PROVN OF CERTAIN ELECTRICAL WORKS MINOR WORKS AT BAMBOLIM CAMP ALTINHO MADGAON AND PONDA UNDER GE PANAJI GOA

Amount

Supplying, install and erect in true vertical position steel tubular swaged welded pole complete with MS base plate 6mm thick and of size 300x300mm, final taper, pole cap, bolts, nuts, washers & screws etc pole made out of ERW M.S tubing conforming to IS-2713 part-II type 410 SP-31 (9 metre long) including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block, each band of 300mm height at 300mm spacing, painting pole no the black paint by stenciled letters/ figures of 8cm height complete all as specified and directed. Note: - (i) The quoted rate includes staying the pole in a truly vertical position till the foundation is properly set. (ii) Excavation & foundation concrete, etc. will be measured and paid separately under the respective items of BOQ. Make:- Kalinga Tubes/Singh Profile/The National Tubing Co/India Tube &Co

Supply, laying, testing and commissioning of underground LT cable of size 2 core 6sqmm cross-sectional area, 1100 volt grade, XLPE insulated and PVC sheathed armoured, with multistranded aluminium conductor, heavy duty conforming to IS - 1554 Part – I including cable glands with suitable cable lugs and fixing arrangement with necessary clamps including material and labour for all jointing/ connecting material of required size, cable laid in trenches/ duct/ under plinth floors, fixed on wall/ poles passing through pipe complete all as specified and as directed. Make:- Havells/ Finolex/ Polycab/ Gloster/ Asian Cable Co/ CCI.

Excavation in trenches not exceeding 1.5metre wide and not exceeding 1.5metre in depth and getting out in soft/ loose soil for foundation of poles, stays, laying of cables, pipe etc. complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and as directed.

Removing surplus excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply, laying and spreading in layers dry clean river sand for cable cushioning with a layer of sand 8cm depth before laying the cable and 15cm depth after laying the cable punned down to a depth of 10cm above the top of the cable complete all as specified and as directed. Note:- Sand to be filled 23cm and carefully punned to 18 cm thickness. Punned thickness will be measured for the purpose of payment.

Supply and laying well burnt bricks sub class ‘B’ bricks laid flat, breadth wise along the length of cable in trenches for underground cable protection complete all as specified and as directed.

Material and labour for plain cement concrete type D2, 1:4:8 (using 40 mm graded crushed trap stone aggregate) as in foundations of electric pole including necessary form work and exposed surface finished even and fair without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded coarse aggregate for coping etc including fair finishing the exposed surfaces even and smooth without using extra cement, including necessary formwork complete all as specified and as directed.

Supply and fix street light/ security light single piece moulded SMC box of size 230 x 170 x 105mm outer and 200 x 140 x 95mm inner dimensions consisting of one SP MCB 10Amps 10 KA capacity in the MCB DB and 02 Nos ebonite insulator (1 phase and neutral) including aluminium strip for incoming and outgoing cable with necessary connection including all necessary fixing arrangements for fixing to LT pole ie necessary clamps, nuts, bolts and washers of suitable size for SMC Box complete all as specified and directed. Make for SMC Box: National/ Sintex/ Reliance. Make for MCB: Seimens/ Havells/ Legrand/ Schneider

Supply and fix Energy saving & Environmental friendly long life Varsatile pressure die cast aluminium IP66 LED street light fitting 60 watts with high power LED as light source of capacity 60 watts with suitable driver etc & connecting with 4.0 sqmm copper conductor PVC insulated three core weather proof cable etc, fixing to wall/ pole from fitting to junction box & including street light bracket made our of GI pipe of 40mm dia light grade not less than 1.5 mtr long, bent to shape as directed, fixed to pole/ wall in any position with flat iron clamps of size 25 x 4 mm, bolts, Nuts and washers etc complete all as specified and as directed. Make:- Bajaj Cat Part No ENXTP60LWWCRPCSD or equivalent make in Phillips, Havells, CG as approved by GE.

Supply and fix cross arms, bracing supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and including a coat of red oxide primer and one under coat and one finishing coat of aluminium paint complete all as specified and as directed.

Supply and fixing 1100 volts grade heavy duty two single core 4sqmm aluminum stranded conductor PVC insulated served with inner sheathing of PVC tape and overall PVC sheathed cable in service connection to light fitting to terminal box including taking out old unserviceable cable complete all as specified and directed. Make :- Havells/ Polycab/ Finolex/ Plaza

Excavation in trenches not exceeding 1.5metre wide and not exceeding 1.5metre in depth and getting out in hard/ dense soil for foundation of poles, stays, laying of cables, etc. complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/ dense soil complete all as specified and as directed.

Supply and laying HDPE Double wall corrugated (DWC) pipe heavy duty of outer dia 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable protection including bends complete all as specified and directed. Make: Rex Polyextrusion Ltd, Finolex, Supreme, Prince, Astral.

Supply and fix coupler for jointing the HDPE DWC pipe of size suitable for 50mm dia including necessary misc items required at site complete all as specified and directed. Make: Rex Polyextrusion Ltd, Finolex, Supreme, Prince, Astral.

Supply, laying, testing and commissioning of underground LT cable of size 4 core 16sqmm cross-sectional area, 1100 volt grade, XLPE insulated and PVC sheathed armoured, with multistranded aluminium conductor, heavy duty conforming to IS - 1554 Part – I including cable glands with suitable cable lugs and fixing arrangement with necessary clamps including material and labour for all jointing/ connecting material of required size, cable laid in trenches/ duct/ under plinth floors, fixed on wall/ poles passing through pipe complete all as specified and as directed. Make:- Havells/ Finolex/ Polycab/ Gloster/ Asian Cable Co/ CCI.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5m below ground level), connected to galvanised steel earthing lead wire 4mm dia, by means of bolts, nuts & check nuts and washers etc; GI pipe 15mm dia medium grade pipe for protection of GI earth lead wire, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR – 2009 Part-I, other end connected to electrical main switch board (inside the bldg)/ main DB earthing test point etc including GI protection pipe buried in ground, laid under floors/ plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150mm all around the earth plate, including PCC 1:2:4 type B-1 earth pit with MS angle iron frame, cast iron cover with locking arrangemenht, with GI 20mm dia light grade pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of soil/ strata & testing on completion including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed.

Note: - (a) Earth protection pipe & earthing lead upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. (b) On testing if desired earth resistance is not obtained earthing will be done on no extra cost.

Supply, installation, testing and commissioning Outdoor type CPRI Approved Feeder pillar box, factory fabrication totally enclosed, double door, made out of 3.15mm thick CRCA sheet metal of suitable size with MS angle iron frame made out of 40x40x6 mm, hinged panel board opening handles, locking arrangements, fully compartments used cut to size riveted, welded, bent to shape and cubical fabricated truly to box type, dust proof and vermin proof, provide sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provide PVC rubber bushes to spare holes, chromium incoming and outgoing provide aluminium bus bar using aluminium strips of adequate size extendable at both ends for current carrying capacity as in given below with back up kit kat fuse protection rating giving below for phases and ball capacity for neutral entire cubical treated with primer and epoxy powder coated, 3phase, 4 wire, 415 volts, 50 cycles system, including grouting panel legs in PCC 1:2:4 type B-1, complete with danger notice board with and including the following controls and accessories:-

(a) MCCB FP 100 Amps 25 KA 415 Volts - 01 No (Incommer) (Make:- Seimens/ Havells/ Legrand/ Schneider) (b) MCB FP 63 Amps 25 KA 415 Volts - 01 Nos (Outgoing) (Make:- Seimens/ Havells/ Legrand/ Schneider) (c) MCB SP 32 Amps 240 Volts - 02 Nos (Outgoing) (Make:- Seimens/ Havells/ Legrand/ Schneider (d) Aluminium busbar of 100 Amps -03 Nos on epoxy type insulations. (e) Indicator lamps - 01 set (Make:- Seimens/ AE/ L&T/ BCH) (f) Panel wiring complete with copper cable of suitable rating and size.

Material and labour for point wiring for one Light/ Fan/ Exhaust Fan controlled by one way switch complete with 1100Volts grade 1.50 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including white/ ivory colour heavy grade PVC casing -n capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces with distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

Supply and fix switch piano flush type, single pole, one way, 5Amps, 240 Volts, white finish complete all as specified and directed. Make: Anchor (Deluxe)/ Leader/ Bajaj/ Havells.

Supply and fix modular switch flush type, single pole, one way, 5Amps, 240 Volts, white finish of 1 module complete all as specified and directed. Make:- Anchor Roma/ Legrand/ Crabtree.

Supply and fix ceiling rose, surface bakelite of size 65mm x 50mm three terminals with and including PVC block complete all as specified and directed. Note:- Ceiling rose shall be fixed on PVC block white finish. Make: Anchor(Deluxe)/ Leader/ Bajaj/ Havells

Supply and fix wall mounted fan 450 mm sweep oscilation type with built in regulator fixed with suitable nut, bolts, washer etc and including making good the distureb surface with plastering and matching/ finishing surface with existing treatment over wall all as specified and directed. Make :- Havell's Cat Part No V3 or equivalent in Cromption/Bajaj as approved by GE.

Supply & Fix cord flexible 23/0.0076 copper wire including dismantling old unserviceable one as directed by Engr-in-charge. Make:- Plaza/ Finolex/ Polycab

Supply, install, testing and commissioning complete of submersible (openwell) type centrifugal pumpset of capacity 7.5 HP operating on 3 phase 420 Volts AC 50 Hz, mounted on PCC plotform of height not less than 30 centimetre from bottom of underground sump and fixed by suitable fastners/anchor bolts including provn of suitable starter and testing complete all as specified and as directed. Make :- Kirloskar/ Crompton/ KSB/ Jyoti

Supply and fix PVC insulated and PVC sheathed multi stranded copper conductor cable for submersible pump set, ISI marked confiorming to IS-864 of size 3 core 6 sqmm, 1100 volts grade including necessary water proof connection to submersible pump at cable lead complete all as specified and directed. Make :- Havells/ Anchor/ Polycab

Material and Labour for Cutting of cast iron pipes and reducing to required length before laying in position for insertion of new tees, branches, etc of existing CI/GI pipe of size up to 150 mm complete all as specified and as directed.

Material and labour cast iron specials confirming to IS such as Bends. Tapers. Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged up to 150 mm dia complete all as specified and as directed.

Supply and Laying 100mm bore galvanised iron steel water tubing of medium grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches and connecting including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. Note for serial item No 31 & 32:- (i) The quoted rates deemed to be inclusive of cutting, jointing and testing of the pipe. (ii) Excavation and earth work shall be measured and paid separately under relevant item of Schedule ‘A’. (iii) All other fittings required shall be provided by the contractor at his own cost. Make :- Tata/ Swastik/ Jindal/ Prakash

Supply and Laying only 80mm bore galvanised iron steel water tubing of medium grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches and connecting including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. Make :- Tata/ Swastik/ Jindal/ Prakash

Supply and fix 100mm dia cast iron sluice valve PN-1.6 conforming to IS 14846/ 2000, ISI Marked with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts etc. including dismantling of old unserviceable sluice valve fixed at any location complete all as specified and directed. Make :- Kirloskar/ Bir/ L&T/ Leader

Supply and fix 80mm dia cast iron sluice valve PN-1.6 conforming to IS 14846/ 2000, ISI Marked with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts etc. including dismantling of old unserviceable sluice valve fixed at any location complete all as specified and directed. Make :- Kirloskar/ Bir/ L&T/ Leader

Material & Labour for stone masonary walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:4 for pipe pillars/ post complete all as specified and directed by Engineer in charge. (Note:- The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2020)

Material & Labour for 15mm thick rendering in cement mortor 1:4 on concrete surfaces (both inner and outer surface) of wall, finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour 3mm thick MS sheet cover, welded to 50 mm x 50 mm x 6mm thick MS angle frame fixed with hold fasts in PCC 1:2:4 type B1, coping 50 mm thick in PCC (1:2:4) type B-1, 20mm x 6mm flat iron hinges with locking arrangement , MS handles and applying two coats of synthetic eanmel paint over a coat of red oxide zinc chrome primer to all steel surfaces including dismantling of old valve chambers covers complete all as specified and directed.

Material and labour for making opening/hole in wall suitable for fixing exhaust fan 300mm sweep including wooden bedding for fixing of exhaust fan and plastering finishing and making good the existing surface as per existing treatment complete all as specified and as directed.

Supply and Fixing exhaust fan, double ball bearing, ISI marked, metal body 250 mm sweep, single phase, 240 Volt AC, with louvers and shutters, including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal including grouting 4 Nos nut and full threaded bolt fixed on wall and all other accessories required at site and making good as per the requirement all as specified and directed. Make:- Bajaj / Havells /Crompton

Supply and Fix Ceiling fan BEE labelling 5 Star Rated Voltage single Phase, 220Volts AC. Frequency 50HZ Maximum Power Input 50 Watt sweep 1400 mm minimum air delivery 245 CFM with service value 6.00 BEE 5 star rated with standard fittings & accessories, Capacitor, double ball bearing, down Rod, canopy & other standard accessories for fitting of the fan complete all as specified and as directed. Note:- Certificate received from BEE mention input power, 5 star rating, air delivery and 2 year guarantee certificate will be submitted by the contractor. Make:- Bajaj/ Havells/ Crompton

Supply and Fixing exhaust fan, double ball bearing, ISI marked, metal body 300 mm sweep, single phase, 240 Volt AC, with louvers and shutters, including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal including grouting 4 Nos nut and full threaded bolt fixed on wall and all other accessories required at site and making good as per the requirement all as specified and directed. Make:- Bajaj / Havells /Crompton

Supply and Fixing post top lantern LED type 25 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make:- Bajaj Cat Part No BGCTN25WLEDWW or equivalent make in Havells/ Phillips as approved by GE.

Supply and fixing 50mm bore galvanised iron tubing medium grade for fixing Post Top Lantern complete all as specified and directed. Make :- Tata/ Swastik/ Jindal/ Prakash

Supply and fixing decorative, wall mounting light, antique brass finish fixture with opal glass diffuser suitable for and including 7.5 W A60 LED filament lamp E27 base complete all as specified and as directed. Make: Havells Cat Part No LHFOAJDITZITO60 or equivalent make in Bajaj/ Phillips including 7.5 watt LED filament lamp of Havells Cat Part No LHLDADHG3B807X5 or equivalent make in Bajaj/ Phillips as approved by GE.

Supply and fixing 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor cable FRLS of size 2 x 2.5 Sqmm and 1 x 1.5 sqmm for connection purpose, in existing GI pipe, complete all as specified and directed. Note:- Two run of 2.5 Sqmm cable and one run of 1.5 Sqmm cable shall be considered as one unit) Make:- Havells/ Plaza/ Finolex/ Polycab

Takshashila electricals

Tiwarinassociates