Improvement of Water Supply Scheme Jai Signh Wala Block Sangat District Bathinda under 2AI

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 90 Km) Up to 40 km (Item No. 5.2 (i)

41 km to 60 km

61 km to 90 km

b) Gagger Sand (Av Lead 315 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

151 km to 315 km

c) Bajri (Av Lead 315 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

151 km to 315 km

d) Filter Media (Av Lead 315 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

151 km to 315 km

Dismentling concrete or precast concrete d) Cement Concrete Plain 1:2:4 (Item No. 8.6)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (Item No. 9.8)

Reinforcement cement concrete M-30 Mechanical batch mixed using batch type concreate mixer as per IS : 1791 and vibrator by needly vibrator but excluding steel reinforcement centering and shuttering in super structure. (Item No. 10.23)

1st Class brick work in cement sand mortar 1:5 in foundation and plinth. (Item No. 11.5)

12.5mm C.P. 1:2. (Item No. 15.7)

Cement pointing 1:2 deep variety. (Item No. 15.59)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (Item No. 18.18)

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI c) 150mm i/d Sluice Valves Flanged (Item No. 28.27)

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- a) Top layer :- Fine sand screened, cleaned ans washed and graded (effective size 0.2 to 0.4 mm with uniformity co-efficient 2.00 to 3.00) from Pathankot or other approved source. (Item No. 28.51)

Construction of masonary Sluice Valve Chamber excluding sluice valve cover as per standard design and drawing of public health deptt. A) Size 0.6 m. x 0.6 m. (Item No. 28.66)

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSRs complete in all respects. (Item No. 28.90)

Proving & fixing 560mm ,500 mm,450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangula RCC manhole cover & frame ISI marked as per IS 12592-2002 including carriage from the store of Engineer -in -charge to site of work loading unloading including stacking and setting the same to correct lines over manholes including cement conc copping (M20) around the frame etc dia of steel for lifting hook is 16 mm (for EHD and HD) Medium weight. (Item No. 29.36)

Silt Clearance of S&S Tank. (Item No. NS)

Supplying and fixing 250mm i/d Galvanized iron sheet floating arm 5.20 mtr. Long including sluice valve, survivel bend, floating drum, extended rod with hand wheel. (Item No. NS)

Taking out filter media (top to bottom layer) from filter beds, washing & replacing the same after washing in filter beds etc. complete in all respect. A) Top Layer

b) 2nd Layer

c) 3rd Layer

d) 4th Layer

e) Bottom Layer

Washing the false floor slabs with brushing & cleaning the cross drains etc. complete in all respect. (Item No. NS)

Dismentaling existing un-serviceable measuring Gauge & placeing the same near pump chamber at site etc. Complete. (Item No. NS)

Dismentaling existing steel ladder for water tank of 1 No. OHSR 150 cum capacity & placeing the same near pump chamber at site etc. Complete. (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the wall & other side in the bottom slab of Clear Water Tank. (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the top dome and other side in the bottom dome including liffiting from ground to vessel of the OHSR 150 Cum Capacity etc. (Item No. NS)

Repair/ Replacement of Control Panel for 10 BHP Motor. (Item No. NS)

Providing house hold connection laying, jointing, fixing, testing MDPE Pipes (as approved by Engineer-in-charge) including cost of excavation, refilling , CI bib cock as per IS : 210 with stainless steel spindle, 20mm o/d MDPE Pipe 2.00 mtr. 15mm i/d GI Pipe 2.50 mtr.(length on average basis) 3" i/d clamp, GM Ferrule ISI marked connection of 15 mm i/d ferrule medium specials such as tees, bends, sockets, elbows, nipples (100 mm & 150 mm) union couplings, GI hooks etc. & C.I bib cock as per IS:210 with stainless steel spindle of approved make, MDPE Pipe lines laid in the ground or inside buildings, cutting, threading, making hole in wall and testing in trenches in the ground all materials should be approved make (to the approval of Engineer-in-charge) Complete Job in all respects including cost of carriage. (Refer CSR item No. 28.1, 28.36a, 28.34b, 30.65b (i) & NS Items) a) No. of Connections on existing Pipe Line

b) Repair of existing Connections

Painting/ Installation of Sign Board.

Credit of old Sluice Valve