PROVN OF RAW WATER PIPE LINE FROM RAW WATER PUMP HOUSE TO ASHOKA PILLAR AND PROVN OF 2.0 TON SPLIT AC FOR X-RAY DEPT OF MH AT NDA KHADAKWASLA

Amount

Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out for taking out / laying of GI / CI pipe line and making bottom surfaces of excavation leveled and to a gradient.

Returning filling in including spreading levelling watering and well ramming lin layers not exceeding 25 cm after the pipes have been laid all as specified and directed.

Removing excavated material / soil to a distance n. exc 50 m above starting point complete all as specified and directed.

Supply and laying in trenches/on ground GI tubing 'Medium grade' of 80 mm bore with all fittings like Tee,socket,elbow etc complete ( excavation of earth work shall be measured and paid seperately.

Supply and laying in trenches/on ground GI tubing 'Medium grade' of 50 mm bore with all fittings like reducer Tee 50x 50x 15 mm,socket,elbow etc complete excavation of earth work shall be measured and paid seperately.

Cutting screwing existing steel tube insertion 80x80x100 mm Tee,shot nipple,union for branch connections of the internal dia 100mm alterations or additions if necessarily done in without taking down

M&L for ductile iron fittings such as bends (any type ,radius , angle) tapers any type (straight,bend, increasing, decreasing or double socket etc),Tee piece,single branch Y junction double branch collar,blank flanged etc caps and plugs etc as per IS:9523-2000 of class K-12 PN -10 with internal cement mortor lining and external cement motor lining and external zinc black bitumen coated of dia 80 mm complete all as specified and directed.

S & F stop valves 15mm bore cast copper alloy,screwed down ,high pressure ,with crutch or butterfly handle ,screwed both ends for iron pipe or for unions and fixed

S&F of sluice valve class PN 1.6 size 80mm bore, double flanged cast iron type with SS spindle, gun metal control nut, non rising type & cast iron wheel head both end flanged IS-1538 confirmed with rubber gasket, nuts, bolts & washer complete all as specified and directed

Ditto all as per item No. 9 above but 100 mm

S&F of Non return sluice valve class PN 1.6 size 80mm bore, double flanged cast iron type gun metal control nut, both end flanged IS-1538 (Part-I) marked complete with rubber gasket, nuts, bolts & washer complete all as specified and directed

S&F Mechanical joint collar/adaptor cylindrical shape of CI Pipe of having diameter of 100mm all as specified and directed

S & F nipples of 0.5 inch diameter 6 inch length suitable for DI Pipe complete all as specified and directed

M&L for cutting existing Road incl black top cover (trench) up to 0.5 Mtr depth and width not exc 30cm for laying of pipe line, refilling and making good after laying of pipe with removed soil and finally sealed with cement concrete of thickness not less than 150mm to match with the top surface of Road complete all as specified & Directed.

Dismantling interlocking tiles/paver blocks of any specifications and thickness, removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Dismantling of Stone slabs and granite tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for 60 mm thick glossy finished cement concrete coloured machine pressed interlocking pavers, blocks any shape & size conforming to IS- 15658- 2006 of M-35 grade as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as directed

M & L for (except paver blocks) 60 mm thick, and including a layer of 50 mm thick sand cushion including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed. (Note: Old paver blocks in good condition as retrived from respective item herein before shall be used.)

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx 25mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors

M&L granite (of any type) work (table rubbed 7 polished ) in window door cills/jambs , platform like in 15MM cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite 18 to 20 mm thick including taking down old one complete all as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (Using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) not exc 10cm in width and set and jointed in Cement Mortar (1:4) complete all as specified and directed.

M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC (1:3:6) ty C1grade design mix and setting in cement mortar (1:6) complete all as specified and as directed

M&L for plastering 15 mm thick in CM (1:6) finising even & smooth without using extra cement on wall complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills, ornamental and intricate design gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways ; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Fixing only framed work such as grills, ornamental and intricate design gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways ; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide all as specified and directed

M&L for 150mm thick approved quarried stone laid dry,except stone, in pavings, face hammer dressed, sides fitted fairly, hollows wedged in with stone chips and interstices filled with joints are grouted flush with cement mortar (1:6) complete all as directed.

M&L for 150mm thick approved quarried stone laid dry, in pavings, face hammer dressed, sides fitted fairly, hollows wedged in with stone chips and interstices filled with joints are grouted flush with cement mortar (1:6) complete all as directed.

M&L for providing plain cement concrete (1:4:8) type D2 (Using 40mm grade stone agg) as in foundation filling and mass concrete as in sub base complete all as directed.

Supply and install testing & commissioning Hi wall split type AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser dual invertor type compressor,copper tube condensing unit with CFC free gas for better indoor air quality with minimum 5 star rating of capacity 2TR single phase including additional copper piping, cabling work, insulation between indoor unit to outdoor unit and provision of MS Brackets for resting of outdoor units (where reqd) or making resting platform of outdoor unit by brick works complete all as directed. Make of Split Ac unit : Carrier/ Voltas/ Usha/Daikin/Hitachi.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make one of the following : V-Guard Model No AD5 bolt 9050/ Vinitec/Sen and Pandit/Microtek.

M&L for sub main wiring 3x4 sqmm ( phase , neutral and earth) PVC insulated (heavy duty) 1100 volts grade, FRLS grade with stranded copper conductor in & including PVC casing caping of suitable size not less than 25mm (3 run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit) all as specified and directed (from distribution board to metal clad switch socket point near AC)

M&L for PVC pipe 20 mm dia heavy duty with all fittings and fixing accesssories such as coupler, lock nut, saddle, pipe hook and laid on floor (for wash out line)

S&F for single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20Amp

M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.50mm and thickness of wall 50cm to 70cm for entry of suction and discharge pipes of AC and making good distarbed surfaces with cement morted and finally finished with plaster of parise and painted the distrubed surfaces with existing type of paint and tint complete all as directed.

M&L for mild steel rolled section connected with each other with welding (angle, tee, channel, beam, hollow sections etc) as in main and cross beams, hip verticle hollow sections and jack rafters, purlins where connected to common rafters and running rils where verticle suctions and fixed in welded in wallsin wall surface with plates and other verticle sections are fixed in ground level embedded in concrete fixed and horizontal sections fixed in wall with bolt completly, fixed with angle, cleats or other connecting plates conforming to Gde Fe -410-W (Gde E-250) quality-B complete all as specified

S & F pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall tixed with self tapping screws as specified and directed

M/S JEELANI ELECTRICALS

Aziz Traders

Takshashila electricals

SONU ENTERPRISES

Sparkh Electricals & Works

Sayili Enterprises