Provision of lighting arrangement, ESE type lightening arrestor along with partial wiring of Bermo Police Station old building and Back side Barrack building, Phusro under CCD, G.M. unit, Dhori Area

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and secured with as required : Above 10.00 Mtrs. & upto 12.00 Mtrs.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. : With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre 8 x 3.68

Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Supply and fixing of 16 sqmm aluminium cable.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 2 x 2.5 sq.mm

Supplying and fixing of 32mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group A a) Bulb point.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group A b) Tube light point

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group A c) Fan point

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group A d) Ex-haust fan point

Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ‘’C’’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole & neutral.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/isolator). : 6 way, double door.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 Amp TP&N.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required.

Supplying and fixing 3 pin, 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, etc. as required. (for light plugs ton be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, etc. as reqd.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire.

Supply of LED bulb 15 watt.

Supply and fixing of LED light 50 watt complete set.

Providing and fixing 25 mm x 5 mm dia G.I. strip on surface or in recess for connections etc. as required.

Tested and certified by CPRI (Central power research institute), Govt. of India for impulse current of (8/20us) in 70KA with 5 positive and 5 negative impulse. No external power supply will be provided. Protection radius upto 52 mtr. in level-3 and 57 mtr. in level-4, minimum height 5 mtr. of lighting arrestor with elevation rod, ESE lighting arrester to be stainless steel location

Providing and fixing of 6 digit non resistible lighting event counter with IP67 enclosure to count lighting strike.

Erection & maintenance of free earthing with following materials : Earthing electrode (outer dia 76mm and inner dia 40mm and strip size 14 x 6.3 mtr. long or 17.2 sqmm dia 3 mtr. logn copper bonded rod).

Providing of back fill compound 2 bag per site (25 Kg. per bag).

Providing and fixing 70mm x 6mm G.I. strip as required (approx 20 mtr. for each site).

Installation charge for ESE type lighting arrestor advance lighting arrestor.

Total impact of GST for the purpose of CTC

Balajee Traders (BID ID -1134146)