 170 mm x105 mm with 200A TPN Aluminium bus bars mounted/fixed on porcelien insulator shock and rust proof,cable entry from bottom and other sides,100% weatherproof, with pole mounting arrengement temperproof,fire retardant class FV-0 as per IS 11731 part -II or V-O as per UL-94 including flat iron clamp of size 25 x 3 mm with nut and bolt complete all as specified and directed.
Energy saving LED garden light fitting,decorative,bollard of capacity 10 watt with opal diffuser &aluminium reflector complete with all accessaries and fixing arrengement on PCC block of size 45mm X 45 mm alogwith fixing nuts,bolts and PVC insulated aluminium conductor,stranded type of size 4.0 sqmm,2 -core including taking down old/unserviceble garden light fittings any type and wattage all as directed.
PVC insulated & FR PVC round stranded sheathed conductor copper multi core round ( flexible)industrial cable 1100 volt with brightannealed electrolytic bare copper conductor for voltage 1100 volts grade of size 10 sqmm,4 core confirming to IS-694-1990 including taking down old/unserviceble cable any type from semi high/high mast poles of any height and connecting complete all as specified and directed.
LED integral flood light luminaires 120 watt in powder coated with aluminium die cast housing and frame,high efficiency,long life LEDs,loop in loop out connector,10 A G.F.P for each wiring heat resistant toughned lear glass cover and IP 66 protection completeassembly with LEDs,driver and accessaries pre wired up to terminal block in control gear compartment including connection on pole or building including taking down of old /unserviceble street light fitting complete all as specified and directed. Make- Wipro cat No-LR18-971-XX-57-XX,C&S- LTEFI120WHPLED,Havells-LHEPCZU7P46J120
LED integral flood light luminaires 200 watt in powder coated with aluminium die cast housing and frame,high efficiency,long life LEDs,loop in loop out connector,10 A G.F.P for each wiring heat resistant toughned glass in the front with unique flood optics to ensure uniform distribution and IP 66 protection complete assembly with LEDs,driver and accessaries pre wired up to terminal block including connection on pole including taking down of old /unserviceble light fitting complete all as specified and directed.
LED post top lantern 45W aluminium die cast suitable for fixing on GI pipe
Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed.
Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.
Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only.
Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.
M & L for bore hole for passing cable through / insertion of 80/50mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing upto the depth 450mm to 1200 mm complete all as directed by Engineer-in-charge. NOTES :- (i) Cost of equipments, tools & plants,material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe 80/50 mm dia shall be measured and paid separetely.
S &F for 32 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking down old /unserveciable existing pipe complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.
S &F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking out old /unserveciable existing pipe complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.
Supply, laying and testing cable with cable gland, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 25 Sq mm 4 core including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Supplying ,laying, commissioning & testing 16 Sqmm, 4.0 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Supplying ,laying, commissioning & testing 10 Sqmm , 4 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Supplying ,laying, commissioning & testing 10 Sqmm , 2 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Supplying ,laying, commissioning & testing 6 Sqmm , 2 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4mm galvanised iron strip incl taking down old existing complete all as specified and as directed.
M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelledwhite, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, , 20x15cm size
M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size,, 25x20 cm size
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight through joint heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 10 sqmm to 25 sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight through joint heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 25 sqmm to 50 sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight through joint heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 70 sqmm to 120sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size size 150 sqmm to 185 sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for straight through heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 240 sqmm to 300 sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 1100 volt grade cable for straight through cold shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 400 sqmm to 500 sqmm insulated armoured aluminium cable including taking down old/unserveciable joint kit complete all as specified and directed.
M&L for taking electric shutdown and employing labour for maintenance of LT panel/meter box panel incl welding work, painting with one coat of primer and two coat of synthetic enamel paint of Asian/Nerolac make and removing the scrub ,dust on panel all as directed & specified by Engr-In-Charge. Note- Minimum 3 labours with proper safety kit and cuttings tools, Painting accessories,welding and Jointing accessories reqd at site shall be provided by the contractor and rates are deemed to be included the quoted rates.
M&L for taking electric shutdown and employing labour competent to climb on trees for maintenance and trimming of tree branches touching to overhaul bare electric condutor lines/ electric installation upto the clearance of 2 mtr all around and removing the garbage and deposting when and where directed all as specified. Note- Required labour as decided by Engr-in-Charge labours with proper safety kit and cuttings tools, ledder, electric saw/generator set,wire rope etc shall be provided by the contractor and rates are deemed to be included the quoted rates.
S & F in repair 15 Mmm dia fancy type chromium plated with long shank and angle valve cast copper alloy screwed down type high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.complete all as specified and directed.
Supply and fix in repair PVC sheathed white colour three core copper flexible cable of size 23/.0076 complete all as specified and as directed.
M/s multienterprises (BID ID -3075188)
M/s A.KUMAR ELECTRICALS (BID ID -3072676)
M/S DEEKSHA CONSTRUCTION (BID ID -3067522)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .