SPL REPAIRS TO 06 X TOILET BLOCKS OF 1 TRG REGT, 2 TRG REGT, 3 TRG REGT AND MT REGT AT ARTY CENTER UNDER GE GOLCONDA

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n.exc. 1.5 sqm complete all as specified and directed

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F for 100 mm long aluminium butt hinges fixed to PVC door shutter complete all as specified and directed

S&F 150mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 125 mm length of extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F in repairs Vitreous China squatting pan , "Orissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 110mm dia PVC SWR 'P' or 'S' trap complete including provision of cement concrete all as specified and directed

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm dia CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed

S&F in repair oval type vitreous china counter wash basin, white of size 450 x 300mm including 01 nos cast copper alloy 15mm CP swan neck fancy pillar tap, 01 nos 32mm waste coupling fixed ove and including suiatble size granite 25mm thick not less than 1650 x 650 place over half brick wall with bearing in side walls complete all as specified and directed

S & F in repair vitreous china urinal, bowl type, flat back size of 465 x 355 x 265mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing grating and Union for discharge pipe complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm

S&F PVC waste pipe for urinal/WHB with complete fitting etc 38 mm dia. 60mm long.

S&F in repair 15 mm dia fancy type bib tap cast copper alloy chromium plated type screwed down, screwed for iron pipe or for brass ferrule complete all as specifie and directed.

S&F in repairs 15 mm dia Brass Stop valves/angle cock chromium plated fancy type, screwed down, high pressure, with crutch or butterfly hadle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F GI tube 15mm dia medium grade with all fitings, fixed to wall, celing or laying in trenches including taking up or down existing GI pipe complete all as specified and directed

S&F GI tube 20mm dia medium grade with all fitings and fixed to wall, celing or laying in trenches including taking up or down existing GI pipe complete all as specified and directed

S&F GI tube 40mm dia medium grade with all fitings and fixed to wall, celing or laying in trenches including taking up or down existing GI pipe complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) of 2000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed

S&F PVC ball valve 25 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball, screwed for iron pipe and fixed complete all as specified and directed (minimum weight 25 mm- 455 gms)

S&F in repair 40mm dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe fixed to wall or laid in trenches including dismasntling existing pipes (with fittings) complete all as specified and directed.

S&F PVC (SWR) bends any radious 110 mm dia completee all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends with access door any radius 110mm bore.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm.

S&F PVC (SWR) junction double (double Y) equal or unequal with access door of bore 110mm.

S&F PVC(SWR) vent cowl 110mm bore.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches including dismasntling existing pipes (with fittings) complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends any radious 75 mm dia completee all as specified.

S&F PVC (SWR) bends with access door any radious 75 mm dia completee all as specified.

S&F PVC (SWR) junction double (double Y) equal or unequal with access door of bore 75mm.

S&F PVC (SWR) junction doyble (double T) equal or unequal with access door of bore 75mm

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges complete all as specified and as directed.

Demolition of brick work or stone masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub class old half brick size straight or curved on plan exc 6 m mean radius in cement mortar 1:4.

Taking down cement plaster on brick wall/stone wall, ceiling etc, raking out joints, hacking for key & scrubbing with water complete all as specified and directed by Engr-in-Charge.

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick surfaces of walls, surface finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick of walls, surface finished fair and even complete all as specified and directed by Engr-in-Charge. Note: WPC shall be measured and paid separately.

M&L Rendering 5 mm thick in CM 1:3 on fair faces of concrete surfaces as in ceiling, finished fair and even complete all as specified and directed by Engr-in-Charge.

M&L for Preparing Newly plastered surfaces of walls and applying three coats of white wash complete and all as specified and directed by Engr-in-Charge.

M&L for Preparing Old plastered wall surfaces and applying One coat of white wash complete and all as specified and directed by Engr-in-Charge.

M&L for Praparation of Newly plastered surfaces of walls and applying Two coats of Cement base paint complete and all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment and praparation of Old plastered surfaces of walls and applying One coat of Cement base paint complete and all as specified and directed by Engr-in-Charge.

M&L for praparation of newly plastered surfaces and applying Three coats of White wash on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for praparation of old plastered surfaces and applying One coat of White wash on Ceiling complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame glazed with putty or fixed with beads.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beeds .

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M & L for steel window with side hung double shutters including projecting type hinges with steel handle and peg stay complete with glazing bars dovtailed or welded complete all as specified and directed.

S&F of steel ventilators with top hung duoble shutter glazed and gauzed, bottom half fixed type including hinges, steel peg stay complete.

S&F for Collapsible steel gates, top hung, sliding type consisting of channel pickets, pivoted flat bars, top and bottom runners, MS handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L 25 mm thick PCC 1:2:4 Type Bo (usng 12.5mm graded stone aggregate) below files for levelling of exixting surface complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M & L glazed ceramic tiles 300mmx200mmx7mm thick fixed on vetical surfaces over and including 10mm thick back coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75mm thick as in plinth protection.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) as in sub base to floor complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

M&L for MS TMT bars, 10mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire all as specified.

M&L for MS TMT bars, 6 to 8mm dia cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire all as specified.

M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforcement shall be measured and paid seprately) complete all as specefied and directed.

M&L for Cement concrete (1:3:6) type C2 (using 40mm aggregate) in coping, benching etc including necessary form work complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard and dense soil.

Demolition and breaking up drain pipes, 150mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including bedding and haunching complete.

M&L for salt glazed stoneware drain pipes 150mm dia bore (Grade 'A' pipe) laid in trenches and jointed as specified.

M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with all kind of soil.

M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

M&L chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down completely existing treatment along with plaster as in sunken slabs vertical faces.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) & surface even & smooth using extra cement with IWPC (IWPC measured and paid seperately) as in sunken slabs

M&L for applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2kg/Sqm including cleaning surface complete all as specified.

M&L for 15mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement with IWPC (IWPC measured and paid separately) as in sunken slab.

S&F low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm as in spouts for sunken slabs complete all as specified and directed.

M&L cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings.

Supply only integral water proofing compound.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet 1.60 mm, etc complete all as specified and directed.

M&L walling of random rubble Secunderabad pattern, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like.

Use and waste of Formwork to soffits of suspended concrete slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of flat concrete, etc complete all as spd and directed.

Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide for rough finished surfaces of concrete, etc complete all as specified and directed.

M&L for RCC (Nominal mix) 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintel bands, roof beams and cantilevers complete all as specified and dirceted.

Use and waste of Form work to sides and soffits of floor or roof beams, lintels, shelves including supports, overhungs etc. for flat rough finished surfaces completed all as specified and directed.

Taking down carefully existing point wiring of any description for (light, fan, sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets, fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc complete all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for surface type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. complete all as specified and directed at site .

M&L for point wiring for One 5 pin 5/6 Amps switch socket outlet on independent board controlled by one switch complete with two runs of 1.5 Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLS cable of 1100V grade conforming to IS - 694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked of suitable dia (not less than 20mm dia) with conduit accessories, surface type on wall/floor and fixed on ceiling/ roof/ truss/ columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti-corrosive paint for housing the switches, sockets, fan regulator etc and covered with 3 mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc., complete concealed in walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc. making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item no. 95 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed by the Engr-in-charge.

All as per item no. 95 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with two runs of 2.5 sqmm PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated sheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed by the Engr-in-charge.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed at site.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

S&F 9 W LED bulb of base B22 with color temp 6500K all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete.

S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

M&L Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed.

S&F in repair bracket suitable for fixing of security light fitting made out from 40 mm bore GI pipe, medium grade 2 metre in length (approx), made to shape as required, fixed to pole/wall with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation, PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber, provn of PCC cover 40 mm thick 1:2:4 mm type B1, funnel with water Pipe, GI pipe 15mm dia medium grade as protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge.

Sri Lakshmi Enterprises

Sumpoorthy Engineers

SANJEEV CONSTRUCTIONS

BUILDWEL

M/S Veerabhadra Constructions

NAVANAND ENTERPRISES

RAFEEQ AND CO