Renovation of New Judge Bungalow No.-5 (Allotted in Favour of Honble Justice Mr. Ananda Sen) With Painting Work, False Celling Work, Changing of Existing Window by UPVC Windows with DGU Glass, Modular Kitchen Work and Wooden Wall Units in Room along

Amount

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc all completejob.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @0.90kg/ 10 sqm)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Dismantling aluminium/Gypsum partitons,doors,windos,fixed glazing and false ceiling including disposal of unserviceable surplus materials and stacking of serviceable materials within in 50 meters lead as directed by E/I.

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and fixing stanless steel(Grade 304) railing made of Hollow tubes,channells,plates etcincluding welding,grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,I/C fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc,of required sizie,onthe top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoreis such as nuts,bolts,fastners etc)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

ProvProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed onthe body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete.ing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

Supply of 12mm thick Toughened glass approved quality including all complete job.

Supplying, fitting and fixing 30mm thick solid core type non-decorative double leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing 4mm thick coirveneer board ISI marked IS :14842,plain lining with necessary screws,priming coat on unexposed surface etc complete job.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT IC 500 onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I)

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Three track thre panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 body Using R4 series withframe (115mm& above)x(45mm&above)& both glazed and fly screen sash (44mm &above)x(55mm&above) with zinc alloy(zamak)powder coated handle on every glazed panel along with multi point locking ksystem(height above 1.8m)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows,ventiators and partition etc. with 6mm thick clear float glass both side,having 12mm air gap,including providing EPDM gasket,perforated aluminium spacers,desiccants,sealant (Both primary and secondary sealant) etc.as per kspecifications drawings and direction of Engineer-in-charge complete.

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete stainless steel (grade 304) wire gause of 0.5mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

Filling the gap in between aluminium frame &adjacentR.C.C/Brick/stone work by providing weataher sillcon sealantover backer rod of approved quality as per architectural drawings and direction of E/I.Upto 5mm depth and 5mm width.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Providing & fixing of modular kitchen cup board 19mm thick BWP board of century ply on front top side with rack 1.5mm thick laminate laminated 2’0”x1’6”x0’9” steel rock hing bocket with teak wood beads and copping provision of all fitting of modular kitchen component such as shutters, channel rail ,nut bolts, hings glass all modular fitting all as pr building specification and direction of E/I Century mark ply & laminate,channel lock Handle and other fittings are hettich make, door closer Godrej & edge brinding with PVC all complete job(Including frame work of cocking plate form)

S/F/F Book shelf/upper head cabinet/Lower cabinet/ Book shelf/wall unit file cabinet including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1mm thick green Lam/century Lam, inside Laminate-0.8mm thick Green lam/century Lam channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC

S/F/F all height wall panneling of 12mm thick water proof ply(centure panic pine wood ISI mark,Termites) over 50mmx50mm Sal wood ,24mm thick water proof veneer(green dacore wood) finishing with malamine polished all complete inclouding all complete job as per building specification and direction of E/I

Providing and fixing printed wall paper of decorative approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

Supplying fitting and fixing of FABER ceiling Mount Mesh filter Decorative kitchen chimney as per building specification and direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES (BID ID -665772)