Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | ₹1.5 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹2.8 LRejected-Finance | ₹2.8 L | L2 | Rejected-Finance Highest |
| Sl No | Description | Qty | Unit | R.Ashok Kumar L1 | M KULANTHAISAMY L2 |
|---|---|---|---|---|---|
| 1.00 | Supply and delivery of wet type 20LPMx125m Headx2.00 HP mm submersible pumpset with motor and confirming to IS 8034/89 and IS 9283/79 with ISI marking | 1 | No | 25,974 ₹25,974 | 55,000 ₹55,000 |
| 2.00 | Single phase panel board (2.0 HP) with D.O.L as per standard specification. The pump set should be supplied with 5M flat submersible copper cable. | 1 | No | 7,864 ₹7,864 | 9,500 ₹9,500 |
| 3.00 | Supply and delivery of 4.00 sq mm Water Proof cable. | 160 | m | 200 ₹32,000 | 800 ₹1.3 L |
| 4.00 | Supply and delivery of following pipe pipe line materials(with ISI mark) etc complete. 32 mm GI pipe with B class | 6 | m | 287 ₹1,722 | 287 ₹1,722 |
| 5.00 | 32mm dia G.I Elbow | 4 | Nos | 99 ₹396 | 99 ₹396 |
| 6.00 | 32mm G.I Capling | 4 | Nos | 65 ₹260 | 65 ₹260 |
| 7.00 | 32mm G.M Non Retrun valve | 1 | Nos | 725 ₹725 | 725 ₹725 |
| 8.00 | 32mm dia G.I bend with coupler | 2 | Nos | 86 ₹172 | 86 ₹172 |
| 9.00 | 32mm dia G.I union | 1 | Nos | 187 ₹187 | 187 ₹187 |
| 10.00 | 32mm G.M Gate valve | 1 | Nos | 1,039 ₹1,039 | 1,039 ₹1,039 |
Tender Value
₹2 L
EMD Value
₹4,000
Closing Date
4 Mar 2026, 3:00 pmClosed
Executive Officer
TP Office, Pennagaram
GF 2025 26 Providing Mini Power Pump in Existing Bore Well at Ward No 18 Kodiur near PUE School in Pennagaram Town Panchayat
2026_DTP_668780_1
547/2025-4/A1
Open Tender
Water Supply/Equipments/Meter/Drilling/Boring
Pennagaram TP Limit
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹4,000
14 Mar 2026
28 Feb 2026
4 Mar 2026
28 Feb 2026
4 Mar 2026
28 Feb 2026
Supply and delivery of wet type 20LPMx125m Headx2.00 HP mm submersible pumpset with motor and confirming to IS 8034/89 and IS 9283/79 with ISI marking
Single phase panel board (2.0 HP) with D.O.L as per standard specification. The pump set should be supplied with 5M flat submersible copper cable.
Supply and delivery of 4.00 sq mm Water Proof cable.
Supply and delivery of following pipe pipe line materials(with ISI mark) etc complete. 32 mm GI pipe with B class
32mm dia G.I Elbow
32mm G.I Capling
32mm G.M Non Retrun valve
32mm dia G.I bend with coupler
32mm dia G.I union
32mm G.M Gate valve
20mm GI pipe with coupler medum class
20mmG.I Coupling
20mm CICP Tap
32mm HDPE hose
25mm pvc pipe
19mm nylon rope
32 mm HDPE hose coller
32 mm HDPE hose clip
1000liter H.D.P.E water tank with ISI mark (1270/1996)
Labour charge for the erection of submersible pump set in bore well including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter, Ammeter, three pilot(indicating) lamps capacitor single phase preventor, water level guard and laying and jointing the cable and twin earthing as per IS rules etc complete.
Supply and Run of 2x4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe (Bclass) suitable bend at both ends with necessary angle iron up right and end supports for mains.
Supply and Run of 2x4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V on 7/20 Gibearer wire for service connection mains.
Supply and fixing of following electrical materials. 16Amps MTPC Switch
16 Amps fuse carrier
Supply and fixing m.s single phase panel board meter sheet box including cost and convayance of materials and labour charge etc complete.
S& Fixing of M.S bore well Dummy
S&F M.S bore clamp
Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.
Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Brick work in cement motor 1:5 mix(one cement and five sand) using 2nd class country brick of size 9"x41/2"x3" including curing finishing and cost and conveyance of materials and labour charge etc complete as per std specification.
Plastering Cemend mortor 1:5 mix (one cement and five sand) 12mm thick including cost and conveyanace of materials and labour charge etc completed as per std specification.
Cement paint two coats of approved colour and quality including preparation of plastering wall surface , finishing neatly and all other labour ,materials cost etc complete as per std specification.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
BOQ_803531.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid