PROVISION OF SECURITY FENCING INCL GATES FOR PI MESS AND JCO ACCN INCLUDING CERTAIN REVENUE AND MINOR WORKS UNDER GE SAUGOR.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in hard/dense soil for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out complete all as specified and directed.

M&L for moorum/red bajri filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and directed

Removing excavated materials (soil) to a distance exc. 1.50 km and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specifed and directed.

M&L for RCC M-25 (Design Mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete, complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts and the like complete all as specified and directed.

M&L for RCC M-25 (Design Mix) using 20mm graded aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.

M&L for RCC M-25 (Design Mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and the like complete all as specified and directed.

M&L for RCC M-25 (Design Mix) using 20mm graded aggregates as in chajja and the like and the like complete all as specified and directed.

M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed..

All as per Srl item No.14 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders.

M&L for form work to sides & soffits of plinth beam and sides of footings getting for fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides of columns as in fair finished surfaces of concrete complete all as specified and directed

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. for fair finished surfaces of concrete flat complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc 200m thick (horizontal or sloping) fair finished surfaces of concrete flat complete all as specified and directed

M&L for formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs n exc 20 cm wide and side of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide for fair finished surfaces complete all as specified and directed..

M&L for bickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate ) as in sub base of floor complete all as specified and directed..

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stoneaggregate) 25 mm thick as in sub base to receive tiles complete all as specified and directed..

M&L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed

M&L for coloured glazed ceramic tiles in vertical surfaces 600mmx300mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick plaster in CM (1:4) complete all as specified and directed

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed

S&F steel ventilators with top hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F aluminum, anodized, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

S&F extruded aluminum alloy handle, fabricated type, anodized 125 mm size complete all as specified and directed.

S&F mild steel butt hinges 'medium weight', cold rolled mild steel 100 mm size complete all as specified and directed.

S&F 15mm bore galvanised mild steel tubes `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed

S&F 20mm bore galvanised mild steel tubes `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed

S&F bib taps 15 mm bore, cast copper alloy chromium plated with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed

S&F angle valve 15 mm bore cast copper alloy, chromium plated fancy type, with long shank & cup , cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed

S&F chromium plated two way bib cock with wall flange single lever screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. Make- Jaquar Cat No ; ORM-10041 or equivalent in Marc

S&F hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar or equavalent in Marc)

S&F vitreous China wash hand basin white flat back of size 550mmx400mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe complete all as specified and directed

S&F pillar taps 15 mm bore, cast copper alloy chromium plated with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed

S&F vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including PCC bedding, connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F vitreous China wash down Water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including white seat cover complete all as specified and directed

S&F PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore and brackets complete all as specified & directed.

S&F vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

S&F PVC connections 15 mm size and 450mm long/Brass/ PTMT nuts complete all as specified and directed

S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F stack clamps out of 50mmx5mm flat iron & 16mm dia round iron stays including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L for 75mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement provided with construction joint 10mmx20mm filled with bitumen and sand mortar 1:3 complete all as specified and directed

M&L for 15 mm thick cement plaster in CM 1:4 on even surface of brick wall/concrete surfaces mixed with 3% WPC finished even and smooth without using extra cement, complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately under respective items).

M&L for 15mm thick rendering in cement mortar 1:6 in other than fair faces of brick work finished even & smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

M&L for rendering 5 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying Birla / J. K. wall care white putty 1 mm thick for levelling the surfaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed . Make Asian ACE or equivalent make as approved by GE

M&L for prepration of newly plastered wall surfaces & applying Birla / J. K. wall care white putty 1 mm thick for levelling the surfaces of walls and applying two coat of distemper oil emulsion over a coat of wall primer complete all as specified & directed.

M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified & directed.

S&F 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified & directed.

M&L for concrete bed to drain pipes of 150mm bore using PCC 1:4:8, type D-1 (using 20mm graded stone aggregates) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in drains, coping, benching in man holes or similar work complete all as specified and directed.

M&L for pre cast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) as in cover slabs and lintels complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped end complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide, not exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes, etc., not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

All as per Srl item No.72 above but exc 1.50 M depth not exc 3.00m depth -ditto-

M&L for cutting into existing manholes for (dia 150mm ) connecting new or old drains making good to pipes and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4, type B1 smooth finished and reforming benching as required complete all as specified and directed

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick bats using subclass 'B' bricks for loose filling in soak wells etc complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

Excavation in post holes (or similar holes ) each not exc 0.5 cum getting out removing, surplus soil to distance not exc, 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edge & embedding of chain link fencing complete all as specified and directed

S&F MS angle iron as a fencing post, strut cutting tops in shape incl all necessary drilling, notching and reveting etc and similar work confirming FE - 410-0 complete all as specified and directed

Supply only 10 mm dia mild steel plain round bar as in line wire for chain link fencing complete all as specified and directed.

Supply only mild steel galvanized chain link fencing of 4mm dia wire and 75mm X 75mm mesh size complete all as specified and directed. Make:-TATA/SAIL/JINDAL

Fixing of chain link fencing including line wires any mesh size & type to any type of standards rail straining bolts including provision of binding wire complete all as specified and directed

S&F galvanized 2 strand 2.24mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins etc. complete all specified & shown on drawing (Each row of wire to be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin complete all as specified and directed

S&F mild steel screw bolts dia of neck 5 to 10 mm dia (machine made) with hexagonal or Square heads at one end and screwed the other or screwed both nds, each screwed end to be fitted with washers and one hexagonal or Square nut, length of bolt not exc. 5 cm complete all as specified and directed

S&F framed work as in door or gates of any section with gusset plates, rail braces etc complete, drilled forfixing of steel sheeting or other covering conforming to Fe 290 (Gde E 165) Door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting and hanginig also fasteninig and fixing copmlete all as specified and directed.

M&L for prepration of new surfaces of any description over10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for rendering 10mm thick on other than fair face of brickwork or concrete surfaces in cement mortar 1;4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1;4 complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortor 1:6 complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing the old decorated surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L for coloured dark shade anti skid ceramic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and not exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 15 mm thick screed bed in CM 1:6 complete etc complete all as specified and directed

M&L for coloured dark shade anti skid tiles exc. 0.18 sqm and not exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for 18mm to 20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like over 15mm thick cement mortor 1:4 set jointed in neat cement slurry with fastners including pointing in white cement mixed with pigment to match shade of the slabs complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed.

M&L for cement concrete 1:2:4, type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation of stay assy/ pole etc, including form work complete all as specified and directed

Supply only Parley 14 seater meeting table complete all as directed. Make:-Nilkamal (HSN/SAC code -9401) or equivalent make as approved by GE

Supply only Thames high back mesh chair black complete all as directed. Make:-Nilkamal (HSN/SAC code -9401) or equivalent make as approved by GE

M&L for concealed point wiring for the following with 1.5 Sqmm PVC(FR) insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green complete all as specified and directed:-

For one light point controlled by one switch

For one 3 pin, 5 Amp socket point on same board

For one 5 Amp independent socket point controlled by one switch

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F socket outlet, 5 pin, 5 Amp flush, 230 volt complete all as specified and directed

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal complete all as specified and directed

S&F lamp holder pvc insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb complete all as specified and directed

S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.108 above SPN 32- 63 Amps, 240 V -ditto-

S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet/ Bajaj cat part No BCLSB 20 WH/ CG Cat part No LCTC-18-CDL

S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part no LHEXCGP7UN5W013/BAJAJ cat part No BIBWP10WLED /CG cat part No LBHE-10-CDL.

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. Make Havells Cat Part No LHEXBLP7IN1W009/ Bajaj cat part No BCLSB10WH/ CG Cat part No LCTL-9-CDL.

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body complete all as specified and directed. Make:- Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 6 sqmm, 2 core complete all as specified and directed

S&F GI tubing of size 25 mm bore, medium grade, ISI marked with all GI fittings (medium grade) laid in trenches, floors, etc complete all as specified and directed .

S&F Gun metal Gate valve iron wheel head both end screwed of size 25 mm bore for iron pipe approved complete all as specified and directed.

Cutting existing GI tubing for alterations ,screwing existing tube size of 40mm and 50 mm dia for new connection including earth work and clamp, neccessory fitting as per site required complete all as specified and directed..

Supply, laying, connecting and testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 16 Sqmm 4 core complete all as specified and directed

All as per Srl item No 119 but of size 10 sqmm, 2 core -ditto-

Supply and erection of steel tubular poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, 9 metre long complete all as specified and directed

S&F tubes galvanised 40 mm bore light grade bent to the shape of bracket 1.2 Mtr in length for mounting of street light fitting and fixed on pole with clamp and nut, bolt and washer with two coat paint complete all as specified and directed.

S&F junction box Single Pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size 12"x10"x4" complete all as specified and directed. Make - Sintex/Hansal

M&L for sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

M&L for sand cushioning with dry and clean over and under the cable for protection of cable complete all as specified and directed. Note:-Punned thickness shall be measured and paid

S&F galvanized iron pipe light grade (ISI marked) of 40mm bore with all fittings laid in trenches or on pole/crossing of road/fixed on wall for cable protection complete all as specified and directed

S&F in round flexible copper cable of size 1.5 sqmm 3 core, 1100 volt grading complete all as specified and directed

S&F LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass. LED shall be having LM-79 and LM-80 complied as per L-70 standard. Maximum power consumption shall not exceed 60W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2 core as required. (ii) Contractor shall produce warrinty certificate of association with LED manufacturer for minimum two years. Make of LED light fitting : Havells Cat part No ENDURAPEARLNEOSL60WLED757PASYTOPCASTHO (60 Watt LED, 5700 K )/Wipro cat part No LR02-671-XXX-57-G2/CG cat part No LSTP-60-CDL/Halonix Cat Part No HLSLD-15-60-CWL-R

M&L for earthling complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 meters below normal ground level surrounded from all sides by mixture of charcoal & common salt & electrode connected to and including galvanised earth lead 4.0 mm dia as earthling lead by means of bolts, nuts, check-nuts, and washers of galvanised iron and GI protection pipe light grade 40 mm dia connected to earth point , GI pipe light grade 20 mm dia for watering funnel with wire mesh all as specified & indicated in Electric plate no 3 of SSR 2009 part I complete all as specified and directed.